linux/drivers/video/fbdev, branch v6.8

Merge tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2024-03-05T20:38:50Z

Pull hyperv fixes from Wei Liu: - Multiple fixes, cleanups and documentations for Hyper-V core code and drivers * tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: make hv_bus const x86/hyperv: Allow 15-bit APIC IDs for VTL platforms x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad() x86/mm: Regularize set_memory_p() parameters and make non-static x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback Documentation: hyperv: Add overview of PCI pass-thru device support Drivers: hv: vmbus: Update indentation in create_gpadl_header() Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header() fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem() Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC

fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()

2024-03-01T08:19:11Z

A recent commit removing the use of screen_info introduced a logic error. The error causes hvfb_getmem() to always return -ENOMEM for Generation 2 VMs. As a result, the Hyper-V frame buffer device fails to initialize. The error was introduced by removing an "else if" clause, leaving Gen2 VMs to always take the -ENOMEM error path. Fix the problem by removing the error path "else" clause. Gen 2 VMs now always proceed through the MMIO memory allocation code, but with "base" and "size" defaulting to 0. Fixes: 0aa0838c84da ("fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers") Signed-off-by: Michael Kelley Reviewed-by: Thomas Zimmermann Reviewed-by: Saurabh Sengar Link: https://lore.kernel.org/r/20240201060022.233666-1-mhklinux@outlook.com Signed-off-by: Wei Liu Message-ID: <20240201060022.233666-1-mhklinux@outlook.com>

fbcon: always restore the old font data in fbcon_do_set_font()

2024-02-26T15:47:02Z

Commit a5a923038d70 (fbdev: fbcon: Properly revert changes when vc_resize() failed) started restoring old font data upon failure (of vc_resize()). But it performs so only for user fonts. It means that the "system"/internal fonts are not restored at all. So in result, the very first call to fbcon_do_set_font() performs no restore at all upon failing vc_resize(). This can be reproduced by Syzkaller to crash the system on the next invocation of font_get(). It's rather hard to hit the allocation failure in vc_resize() on the first font_set(), but not impossible. Esp. if fault injection is used to aid the execution/failure. It was demonstrated by Sirius: BUG: unable to handle page fault for address: fffffffffffffff8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286 Call Trace: con_font_get drivers/tty/vt/vt.c:4558 [inline] con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673 vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline] vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752 tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803 vfs_ioctl fs/ioctl.c:51 [inline] ... So restore the font data in any case, not only for user fonts. Note the later 'if' is now protected by 'old_userfont' and not 'old_data' as the latter is always set now. (And it is supposed to be non-NULL. Otherwise we would see the bug above again.) Signed-off-by: Jiri Slaby (SUSE) Fixes: a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") Reported-and-tested-by: Ubisectech Sirius Cc: Ubisectech Sirius Cc: Daniel Vetter Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20240208114411.14604-1-jirislaby@kernel.org

fbdev: stifb: Fix crash in stifb_blank()

2024-01-23T08:13:24Z

Avoid a kernel crash in stifb by providing the correct pointer to the fb_info struct. Prior to commit e2e0b838a184 ("video/sticore: Remove info field from STI struct") the fb_info struct was at the beginning of the fb struct. Fixes: e2e0b838a184 ("video/sticore: Remove info field from STI struct") Signed-off-by: Helge Deller Cc: Thomas Zimmermann

fbcon: Fix incorrect printed function name in fbcon_prepare_logo()

2024-01-22T21:41:15Z

If the boot logo does not fit, a message is printed, including a wrong function name prefix. Instead of correcting the function name (or using __func__), just use "fbcon", like is done in several other messages. While at it, modernize the call by switching to pr_info(). Signed-off-by: Geert Uytterhoeven Signed-off-by: Helge Deller

fbdev: sis: Error out if pixclock equals zero

2024-01-21T08:00:14Z

The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. In sisfb_check_var(), var->pixclock is used as a divisor to caculate drate before it is checked against zero. Fix this by checking it at the beginning. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. Signed-off-by: Fullway Wang Signed-off-by: Helge Deller

fbdev: savage: Error out if pixclock equals zero

2024-01-21T08:00:14Z

The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. Signed-off-by: Fullway Wang Signed-off-by: Helge Deller

fbdev: vt8500lcdfb: Remove unnecessary print function dev_err()

2024-01-21T07:49:56Z

The print function dev_err() is redundant because platform_get_irq() already prints an error. Reported-by: Abaci Robot Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7824 Signed-off-by: Jiapeng Chong Signed-off-by: Helge Deller

Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-01-19T01:29:01Z

Pull i2c updates from Wolfram Sang: "This removes the currently unused CLASS_DDC support (controllers set the flag, but there is no client to use it). Also, CLASS_SPD support gets simplified to prepare removal in the future. Class based instantiation is not recommended these days anyhow. Furthermore, I2C core now creates a debugfs directory per I2C adapter. Current bus driver users were converted to use it. Finally, quite some driver updates. Standing out are patches for the wmt-driver which is refactored to support more variants. This is the rebased pull request where a large series for the designware driver was dropped" * tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) MAINTAINERS: use proper email for my I2C work i2c: stm32f7: add support for stm32mp25 soc i2c: stm32f7: perform I2C_ISR read once at beginning of event isr dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: simplify status messages in case of errors i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: i801: Add lis3lv02d for Dell XPS 15 7590 i2c: i801: Add lis3lv02d for Dell Precision 3540 i2c: wmt: Reduce redundant: REG_CR setting i2c: wmt: Reduce redundant: function parameter i2c: wmt: Reduce redundant: clock mode setting i2c: wmt: Reduce redundant: wait event complete i2c: wmt: Reduce redundant: bus busy check i2c: mux: reg: Remove class-based device auto-detection support i2c: make i2c_bus_type const dt-bindings: at24: add ROHM BR24G04 eeprom: at24: use of_match_ptr() i2c: cpm: Remove linux,i2c-index conversion from be32 i2c: imx: Make SDA actually optional for bus recovering ...

fbdev: remove I2C_CLASS_DDC support

2024-01-18T20:10:41Z

After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC. Class-based device auto-detection is a legacy mechanism and shouldn't be used in new code. So we can remove this class completely now. Acked-by: Helge Deller Acked-by: Thomas Zimmermann Signed-off-by: Heiner Kallweit Signed-off-by: Wolfram Sang