linux/drivers/usb, branch v5.5

Merge tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

2020-01-17T18:40:06Z

Johan writes: USB-serial fixes for 5.5-rc7 Here are a few fixes for issues related to unbound port devices which could lead to NULL-pointer dereferences. Notably the bind attributes for usb-serial (port) drivers are removed as almost none of the drivers can handle individual ports going away once they've been bound. Included are also some new device ids. All but the unbound-port fixes have been in linux-next with no reported issues. Signed-off-by: Johan Hovold * tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: quatech2: handle unbound ports USB: serial: keyspan: handle unbound ports USB: serial: io_edgeport: add missing active-port sanity check USB: serial: io_edgeport: handle unbound ports on URB completion USB: serial: ch341: handle unbound port at reset_resume USB: serial: suppress driver bind attributes USB: serial: option: add support for Quectel RM500Q in QDL mode USB: serial: opticon: fix control-message timeouts USB: serial: option: Add support for Quectel RM500Q USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx

USB: serial: quatech2: handle unbound ports

2020-01-17T15:22:59Z

Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable # 3.5 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: keyspan: handle unbound ports

2020-01-17T15:22:58Z

Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: io_edgeport: add missing active-port sanity check

2020-01-17T15:22:57Z

The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: io_edgeport: handle unbound ports on URB completion

2020-01-17T15:22:57Z

Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: ch341: handle unbound port at reset_resume

2020-01-17T15:22:45Z

Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable # 2.6.30 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: suppress driver bind attributes

2020-01-17T10:11:26Z

USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes. Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: option: add support for Quectel RM500Q in QDL mode

2020-01-16T15:54:34Z

Add support for Quectel RM500Q in QDL mode. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 24 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 0.00 S: Manufacturer=Qualcomm CDMA Technologies MSM S: Product=QUSB_BULK_SN:xxxxxxxx S: SerialNumber=xxxxxxxx C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is assumed that the ZLP flag required for other Qualcomm-based 5G devices also applies to Quectel RM500Q. Signed-off-by: Reinhard Speyerer Cc: stable Signed-off-by: Johan Hovold

usb: core: hub: Improved device recognition on remote wakeup

2020-01-15T12:14:28Z

If hub_activate() is called before D+ has stabilized after remote wakeup, the following situation might occur: __ ___________________ / \ / D+ __/ \__/ Hub _______________________________ | ^ ^ ^ | | | | Host _____v__|___|___________|______ | | | | | | | \-- Interrupt Transfer (*3) | | \-- ClearPortFeature (*2) | \-- GetPortStatus (*1) \-- Host detects remote wakeup - D+ goes high, Host starts running by remote wakeup - D+ is not stable, goes low - Host requests GetPortStatus at (*1) and gets the following hub status: - Current Connect Status bit is 0 - Connect Status Change bit is 1 - D+ stabilizes, goes high - Host requests ClearPortFeature and thus Connect Status Change bit is cleared at (*2) - After waiting 100 ms, Host starts the Interrupt Transfer at (*3) - Since the Connect Status Change bit is 0, Hub returns NAK. In this case, port_event() is not called in hub_event() and Host cannot recognize device. To solve this issue, flag change_bits even if only Connect Status Change bit is 1 when got in the first GetPortStatus. This issue occurs rarely because it only if D+ changes during a very short time between GetPortStatus and ClearPortFeature. However, it is fatal if it occurs in embedded system. Signed-off-by: Keiya Nobuta Cc: stable Acked-by: Alan Stern Link: https://lore.kernel.org/r/20200109051448.28150-1-nobuta.keiya@fujitsu.com Signed-off-by: Greg Kroah-Hartman

USB: serial: opticon: fix control-message timeouts

2020-01-14T11:05:44Z

The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on open() or tiocmset() due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: 309a057932ab ("USB: opticon: add rts and cts support") Cc: stable # 2.6.39 Cc: Martin Jansen Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold