linux/drivers/usb, branch v6.8

xhci: Fix failure to detect ring expansion need.

2024-03-05T13:47:08Z

Ring expansion checker may incorrectly assume a completely full ring is empty, missing the need for expansion. This is due to a special empty ring case where the dequeue ends up ahead of the enqueue pointer. This is seen when enqueued TRBs fill up exactly a segment, with enqueue then pointing to the end link TRB. Once those TRBs are handled the dequeue pointer will follow the link TRB and end up pointing to the first entry on the next segment, past the enqueue. This same enqueue - dequeue condition can be true if a ring is full, with enqueue ending on that last link TRB before the dequeue pointer on the next segment. This can be seen when queuing several ~510 small URBs via usbfs in one go before a single one is handled (i.e. dequeue not moved from first entry in segment). Expand the ring already when enqueue reaches the link TRB before the dequeue segment, instead of expanding it when enqueue moves into the dequeue segment. Reported-by: Chris Yokum Closes: https://lore.kernel.org/all/949223224.833962.1709339266739.JavaMail.zimbra@totalphase.com Tested-by: Chris Yokum Fixes: f5af638f0609 ("xhci: Fix transfer ring expansion size calculation") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240305132312.955171-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: port: Don't try to peer unused USB ports based on location

2024-03-05T13:21:15Z

Unused USB ports may have bogus location data in ACPI PLD tables. This causes port peering failures as these unused USB2 and USB3 ports location may match. Due to these failures the driver prints a "usb: port power management may be unreliable" warning, and unnecessarily blocks port power off during runtime suspend. This was debugged on a couple DELL systems where the unused ports all returned zeroes in their location data. Similar bugreports exist for other systems. Don't try to peer or match ports that have connect type set to USB_PORT_NOT_USED. Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486 Tested-by: Paul Menzel Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Mathias Nyman Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218490 Link: https://lore.kernel.org/r/20240222233343.71856-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: ncm: Fix handling of zero block length packets

2024-03-05T13:20:40Z

While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX set to 65536, it has been observed that we receive short packets, which come at interval of 5-10 seconds sometimes and have block length zero but still contain 1-2 valid datagrams present. According to the NCM spec: "If wBlockLength = 0x0000, the block is terminated by a short packet. In this case, the USB transfer must still be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent, and the size is a multiple of wMaxPacketSize for the given pipe, then no ZLP shall be sent. wBlockLength= 0x0000 must be used with extreme care, because of the possibility that the host and device may get out of sync, and because of test issues. wBlockLength = 0x0000 allows the sender to reduce latency by starting to send a very large NTB, and then shortening it when the sender discovers that there’s not sufficient data to justify sending a large NTB" However, there is a potential issue with the current implementation, as it checks for the occurrence of multiple NTBs in a single giveback by verifying if the leftover bytes to be processed is zero or not. If the block length reads zero, we would process the same NTB infintely because the leftover bytes is never zero and it leads to a crash. Fix this by bailing out if block length reads zero. Cc: stable@vger.kernel.org Fixes: 427694cfaafa ("usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call") Signed-off-by: Krishna Kurapati Reviewed-by: Maciej Żenczykowski Link: https://lore.kernel.org/r/20240228115441.2105585-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group

2024-03-05T13:12:51Z

The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera Link: https://lore.kernel.org/r/20240229001101.3889432-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices

2024-03-05T13:08:51Z

While commit 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset") fixes the boot issues for bus powered devices such as LibreTech Renegade Elite/Firefly, it trades off the CC pins NOT being Hi-Zed during errory recovery (i.e PORT_RESET) for devices which are NOT bus powered(a.k.a self powered). This change Hi-Zs the CC pins only for self powered devices, thus preventing brown out for bus powered devices Adhering to spec is gaining more importance due to the Common charger initiative enforced by the European Union. Quoting from the spec: 4.5.2.2.2.1 ErrorRecovery State Requirements The port shall not drive VBUS or VCONN, and shall present a high-impedance to ground (above zOPEN) on its CC1 and CC2 pins. Hi-Zing the CC pins is the inteded behavior for PORT_RESET. CC pins are set to default state after tErrorRecovery in PORT_RESET_WAIT_OFF. 4.5.2.2.2.2 Exiting From ErrorRecovery State A Sink shall transition to Unattached.SNK after tErrorRecovery. A Source shall transition to Unattached.SRC after tErrorRecovery. Fixes: 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset") Cc: stable@vger.kernel.org Cc: Mark Brown Signed-off-by: Badhri Jagan Sridharan Tested-by: Mark Brown Link: https://lore.kernel.org/r/20240228000512.746252-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices

2024-03-05T13:08:38Z

On SM8550 and SM8650 Qualcomm platforms a call to UCSI_GET_PDOS for non-PD partners will cause a firmware crash with no easy way to recover from it. Add UCSI_NO_PARTNER_PDOS quirk for those platform until we find a way to properly handle the crash. Signed-off-by: Neil Armstrong Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240223-topic-sm8550-upstream-ucsi-no-pdos-v1-1-8900ad510944@linaro.org Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command

2024-03-02T19:32:03Z

The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values in the ATA ID information to calculate cylinder and head values when creating a CDB for READ or WRITE commands. The calculation involves division and modulus operations, which will cause a crash if either of these values is 0. While this never happens with a genuine device, it could happen with a flawed or subversive emulation, as reported by the syzbot fuzzer. Protect against this possibility by refusing to bind to the device if either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID information is 0. This requires isd200_Initialization() to return a negative error code when initialization fails; currently it always returns 0 (even when there is an error). Signed-off-by: Alan Stern Reported-and-tested-by: syzbot+28748250ab47a8f04100@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-usb/0000000000003eb868061245ba7f@google.com/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: PrasannaKumar Muralidharan Reviewed-by: Martin K. Petersen Link: https://lore.kernel.org/r/b1e605ea-333f-4ac0-9511-da04f411763e@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-02-25T18:41:57Z

Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.8-rc6 to resolve some reported problems. These include: - regression fixes with typec tpcm code as reported by many - cdnsp and cdns3 driver fixes - usb role setting code bugfixes - build fix for uhci driver - ncm gadget driver bugfix - MAINTAINERS entry update All of these have been in linux-next all week with no reported issues and there is at least one fix in here that is in Thorsten's regression list that is being tracked" * tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tpcm: Fix issues with power being removed during reset MAINTAINERS: Drop myself as maintainer of TYPEC port controller drivers usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role" usb: gadget: omap_udc: fix USB gadget regression on Palm TE usb: dwc3: gadget: Don't disconnect if not started usb: cdns3: fix memory double free when handle zero packet usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() usb: roles: don't get/set_role() when usb_role_switch is unregistered usb: roles: fix NULL pointer issue when put module's reference usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers usb: cdnsp: blocked some cdns3 specific code usb: uhci-grlib: Explicitly include linux/platform_device.h

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-02-24T17:49:16Z

Pull SCSI fixes from James Bottomley: "Six fixes: the four driver ones are pretty trivial. The larger two core changes are to try to fix various USB attached devices which have somewhat eccentric ways of handling the VPD and other mode pages which necessitate multiple revalidates (that were removed in the interests of efficiency) and updating the heuristic for supported VPD pages" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: jazz_esp: Only build if SCSI core is builtin scsi: smartpqi: Fix disable_managed_interrupts scsi: ufs: Uninitialized variable in ufshcd_devfreq_target() scsi: target: pscsi: Fix bio_put() for error case scsi: core: Consult supported VPD page list prior to fetching page scsi: sd: usb_storage: uas: Access media prior to querying device properties

usb: typec: tpcm: Fix issues with power being removed during reset

2024-02-20T08:14:36Z

Since the merge of b717dfbf73e8 ("Revert "usb: typec: tcpm: fix cc role at port reset"") into mainline the LibreTech Renegade Elite/Firefly has died during boot, the main symptom observed in testing is a sudden stop in console output. Gábor Stefanik identified in review that the patch would cause power to be removed from devices without batteries (like this board), observing that while the patch is correct according to the spec this appears to be an oversight in the spec. Given that the change makes previously working systems unusable let's revert it, there was some discussion of identifying systems that have alternative power and implementing the standards conforming behaviour in only that case. Fixes: b717dfbf73e8 ("Revert "usb: typec: tcpm: fix cc role at port reset"") Cc: stable Cc: Badhri Jagan Sridharan Signed-off-by: Mark Brown Acked-by: Heikki Krogerus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20240212-usb-fix-renegade-v1-1-22c43c88d635@kernel.org Signed-off-by: Greg Kroah-Hartman