linux/drivers, branch v6.8

Merge tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2024-03-10T18:39:48Z

Pull phy fixes from Vinod Koul: - fixes for Qualcomm qmp-combo driver for ordering of drm and type-c switch registartion due to drivers might not probe defer after having registered child devices to avoid triggering a probe deferral loop. This fixes internal display on Lenovo ThinkPad X13s * tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: qcom-qmp-combo: fix type-c switch registration phy: qcom-qmp-combo: fix drm bridge registration

Merge tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-03-09T18:32:03Z

Pull i2c fixes from Wolfram Sang: "Two patches from Heiner for the i801 are targeting muxes discovered while working on some other features. Essentially, there is a reordering when adding optional slaves and proper cleanup upon registering a mux device. Christophe fixes the exit path in the wmt driver that was leaving the clocks hanging, and the last fix from Tommy avoids false error reports in IRQ" * tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: aspeed: Fix the dummy irq expected print i2c: wmt: Fix an error handling path in wmt_i2c_probe() i2c: i801: Avoid potential double call to gpiod_remove_lookup_table i2c: i801: Fix using mux_pdev before it's set

Merge tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

2024-03-09T18:25:14Z

Pull firewire fix from Takashi Sakamoto: "A fix to suppress a warning about unreleased IRQ for 1394 OHCI hardware when disabling MSI. In Linux kernel v6.5, a PCI driver for 1394 OHCI hardware was optimized into the managed device resources. Edmund Raile points out that the change brings the warning about unreleased IRQ at the call of pci_disable_msi(), since the API expects that the relevant IRQ has already been released in advance. As long as the API is called in .remove callback of PCI device operation, it is prohibited to maintain the IRQ as the part of managed device resource. As a workaround, the IRQ is explicitly released at .remove callback, before the call of pci_disable_msi(). pci_disable_msi() is legacy API nowadays in PCI MSI implementation. I have a plan to replace it with the modern API in the development for the future version of Linux kernel. So at present I keep them as is" * tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: prevent leak of left-over IRQ on unbind

Merge tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-03-08T21:39:28Z

Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc and other driver subsystem fixes for reported issues that have been in my tree. Included in here are fixes for: - iio driver fixes for reported problems - much reported bugfix for a lis3lv02d_i2c regression - comedi driver bugfix - mei new device ids - mei driver fixes - counter core fix All of these have been in linux-next with no reported issues, some for many weeks" * tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: gsc_proxy: match component when GSC is on different bus misc: fastrpc: Pass proper arguments to scm call comedi: comedi_test: Prevent timers rescheduling during deletion comedi: comedi_8255: Correct error in subdevice initialization misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume iio: accel: adxl367: fix I2C FIFO data register iio: accel: adxl367: fix DEVID read after reset iio: pressure: dlhl60d: Initialize empty DLH bytes iio: imu: inv_mpu6050: fix frequency setting when chip is off iio: pressure: Fixes BMP38x and BMP390 SPI support iio: imu: inv_mpu6050: fix FIFO parsing when empty mei: Add Meteor Lake support for IVSC device mei: me: add arrow lake point H DID mei: me: add arrow lake point S DID counter: fix privdata alignment

Merge tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-03-08T21:33:04Z

Pull tty / serial fixes from Greg KH: "Here are some small remaining tty/serial driver fixes. Included in here is fixes for: - vt unicode buffer corruption fix - imx serial driver fixes, again - port suspend fix - 8250_dw driver fix - fsl_lpuart driver fix - revert for the qcom_geni_serial driver to fix a reported regression All of these have been in linux-next with no reported issues" * tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()" tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled vt: fix unicode buffer corruption when deleting characters serial: port: Don't suspend if the port is still busy serial: 8250_dw: Do not reclock if already at correct rate tty: serial: imx: Fix broken RS485

Merge tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-03-08T21:19:01Z

Pull USB / Thunderbolt fixes from Greg KH: "Here are some small remaining fixes for USB and Thunderbolt drivers. Included in here are fixes for: - thunderbold NULL dereference fix - typec driver fixes - xhci driver regression fix - usb-storage divide-by-0 fix - ncm gadget driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Fix failure to detect ring expansion need. usb: port: Don't try to peer unused USB ports based on location usb: gadget: ncm: Fix handling of zero block length packets usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()

Merge tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2024-03-08T21:13:20Z

Pull pin control fixes from Linus Walleij: - Fix the PM suspend callback in the STM32 ST32MP257 driver to properly support suspend - Drop an extraneous reference put in the debugfs code, this was confusing the reference counts and causing unsolicited calls to __free() * tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: don't put the reference to GPIO device in pinctrl_pins_show() pinctrl: stm32: fix PM support for stm32mp257

Merge tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2024-03-08T21:06:35Z

Pull input updates from Dmitry Torokhov: - a revert of endpoint checks in bcm5974 - the driver is being naughty and pokes at unclaimed USB interface, so the check fails. We need to fix the driver to claim both interfaces, and then re-implement the endpoints check - a fix to Synaptics RMI driver to avoid UAF on driver unload or device unbinding - a few new VID/PIDs added to xpad game controller driver - a change to gpio_keys_polled driver to quiet it when GPIO causes probe deferral. * tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removal Input: gpio_keys_polled - suppress deferred probe error for gpio Revert "Input: bcm5974 - check endpoint type before starting traffic" Input: xpad - add additional HyperX Controller Identifiers

Merge tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel

2024-03-08T20:44:56Z

Pull drm fixes from Dave Airlie: "Regular fixes (two weeks for i915), scattered across drivers, amdgpu and i915 being the main ones, with nouveau having a couple of fixes. One patch got applied for udl, but reverted soon after as the maintainer has missed some crucial prior discussion. Seems quiet and normal enough for this stage. MAINTAINERS - update email address core: - fix polling in certain configurations buddy: - fix kunit test warning panel: - boe-tv101wum-nl6: timing tuning fixes i915: - Fix to extract HDCP information from primary connector - Check for NULL mmu_interval_notifier before removing - Fix for #10184: Kernel crash on UHD Graphics 730 (Cc stable) - Fix for #10284: Boot delay regresion with PSR - Fix DP connector DSC HW state readout - Selftest fix to convert msecs to jiffies xe: - error path fix amdgpu: - SMU14 fix - Fix possible NULL pointer - VRR fix - pwm fix nouveau: - fix deadlock in new ioctls fail path - fix missing locking around object rbtree udl: - apply and revert format change" * tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel: (21 commits) nouveau: lock the client object tree. drm/tests/buddy: fix print format drm/xe: Return immediately on tile_init failure drm/amdgpu/pm: Fix the error of pwm1_enable setting drm/amd/display: handle range offsets in VRR ranges drm/amd/display: check dc_link before dereferencing drm/amd/swsmu: modify the gfx activity scaling Revert "drm/udl: Add ARGB8888 as a format" drm/i915/panelreplay: Move out psr_init_dpcd() from init_connector() drm/i915/dp: Fix connector DSC HW state readout drm/i915/selftests: Fix dependency of some timeouts on HZ drm/udl: Add ARGB8888 as a format drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf drm/i915: Don't explode when the dig port we don't have an AUX CH MAINTAINERS: Update email address for Tvrtko Ursulin drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP (again) drm: Fix output poll work for drm_kms_helper_poll=n drm/i915: Check before removing mm notifier drm/i915/hdcp: Extract hdcp structure from correct connector drm/i915/hdcp: Remove additional timing for reading mst hdcp message ...

i2c: aspeed: Fix the dummy irq expected print

2024-03-08T09:10:27Z

When the i2c error condition occurred and master state was not idle, the master irq function will goto complete state without any other interrupt handling. It would cause dummy irq expected print. Under this condition, assign the irq_status into irq_handle. For example, when the abnormal start / stop occurred (bit 5) with normal stop status (bit 4) at same time. Then the normal stop status would not be handled and it would cause irq expected print in the aspeed_i2c_bus_irq. ... aspeed-i2c-bus x. i2c-bus: irq handled != irq. Expected 0x00000030, but was 0x00000020 ... Fixes: 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events properly") Cc: Jae Hyun Yoo Signed-off-by: Tommy Huang Signed-off-by: Andi Shyti