linux/drivers, branch v5.4

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2019-11-23T21:02:18Z

Pull last minute virtio bugfixes from Michael Tsirkin: "Minor bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: fix shrinker count virtio_balloon: fix shrinker scan number of pages virtio_console: allocate inbufs in add_port() only if it is needed virtio_ring: fix return code on DMA mapping fails

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2019-11-23T00:57:26Z

Pull input fix from Dmitry Torokhov: "Just a single revert as RMI mode should not have been enabled for this model [yet?]" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"

Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"

2019-11-22T23:19:03Z

This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d. Ugh, I really dropped the ball on this one :\. So as it turns out RMI4 works perfectly fine on the X1 Extreme Gen 2 except for one thing I didn't notice because I usually use the trackpoint: clicking with the touchpad. Somehow this is broken, in fact we don't even seem to indicate BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even see any RMI4 events coming from the touchpad when I press down on it. This only seems to work for PS/2 mode. Since that means we have a regression, and PS/2 mode seems to work fine for the time being - revert this for now. We'll have to do a more thorough investigation on this. Signed-off-by: Lyude Paul Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-11-22T22:28:14Z

Pull networking fixes from David Miller: 1) Validate tunnel options length in act_tunnel_key, from Xin Long. 2) Fix DMA sync bug in gve driver, from Adi Suresh. 3) TSO kills performance on some r8169 chips due to HW issues, disable by default in that case, from Corinna Vinschen. 4) Fix clock disable mismatch in fec driver, from Chubong Yuan. 5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan. 6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann. 7) Don't napi_disable() twice in r8152 driver, from Hayes Wang. 8) Fix SKB extension memory leak, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) r8152: avoid to call napi_disable twice MAINTAINERS: Add myself as maintainer of virtio-vsock udp: drop skb extensions before marking skb stateless net: rtnetlink: prevent underflows in do_setvfinfo() can: m_can_platform: remove unnecessary m_can_class_resume() call can: m_can_platform: set net_device structure as driver data hv_netvsc: Fix send_table offset in case of a host bug hv_netvsc: Fix offset usage in netvsc_send_table() net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN sfc: Only cancel the PPS workqueue if it exists nfc: port100: handle command failure cleanly net-sysfs: fix netdev_queue_add_kobject() breakage r8152: Re-order napi_disable in rtl8152_close net: qca_spi: Move reset_count to struct qcaspi net: qca_spi: fix receive buffer size check net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode Revert "net/ibmvnic: Fix EOI when running in XIVE mode" net/mlxfw: Verify FSM error code translation doesn't exceed array size net/mlx5: Update the list of the PCI supported devices net/mlx5: Fix auto group size calculation ...

r8152: avoid to call napi_disable twice

2019-11-22T18:07:44Z

Call napi_disable() twice would cause dead lock. There are three situations may result in the issue. 1. rtl8152_pre_reset() and set_carrier() are run at the same time. 2. Call rtl8152_set_tunable() after rtl8152_close(). 3. Call rtl8152_set_ringparam() after rtl8152_close(). For #1, use the same solution as commit 84811412464d ("r8152: Re-order napi_disable in rtl8152_close"). For #2 and #3, add checking the flag of IFF_UP and using napi_disable/napi_enable during mutex. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller

Merge tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm

2019-11-22T17:14:30Z

Pull drm fixes from Dave Airlie: "Two sets of fixes in here, one for amdgpu, and one for i915. The amdgpu ones are pretty small, i915's CI system seems to have a few problems in the last week or so, there is one major regression fix for fb_mmap, but there are a bunch of other issues fixed in there as well, oops, screen flashes and rcu related. amdgpu: - Remove experimental flag for navi14 - Fix confusing power message failures on older VI parts - Hang fix for gfxoff when using the read register interface - Two stability regression fixes for Raven i915: - Fix kernel oops on dumb_create ioctl on no crtc situation - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update - Fix unity of the frequencies reported on PMU - Fix kernel oops on set_page_dirty using better locks around it - Protect the request pointer with RCU to prevent it being freed while we might need still - Make pool objects read-only - Restore physical addresses for fb_map to avoid corrupted page table" * tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm: drm/i915/fbdev: Restore physical addresses for fb_mmap() Revert "drm/amd/display: enable S/G for RAVEN chip" drm/amdgpu: disable gfxoff on original raven drm/amdgpu: disable gfxoff when using register read interface drm/amd/powerplay: correct fine grained dpm force level setting drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs drm/amdgpu: remove experimental flag for Navi14 drm/i915: make pool objects read-only drm/i915: Protect request peeking with RCU drm/i915/userptr: Try to acquire the page lock around set_page_dirty() drm/i915/pmu: "Frequency" is reported as accumulated cycles drm/i915: Preload LUTs if the hw isn't currently using them drm/i915: Don't oops in dumb_create ioctl if we have no crtcs

can: m_can_platform: remove unnecessary m_can_class_resume() call

2019-11-22T14:34:37Z

The function m_can_runtime_resume() is getting recursively called from m_can_class_resume(). This results in a lock up. We need not call m_can_class_resume() during m_can_runtime_resume(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma Signed-off-by: Sriram Dash Acked-by: Dan Murphy Signed-off-by: Marc Kleine-Budde

can: m_can_platform: set net_device structure as driver data

2019-11-22T14:32:32Z

The current code is failing during clock prepare enable because of not getting proper clock from platform device. [ 0.852089] Call trace: [ 0.854516] 0xffff0000fa22a668 [ 0.857638] clk_prepare+0x20/0x34 [ 0.861019] m_can_runtime_resume+0x2c/0xe4 [ 0.865180] pm_generic_runtime_resume+0x28/0x38 [ 0.869770] __rpm_callback+0x16c/0x1bc [ 0.873583] rpm_callback+0x24/0x78 [ 0.877050] rpm_resume+0x428/0x560 [ 0.880517] __pm_runtime_resume+0x7c/0xa8 [ 0.884593] m_can_clk_start.isra.9.part.10+0x1c/0xa8 [ 0.889618] m_can_class_register+0x138/0x370 [ 0.893950] m_can_plat_probe+0x120/0x170 [ 0.897939] platform_drv_probe+0x4c/0xa0 [ 0.901924] really_probe+0xd8/0x31c [ 0.905477] driver_probe_device+0x58/0xe8 [ 0.909551] device_driver_attach+0x68/0x70 [ 0.913711] __driver_attach+0x9c/0xf8 [ 0.917437] bus_for_each_dev+0x50/0xa0 [ 0.921251] driver_attach+0x20/0x28 [ 0.924804] bus_add_driver+0x148/0x1fc [ 0.928617] driver_register+0x6c/0x124 [ 0.932431] __platform_driver_register+0x48/0x50 [ 0.937113] m_can_plat_driver_init+0x18/0x20 [ 0.941446] do_one_initcall+0x4c/0x19c [ 0.945259] kernel_init_freeable+0x1d0/0x280 [ 0.949591] kernel_init+0x10/0x100 [ 0.953057] ret_from_fork+0x10/0x18 [ 0.956614] Code: 00000000 00000000 00000000 00000000 (fa22a668) [ 0.962681] ---[ end trace 881f71bd609de763 ]--- [ 0.967301] Kernel panic - not syncing: Attempted to kill init! A device driver for CAN controller hardware registers itself with the Linux network layer as a network device. So, the driver data for m_can should ideally be of type net_device. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma Signed-off-by: Sriram Dash Acked-by: Dan Murphy Signed-off-by: Marc Kleine-Budde

hv_netvsc: Fix send_table offset in case of a host bug

2019-11-22T03:32:23Z

If negotiated NVSP version <= NVSP_PROTOCOL_VERSION_6, the offset may be wrong (too small) due to a host bug. This can cause missing the end of the send indirection table, and add multiple zero entries from leading zeros before the data region. This bug adds extra burden on channel 0. So fix the offset by computing it from the data structure sizes. This will ensure netvsc driver runs normally on unfixed hosts, and future fixed hosts. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Fix offset usage in netvsc_send_table()

2019-11-22T03:32:23Z

To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller