linux/drivers/video/fbdev/omap2, branch v3.19

OMAPDSS: SDI: fix output port_num

2014-12-30T09:18:30Z

After the commit ef691ff48bc8 (OMAPDSS: DT: Get source endpoint by matching reg-id) we look for the SDI output using the port number. However, the SDI driver doesn't set the port number, which causes the SDI display to not initialize. Fix this by setting the SDI port number to 1. We use a hardcoded value, as SDI was used only on OMAP3 and it's always port number 1 there. Reported-by: Aaro Koskinen Reported-by: Pavel Machek Signed-off-by: Tomi Valkeinen

OMAPDSS: pll: NULL dereference in error handling

2014-12-29T08:06:55Z

The regulator_disable() doesn't accept NULL pointers. Signed-off-by: Dan Carpenter Signed-off-by: Tomi Valkeinen

OMAPDSS: HDMI: remove double initializer entries

2014-12-29T08:06:55Z

HDMI hardware parameters structs for OMAP4 and OMAP5 contained two initializers for 'clkdco_max'. The first one was a remnant with wrong value. Remove the extra initializer entries. Signed-off-by: Tomi Valkeinen

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09Z

Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev__once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...

Merge branches '3.19/omapdss' and '3.19/simplefb' into fbdev

2014-12-08T07:16:31Z

Merge fbdev topic branches.

video: fbdev-OMAP2: Deletion of unnecessary checks before the function call "i2c_put_adapter"

2014-12-04T14:16:01Z

The i2c_put_adapter() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Tomi Valkeinen

OMAPDSS: hdmi5: Fix bit field for IEC958_AES2_CON_SOURCE

2014-12-04T09:17:24Z

The bit field for IEC958_AES2_CON_SOURCE is bits 3-0 in HDMI_CORE_FC_AUDSCHNLS2, not imaginary bits 3-4 (reverse order). Signed-off-by: Jyri Sarha Signed-off-by: Tomi Valkeinen

OMAPDSS: hdmi: Remove __exit qualifier from hdmi_uninit_output()

2014-12-02T12:16:05Z

Remove __exit qualifier from hdmi_uninit_output() because it is used also in omapdss_hdmihw_probe(). Signed-off-by: Jyri Sarha Signed-off-by: Tomi Valkeinen

OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback

2014-12-01T09:10:02Z

Enabling idle mode during audio playback causes the glitches on OMAP5 HDMI. The TRM also suggests to use no-idle for HDMI audio playback. This patch sets HDMI idle mode to no-idle for the duration of the playback, and restores it back to original value afterwards. Signed-off-by: Jyri Sarha Reviewed-by: Mark Brown Signed-off-by: Tomi Valkeinen

OMAPDSS: Remove all references to obsolete HDMI audio callbacks

2014-12-01T09:09:59Z

In new model these callbacks are obsolete since the ASoC component drivers are integrated into the HDMI drivers and no callbacks are needed anymore. Signed-off-by: Jyri Sarha Reviewed-by: Mark Brown Signed-off-by: Tomi Valkeinen