linux/drivers, branch v5.3

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2019-09-14T23:02:49Z

Pull virtio fix from Michael Tsirkin: "A last minute revert The 32-bit build got broken by the latest defence in depth patch. Revert and we'll try again in the next cycle" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: Revert "vhost: block speculation of translated descriptors"

Revert "vhost: block speculation of translated descriptors"

2019-09-14T19:21:51Z

This reverts commit a89db445fbd7f1f8457b03759aa7343fa530ef6b. I was hasty to include this patch, and it breaks the build on 32 bit. Defence in depth is good but let's do it properly. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-09-14T19:20:38Z

Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ...

Merge tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2019-09-14T19:08:19Z

Pull MMC fixes from Ulf Hansson: - tmio: Fixup runtime PM management during probe and remove - sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC - bcm2835: Prevent lockups when terminating work * tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: Fixup runtime PM management during remove mmc: tmio: Fixup runtime PM management during probe Revert "mmc: tmio: move runtime PM enablement to the driver implementations" Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller" Revert "mmc: bcm2835: Terminate timeout work synchronously"

Merge tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm

2019-09-14T18:54:57Z

Pull drm fixes from Dave Airlie: "From the maintainer summit, just some last minute fixes for final: lima: - fix gem_wait ioctl core: - constify modes list i915: - DP MST high color depth regression - GPU hangs on vulkan compute workloads" * tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm: drm/lima: fix lima_gem_wait() return value drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+ drm/i915: Limit MST to <= 8bpc once again drm/modes: Make the whitelist more const

cdc_ether: fix rndis support for Mediatek based smartphones

2019-09-13T20:08:13Z

A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with [ 355.960428] usb 1-4: bad CDC descriptors The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities. No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions. Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone. Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are: 0e8d:000a Mediatek Crosscall Spider X5 3G Phone CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x0f connection notifications sends break line coding and serial state get/set/clear comm features CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 and 19d2:1023 ZTE K4201-z CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares. Suggested-by: Lars Melin Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

ixgbevf: Fix secpath usage for IPsec Tx offload

2019-09-13T13:52:10Z

Port the same fix for ixgbe to ixgbevf. The ixgbevf driver currently does IPsec Tx offloading based on an existing secpath. However, the secpath can also come from the Rx side, in this case it is misinterpreted for Tx offload and the packets are dropped with a "bad sa_idx" error. Fix this by using the xfrm_offload() function to test for Tx offload. CC: Shannon Nelson Fixes: 7f68d4306701 ("ixgbevf: enable VF IPsec offload operations") Reported-by: Jonathan Tooker Signed-off-by: Jeff Kirsher Acked-by: Shannon Nelson Signed-off-by: David S. Miller

mmc: tmio: Fixup runtime PM management during remove

2019-09-13T11:49:09Z

Accessing the device when it may be runtime suspended is a bug, which is the case in tmio_mmc_host_remove(). Let's fix the behaviour. Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Tested-by: Geert Uytterhoeven

mmc: tmio: Fixup runtime PM management during probe

2019-09-13T11:49:04Z

The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the runtime PM status of the device, as to make it reflect the current status of the HW. This works fine for most cases, but unfortunate not for all. Especially, there is a generic problem when the device has a genpd attached and that genpd have the ->start|stop() callbacks assigned. More precisely, if the driver calls pm_runtime_set_active() during ->probe(), genpd does not get to invoke the ->start() callback for it, which means the HW isn't really fully powered on. Furthermore, in the next phase, when the device becomes runtime suspended, genpd will invoke the ->stop() callback for it, potentially leading to usage count imbalance problems, depending on what's implemented behind the callbacks of course. To fix this problem, convert to call pm_runtime_get_sync() from tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to avoid bumping usage counters and unnecessary re-initializing the HW the first time the tmio driver's ->runtime_resume() callback is called, introduce a state flag to keeping track of this. Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Tested-by: Geert Uytterhoeven

Revert "mmc: tmio: move runtime PM enablement to the driver implementations"

2019-09-13T11:48:35Z

This reverts commit 7ff213193310ef8d0ee5f04f79d791210787ac2c. It turns out that the above commit introduces other problems. For example, calling pm_runtime_set_active() must not be done prior calling pm_runtime_enable() as that makes it fail. This leads to additional problems, such as clock enables being wrongly balanced. Rather than fixing the problem on top, let's start over by doing a revert. Fixes: 7ff213193310 ("mmc: tmio: move runtime PM enablement to the driver implementations") Signed-off-by: Ulf Hansson Tested-by: Geert Uytterhoeven