Mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ https://git.shady.money/linux/atom?h=v3.13 2013-12-10T03:21:39Z 2013-12-10T03:21:39Z Linus Torvalds torvalds@linux-foundation.org 2013-12-10T03:21:39Z urn:sha1:17b2112f332db7c2bac56926c9e627807bce3615 Pull powerpc fixes from Ben Herrenschmidt: "Here are a handful of powerpc fixes for 3.13. The patches are reasonably trivial and self contained. Note the offb patches outside of arch/powerpc, they are LE fixes for our open-firmware 'dumb' framebuffer" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix up the kdump base cap to 128M powernv: Fix VFIO support with PHB3 powerpc/52xx: Re-enable bestcomm driver in defconfigs powerpc/pasemi: Turn on devtmpfs in defconfig offb: Add palette hack for little endian offb: Little endian fixes powerpc: Fix PTE page address mismatch in pgtable ctor/dtor powerpc/44x: Fix ocm_block allocation powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node 2013-12-10T00:25:07Z Cedric Le Goater clg@fr.ibm.com 2013-12-04T16:49:52Z urn:sha1:e1edf18b20076da83dd231dbd2146cbbc31c0b14 The pseudo palette color entries need to be ajusted for little endian. This patch byteswaps the values in the pseudo palette depending on the host endian order and the screen depth. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2013-12-10T00:25:06Z Cedric Le Goater clg@fr.ibm.com 2013-12-04T16:49:51Z urn:sha1:212c0cbd5be721a39ef3e2f723e0c78008f9e955 The "screen" properties : depth, width, height, linebytes need to be converted to the host endian order when read from the device tree. The offb_init_palette_hacks() routine also made assumption on the host endian order. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2013-12-04T08:50:16Z Dan Carpenter dan.carpenter@oracle.com 2013-12-02T08:11:18Z urn:sha1:46ac29568e63c9da9c15804648d3ed8c25e2dc44 We shouldn't kfree(fbi) because that was allocated with devm_kzalloc(). There were several error paths which returned directly instead of releasing resources. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2013-12-04T08:48:12Z Johan Hovold jhovold@gmail.com 2013-10-22T16:36:57Z urn:sha1:5a0973f33b4e6a10227b3d285ff2b0777730d298 Add missing module device table which is needed for module autoloading. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2013-11-26T14:59:42Z Geert Uytterhoeven geert@linux-m68k.org 2013-11-06T08:57:27Z urn:sha1:974dbcfcca1ee88279e274051e1719b4980ebdb3 If both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME are not set: drivers/video/sh_mobile_meram.c:573: warning: ‘sh_mobile_meram_suspend’ defined but not used drivers/video/sh_mobile_meram.c:597: warning: ‘sh_mobile_meram_resume’ defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2013-11-26T14:40:14Z Sasha Levin sasha.levin@oracle.com 2013-11-19T19:25:36Z urn:sha1:2ab68ec927310dc488f3403bb48f9e4ad00a9491 kyro would copy u32s and specify sizeof(unsigned long) as the size to copy. This would copy more data than intended and cause memory corruption and might leak kernel memory. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2013-11-26T10:49:17Z Aaro Koskinen aaro.koskinen@iki.fi 2013-11-11T18:41:38Z urn:sha1:c37dd677988ca50bc8bc60ab5ab053720583c168 When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig (LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled, the following BUG is seen during the boot: [ 7.302154] ===================================== [ 7.307128] [ BUG: bad unlock balance detected! ] [ 7.312103] 3.12.0-los.git-2093492-00120-g5e01dc7 #3 Not tainted [ 7.318450] ------------------------------------- [ 7.323425] kworker/u2:1/12 is trying to release lock (&ddata->mutex) at: [ 7.330657] [<c031b760>] acx565akm_enable+0x12c/0x18c [ 7.335998] but there are no more locks to release! Fix by removing double unlock and handling the locking completely inside acx565akm_panel_power_on() when doing the power on. Reported-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2013-11-16T20:45:55Z Linus Torvalds torvalds@linux-foundation.org 2013-11-16T20:45:55Z urn:sha1:71f777ed50e9109c235c14604d5e23d2f8e7453c Pull ARM SoC fixes from Olof Johansson: "A first set of batches of fixes for 3.13. The diffstat is large mostly because we're adding a defconfig for a family that's been lacking it, and there's some missing clock information added for i.MX and OMAP. The at91 new code is around dealing with RTC/RTT reset at boot to fix possible hangs due to pending wakeup interrupts coming in during early boot" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: OMAP2+: Fix build for dra7xx without omap4 and 5 ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume doc: devicetree: Add bindings documentation for omap-des driver ARM: dts: doc: Document missing compatible property for omap-sham driver ARM: OMAP3: Beagle: fix return value check in beagle_opp_init() ARM: at91: fix hanged boot due to early rtt-interrupt ARM: at91: fix hanged boot due to early rtc-interrupt video: exynos_mipi_dsim: Remove unused variable ARM: highbank: only select errata 764369 if SMP ARM: sti: only select errata 764369 if SMP ARM: tegra: init fuse before setting reset handler ARM: vt8500: add defconfig for v6/v7 chips ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD ARM: OMAP: devicetree: fix SPI node compatible property syntax items pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() MAINTAINERS: drop discontinued mailing list ARM: dts: i.MX51: Fix OTG PHY clock ARM: imx: set up pllv3 POWER and BYPASS sequentially ARM: imx: pllv3 needs relock in .set_rate() call ... 2013-11-16T20:21:40Z Linus Torvalds torvalds@linux-foundation.org 2013-11-16T20:21:40Z urn:sha1:0bde7294e2ada03d0f1cc61cec51274081d9a9cf Pull pwm changes from Thierry Reding: "Mostly bug fixes and clean up. There is a new driver, which is actually moving a custom PWM driver from drivers/misc. The majority of the patches are enhancements to the device tree support in the pwm-backlight driver. Backlights can now additionally be powered using a regulator and enabled using a GPIO in addition to just the PWM input" * tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits) Documentation/pwm: Update supported SoC name for pwm-samsung pwm: samsung: Fix kernel warning while unexporting a channel MAINTAINERS: Move PWM subsystem tree to kernel.org Documentation/pwm: Fix trivial typos pwm-backlight: Remove unused variable pwm_backlight: avoid short blank screen while doing hibernation pwm-backlight: Fix brightness adjustment pwm: add ep93xx PWM support pwm-backlight: Allow for non-increasing brightness levels pwm-backlight: Add power supply support pwm-backlight: Use new enable_gpio field unicore32: Initialize PWM backlight enable_gpio field ARM: shmobile: Initialize PWM backlight enable_gpio field ARM: SAMSUNG: Initialize PWM backlight enable_gpio field ARM: pxa: Initialize PWM backlight enable_gpio field ARM: OMAP: Initialize PWM backlight enable_gpio field pwm-backlight: Add optional enable GPIO pwm-backlight: Track enable state pwm-backlight: Refactor backlight power on/off pwm-backlight: Improve readability ...