linux/drivers, branch v4.2

thermal: power_allocator: allocate with kcalloc what you free with kfree

2015-08-29T17:10:47Z

Commit cf736ea6f902 ("thermal: power_allocator: do not use devm* interfaces") forgot to change a devm_kcalloc() to just kcalloc(), but it's corresponding devm_kfree() was changed to kfree(). Allocate with kcalloc() to match the kfree(). Fixes: cf736ea6f902 ("thermal: power_allocator: do not use devm* interfaces") Cc: Dmitry Torokhov Cc: Eduardo Valentin Cc: Zhang Rui Signed-off-by: Javi Merino Signed-off-by: Linus Torvalds

Merge branch 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2015-08-28T19:02:51Z

Pull libata fixlet from Tejun Heo: "Simple blacklist entry addition" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: Add factory recertified Crucial M500s to blacklist

Merge tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2015-08-28T00:59:17Z

Pull powerpc fixes from Michael Ellerman: "Fix MSI/MSI-X on pseries from Guilherme" * tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF case PCI: Make pci_msi_setup_pci_dev() non-static for use by arch code

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-08-28T00:52:38Z

Pull networking fixes from David Miller: "Some straggler bug fixes here: 1) Netlink_sendmsg() doesn't check iterator type properly in mmap case, from Ken-ichirou MATSUZAWA. 2) Don't sleep in atomic context in bcmgenet driver, from Florian Fainelli. 3) The pfkey_broadcast() code patch can't actually ever use anything other than GFP_ATOMIC. And the cases that right now pass GFP_KERNEL or similar will currently trigger an RCU splat. Just use GFP_ATOMIC unconditionally. From David Ahern. 4) Fix FD bit timings handling in pcan_usb driver, from Marc Kleine-Budde. 5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang. 6) Traversal into drivers/net/ethernet/renesas should be triggered by CONFIG_NET_VENDOR_RENESAS, not a particular driver's config option. From Kazuya Mizuguchi. 7) Fix regression in handling of igmp_join errors in vxlan, from Marcelo Ricardo Leitner. 8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock mutex when programming the registers. From Russell King. 9) Fix non-forced handling in u32_destroy(), from WANG Cong. 10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in usbnet_stop(), from Eugene Shatokhin. 11) In sfc driver, don't fetch statistics firmware isn't capable of, from Bert Kenward. 12) Verify ASCONF address parameter location in SCTP, from Xin Long" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state sctp: asconf's process should verify address parameter is in the beginning sfc: only use vadaptor stats if firmware is capable net: phy: fixed: propagate fixed link values to struct usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared drivers: net: xgene: fix: Oops in linkwatch_fire_event cls_u32: complete the check for non-forced case in u32_destroy() net: fec: use reinit_completion() in mdio accessor functions net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect() vxlan: re-ignore EADDRINUSE from igmp_join net: compile renesas directory if NET_VENDOR_RENESAS is configured ip6_gre: release cached dst on tunnel removal phylib: Make PHYs children of their MDIO bus, not the bus' parent. can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters net: Fix RCU splat in af_key net: bcmgenet: fix uncleaned dma flags net: bcmgenet: Avoid sleeping in bcmgenet_timeout netlink: mmap: fix tx type check

Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2015-08-28T00:46:06Z

Pull nvdimm fixlet from Dan Williams: "This is a libnvdimm ABI fixup. I pushed back on this change quite hard given the late date, that it appears to be purely cosmetic, sysfs is not necessarily meant to be a user friendly UI, and the kernel interprets the reversed polarity of the ACPI_NFIT_MEM_ARMED flag correctly. When this flag is set, the energy source of an NVDIMM is not armed and any new writes to the DIMM may not be preserved. However, Bob Moore warned me that it is important to get these things named correctly wherever they appear otherwise we run the risk of a less than cautious firmware engineer implementing the polarity the wrong way. Once a mistake like that escapes into production platforms the flag becomes useless and we need to move to a new bit position. Bob has agreed to take a change through ACPICA to rename ACPI_NFIT_MEM_ARMED to ACPI_NFIT_MEM_NOT_ARMED, and the patch below from Toshi brings the sysfs representation of these flags in line with their respective polarities. Please pull for 4.2 as this is the first kernel to expose the ACPI NFIT sysfs representation, and this is likely a kernel that firmware developers will be using for checking out their NVDIMM enabling" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: Clarify memory device state flags strings

nfit: Clarify memory device state flags strings

2015-08-27T18:35:58Z

ACPI 6.0 NFIT Memory Device State Flags in Table 5-129 defines NVDIMM status as follows. These bits indicate multiple info, such as failures, pending event, and capability. Bit [0] set to 1 to indicate that the previous SAVE to the Memory Device failed. Bit [1] set to 1 to indicate that the last RESTORE from the Memory Device failed. Bit [2] set to 1 to indicate that platform flush of data to Memory Device failed. As a result, the restored data content may be inconsistent even if SAVE and RESTORE do not indicate failure. Bit [3] set to 1 to indicate that the Memory Device is observed to be not armed prior to OSPM hand off. A Memory Device is considered armed if it is able to accept persistent writes. Bit [4] set to 1 to indicate that the Memory Device observed SMART and health events prior to OSPM handoff. /sys/bus/nd/devices/nmemX/nfit/flags shows this flags info. The output strings associated with the bits are "save", "restore", "smart", etc., which can be confusing as they may be interpreted as positive status, i.e. save succeeded. Change also the dev_info() message in acpi_nfit_register_dimms() to be consistent with the sysfs flags strings. Reported-by: Robert Elliott Signed-off-by: Toshi Kani [ross: rename 'not_arm' to 'not_armed'] Cc: Ross Zwisler [djbw: defer adding bit5, HEALTH_ENABLED, for now] Signed-off-by: Dan Williams

sfc: only use vadaptor stats if firmware is capable

2015-08-27T18:27:01Z

Some of the stats handling code differs based on SR-IOV support, and SRIOV support is only available if full-featured firmware is used. Do not use vadaptor stats if firmware mode is not set to full-featured. Signed-off-by: Shradha Shah Signed-off-by: David S. Miller

net: phy: fixed: propagate fixed link values to struct

2015-08-27T18:24:49Z

The fixed link values parsed from the device tree are stored in the struct fixed_phy member status. The struct phy_device members speed, duplex were not updated. Signed-off-by: Madalin Bucur Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

2015-08-26T18:08:47Z

Pull block fixes from Jens Axboe: "Two fixes in this pull request: - The writeback regression fix from Tejun, which has been weeks in the making. This fixes a case where we would sometimes not issue writeback when we should have. - An older fix for a memory corruption issue in mtip32xx. It was deferred since we wanted a better fix for this (driver should not have to handle that case), but given the timing, it's better to put the simple fix in for 4.2 release" * 'for-linus' of git://git.kernel.dk/linux-block: mtip32x: fix regression introduced by blk-mq per-hctx flush writeback: sync_inodes_sb() must write out I_DIRTY_TIME inodes and always call wait_sb_inodes()

Add factory recertified Crucial M500s to blacklist

2015-08-26T15:30:47Z

The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by: Guillermo A. Amaral Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org