linux/drivers/usb, branch v6.0

uas: ignore UAS for Thinkplus chips

2022-09-27T08:50:29Z

The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence performance and trigger kernel panic on several platforms with the following error message: [ 39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000 1b000000 05038000 [ 720.545894][13] Workqueue: usb_hub_wq hub_event [ 720.550971][13] ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880 26cb80000 [ 720.559673][13] ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880 26cb80000 [ 720.568374][13] ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880 26ca880f8 [ 720.577076][13] Call Trace: [ 720.580201][13] [] schedule+0x35/0x80 [ 720.586137][13] [] schedule_preempt_disabled+0xe/0x10 [ 720.593623][13] [] __mutex_lock_slowpath+0x164/0x1e0 [ 720.601012][13] [] mutex_lock+0x2f/0x40 [ 720.607141][13] [] usb_disconnect+0x59/0x290 Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Acked-by: Alan Stern Cc: stable Signed-off-by: Hongling Zeng Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw Signed-off-by: Greg Kroah-Hartman

usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS

2022-09-27T08:50:27Z

The UAS mode of Hiksemi USB_HDD is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern Cc: stable Signed-off-by: Hongling Zeng Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman

uas: add no-uas quirk for Hiksemi usb_disk

2022-09-27T08:50:24Z

The UAS mode of Hiksemi is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern Cc: stable Signed-off-by: Hongling Zeng Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman

usb: dwc3: st: Fix node's child name

2022-09-27T08:50:01Z

Update node's child name from "dwc3" to "usb", this fixes the following issue: [3.773852] usb-st-dwc3 8f94000.dwc3: failed to find dwc3 core node Fixes: 3120910a099b ("ARM: dts: stih407-family: Harmonize DWC USB3 DT nodes name") Reported-by: Jerome Audu Signed-off-by: Patrice Chotard Link: https://lore.kernel.org/r/20220926124359.304770-1-patrice.chotard@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Remove incorrect warning

2022-09-27T08:50:01Z

Sink only devices do not have any source capabilities, so the driver should not warn about that. Also DRP (Dual Role Power) capable devices, such as USB Type-C docking stations, do not return any source capabilities unless they are plugged to a power supply themselves. Fixes: 1f4642b72be7 ("usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4") Reported-by: Paul Menzel Cc: Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20220922145924.80667-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-serial-6.0-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

2022-09-22T13:43:18Z

Johan writes: "USB-serial fixes for 6.0-rc7 Here are some new modem device ids. All have been in linux-next with no reported issues." * tag 'usb-serial-6.0-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel RM520N USB: serial: option: add Quectel BG95 0x0203 composition

usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLY

2022-09-22T13:21:03Z

Building without CONFIG_POWER_SUPPLY will fail: drivers/usb/typec/anx7411.o: In function `anx7411_detect_power_mode': anx7411.c:(.text+0x527): undefined reference to `power_supply_changed' drivers/usb/typec/anx7411.o: In function `anx7411_psy_set_prop': anx7411.c:(.text+0x90d): undefined reference to `power_supply_get_drvdata' anx7411.c:(.text+0x930): undefined reference to `power_supply_changed' drivers/usb/typec/anx7411.o: In function `anx7411_psy_get_prop': anx7411.c:(.text+0x94d): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/anx7411.o: In function `anx7411_i2c_probe': anx7411.c:(.text+0x111d): undefined reference to `devm_power_supply_register' drivers/usb/typec/anx7411.o: In function `anx7411_work_func': anx7411.c:(.text+0x167c): undefined reference to `power_supply_changed' anx7411.c:(.text+0x1b55): undefined reference to `power_supply_changed' Add POWER_SUPPLY dependency to Kconfig. Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Reviewed-by: Xin Ji Acked-by: Heikki Krogerus Signed-off-by: Ren Zhijie Link: https://lore.kernel.org/r/20220920084431.196258-1-renzhijie2@huawei.com Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Quectel RM520N

2022-09-13T12:40:59Z

add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry meng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: option: add Quectel BG95 0x0203 composition

2022-09-13T12:36:28Z

Add support for the following Quectel BG95 composition: 0x0203: Diag + GNSS + Modem + ECM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA

2022-09-07T14:30:35Z

On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core doesn't support 64-bit DMA address width. In this case, this driver should use the default 32-bit mask. Otherwise, the DWC3 controller will break if it runs on above 4GB physical memory environment. This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which used for the DMA address width, and only configure 64-bit DMA mask if the DWC_USB3_AWIDTH is 64. Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver") Cc: stable Reviewed-by: Sven Peter Signed-off-by: William Wu Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@rock-chips.com Signed-off-by: Greg Kroah-Hartman