Mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ https://git.shady.money/linux/atom?h=v4.0 2015-02-26T08:23:15Z 2015-02-26T08:23:15Z Tomi Valkeinen tomi.valkeinen@ti.com 2015-02-25T08:23:58Z urn:sha1:a38bb793eaebe1178fbd8ef6ab66ccc062bad505 omapdss's sysfs directories for displays used to have 'name' file, giving the name for the display. This file was later renamed to 'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like at least xserver-xorg-video-omap3 requires the 'name' file to be present. To fix the regression, this patch creates new kobjects for each display, allowing us to create sysfs directories for the displays. This way we have the whole directory for omapdss, and there will be no sysfs file clashes with the underlying display device's sysfs files. We can thus add the 'name' sysfs file back. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NeilBrown <neilb@suse.de> 2015-02-26T08:23:15Z Sudip Mukherjee sudipm.mukherjee@gmail.com 2015-02-12T15:47:36Z urn:sha1:d746b40c64619f5064ebbe545938062481ef5183 we were dereferencing edid first and the NULL check was after accessing that. now we are using edid only if we know that it is not NULL. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2015-02-26T08:23:15Z Kiran Padwal kiran.padwal@smartplayin.com 2015-02-11T09:36:45Z urn:sha1:11f09e53af05822d8c481edc70c08d925d8ef7dd This patch add a missing check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2015-02-12T01:06:05Z Andrea Arcangeli aarcange@redhat.com 2015-02-11T23:27:26Z urn:sha1:7e339128496284cc21977fba5416166ee81f5172 This allows those get_user_pages calls to pass FAULT_FLAG_ALLOW_RETRY to the page fault in order to release the mmap_sem during the I/O. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 2015-02-11T17:24:30Z Linus Torvalds torvalds@linux-foundation.org 2015-02-11T17:24:30Z urn:sha1:e0c8453769fcaec654cd5870e84c63175658c842 Pull fbdev changes from Tomi Valkeinen: - omapdss: add DRA7xxx SoC support - fbdev: support DMT (Display Monitor Timing) calculation * tag 'fbdev-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (40 commits) omapfb: Return error code when applying overlay settings fails OMAPDSS: DPI: DRA7xx support OMAPDSS: HDMI: Add DRA7xx support OMAPDSS: DISPC: program dispc polarities to control module OMAPDSS: DISPC: Add DRA7xx support OMAPDSS: Add Video PLLs for DRA7xx OMAPDSS: Add functions for external control of PLL OMAPDSS: DSS: Add DRA7xx base support Doc/DT: Add DT binding doc for DRA7xx DSS OMAPDSS: add define for DRA7xx HW version OMAPDSS: encoder-tpd12s015: Fix race issue with LS_OE OMAPDSS: OMAP5: fix digit output's allowed mgrs OMAPDSS: constify port arrays OMAPDSS: PLL: add dss_pll_wait_reset_done() OMAPDSS: Add enum dss_pll_id video: fbdev: fix sys_copyarea video/mmpfb: allow modular build fb: via: turn gpiolib and i2c selects into dependencies fbdev: ssd1307fb: return proper error code if write command fails fbdev: fix CVT vertical front and back porch values ... 2015-02-11T16:45:40Z Linus Torvalds torvalds@linux-foundation.org 2015-02-11T16:45:40Z urn:sha1:3e63430a5cc26bc90a6e33ab33f901196b7b63ac Pull media updates from Mauro Carvalho Chehab: - Some documentation updates and a few new pixel formats - Stop btcx-risc abuse by cx88 and move it to bt8xx driver - New platform driver: am437x - New webcam driver: toptek - New remote controller hardware protocols added to img-ir driver - Removal of a few very old drivers that relies on old kABIs and are for very hard to find hardware: parallel port webcam drivers (bw-qcam, c-cam, pms and w9966), tlg2300, Video In/Out for SGI (vino) - Removal of the USB Telegent driver (tlg2300). The company that developed this driver has long gone and the hardware is hard to find. As it relies on a legacy set of kABI symbols and nobody seems to care about it, remove it. - several improvements at rtl2832 driver - conversion on cx28521 and au0828 to use videobuf2 (VB2) - several improvements, fixups and board additions * tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits) [media] dvb_net: Convert local hex dump to print_hex_dump_debug [media] dvb_net: Use standard debugging facilities [media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses [media] staging: lirc_serial: adjust boolean assignments [media] stb0899: use sign_extend32() for sign extension [media] si2168: add support for 1.7MHz bandwidth [media] si2168: return error if set_frontend is called with invalid parameters [media] lirc_dev: avoid potential null-dereference [media] mn88472: simplify bandwidth registers setting code [media] dvb: tc90522: re-add symbol-rate report [media] lmedm04: add read snr, signal strength and ber call backs [media] lmedm04: Create frontend call back for read status [media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb [media] lmedm04: Increase Interupt due time to 200 msec [media] cx88-dvb: whitespace cleanup [media] rtl28xxu: properly initialize pdata [media] rtl2832: declare functions as static [media] rtl2830: declare functions as static [media] rtl2832_sdr: add kernel-doc comments for platform_data ... 2015-02-10T21:27:24Z Linus Torvalds torvalds@linux-foundation.org 2015-02-10T21:27:24Z urn:sha1:ab0475df5ce45d80a9e5f056cbad3a58e4930206 Pull m68k updates from Geert Uytterhoeven: "Summary: - switch to asm-generic/futex.h - various cleanups - defconfig updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Enable Ethernet bridging m68k/defconfig: Enable Atari EtherNAT and EtherNEC Ethernet support m68k/defconfig: Enable automounting of devtmpfs at /dev m68k/defconfig: Enable early printk support m68k/defconfig: Enable test modules m68k/defconfig: Refresh defconfigs for v3.16-rc1--v3.19-rc2 m68k/atari: Remove obsolete IRQ_TYPE_* sound: dmasound_atari: Remove obsolete IRQ_TYPE_SLOW video: atafb: Remove obsolete IRQ_TYPE_PRIO parport: parport_atari: Remove obsolete IRQ_TYPE_SLOW net: atarilance: Remove obsolete IRQ_TYPE_PRIO m68k/atari: Remove obsolete keyboard_tasklet scheduling m68k/mac: Fix scsi_type for Mac LC and similar models m68k: Switch to asm-generic/futex.h m68k/mvme147: config.c - Remove unused functions m68k/atari: atakeyb.c - Remove some unused functions m68k/mvme16x: rtc - Don't use module_init in non-modular code 2015-02-04T10:44:11Z Tomi Valkeinen tomi.valkeinen@ti.com 2015-02-04T10:44:11Z urn:sha1:d6c2152b3efd73be265f426b5a1bb50ec436d999 Merge fbdev topic branches 2015-02-04T10:41:53Z Peter Meerwald pmeerw@pmeerw.net 2015-01-30T07:59:46Z urn:sha1:811fbb1f580ca024a0af603dfaef08a4d1dcb5ef the check of the return code is missing, user space does not get notified about the error condition: omapdss OVERLAY error: overlay 2 horizontally not inside the display area (403 + 800 >= 800) omapdss APPLY error: failed to apply settings: illegal configuration. Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2015-02-04T10:32:07Z Tomi Valkeinen tomi.valkeinen@ti.com 2014-12-31T09:26:06Z urn:sha1:a2408154a14b5633b1f233e4b5fea85c09917eef Add support for DRA7xx DPI output. DRA7xx has three DPI outputs, each of which gets its input from a DISPC channel. However, DRA72x has only one video PLL, and DRA74x has two video PLLs. In both cases the video PLLs need to be shared between multiple outputs. The driver doesn't handle this at the moment. Also, DRA7xx requires configuring CONTROL module bits to route the clock from the PLL to the used DISPC channel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>