linux/fs/exec.c, branch v4.9

mm: replace get_user_pages_remote() write/force parameters with gup_flags

2016-10-19T15:12:02Z

This removes the 'write' and 'force' from get_user_pages_remote() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes Acked-by: Michal Hocko Reviewed-by: Jan Kara Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

2016-08-04T22:04:44Z

Pull m68knommu updates from Greg Ungerer: "This series is all about Nicolas flat format support for MMU systems. Traditional m68k no-MMU flat format binaries can now be run on m68k MMU enabled systems too. The series includes some nice cleanups of the binfmt_flat code and converts it to using proper user space accessor functions. With all this in place you can boot and run a complete no-MMU flat format based user space on an MMU enabled system" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: enable binfmt_flat on systems with an MMU binfmt_flat: allow compressed flat binary format to work on MMU systems binfmt_flat: add MMU-specific support binfmt_flat: update libraries' data segment pointer with userspace accessors binfmt_flat: use clear_user() rather than memset() to clear .bss binfmt_flat: use proper user space accessors with old relocs code binfmt_flat: use proper user space accessors with relocs processing code binfmt_flat: clean up create_flat_tables() and stack accesses binfmt_flat: use generic transfer_args_to_stack() elf_fdpic_transfer_args_to_stack(): make it generic binfmt_flat: prevent kernel dammage from corrupted executable headers binfmt_flat: convert printk invocations to their modern form binfmt_flat: assorted cleanups m68k: use same start_thread() on MMU and no-MMU m68k: fix file path comment m68k: fix bFLT executable running on MMU enabled systems

firmware: support loading into a pre-allocated buffer

2016-08-02T23:35:10Z

Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. Let's add a request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. This skips the intermediate step of allocating a buffer in kernel memory to hold the firmware image while it's read from the filesystem. It also requires that drivers know how much memory they'll require before requesting the firmware and negates any benefits of firmware caching because the firmware layer doesn't manage the buffer lifetime. For a 16MB buffer, about half the time is spent performing a memcpy from the buffer to the final resting place. I see loading times go from 0.081171 seconds to 0.047696 seconds after applying this patch. Plus the vmalloc pressure is reduced. This is based on a patch from Vikram Mulukutla on codeaurora.org: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5 Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.org Signed-off-by: Stephen Boyd Cc: Mimi Zohar Cc: Vikram Mulukutla Cc: Mark Brown Cc: Ming Lei Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

elf_fdpic_transfer_args_to_stack(): make it generic

2016-07-25T06:51:49Z

This copying of arguments and environment is common to both NOMMU binary formats we support. Let's make the elf_fdpic version available to the flat format as well. While at it, improve the code a bit not to copy below the actual data area. Signed-off-by: Nicolas Pitre Reviewed-by: Greg Ungerer Signed-off-by: Greg Ungerer

fs: Treat foreign mounts as nosuid

2016-06-24T15:40:41Z

If a process gets access to a mount from a different user namespace, that process should not be able to take advantage of setuid files or selinux entrypoints from that filesystem. Prevent this by treating mounts from other mount namespaces and those not owned by current_user_ns() or an ancestor as nosuid. This will make it safer to allow more complex filesystems to be mounted in non-root user namespaces. This does not remove the need for MNT_LOCK_NOSUID. The setuid, setgid, and file capability bits can no longer be abused if code in a user namespace were to clear nosuid on an untrusted filesystem, but this patch, by itself, is insufficient to protect the system from abuse of files that, when execed, would increase MAC privilege. As a more concrete explanation, any task that can manipulate a vfsmount associated with a given user namespace already has capabilities in that namespace and all of its descendents. If they can cause a malicious setuid, setgid, or file-caps executable to appear in that mount, then that executable will only allow them to elevate privileges in exactly the set of namespaces in which they are already privileges. On the other hand, if they can cause a malicious executable to appear with a dangerous MAC label, running it could change the caller's security context in a way that should not have been possible, even inside the namespace in which the task is confined. As a hardening measure, this would have made CVE-2014-5207 much more difficult to exploit. Signed-off-by: Andy Lutomirski Signed-off-by: Seth Forshee Acked-by: James Morris Acked-by: Serge Hallyn Signed-off-by: Eric W. Biederman

exec: make exec path waiting for mmap_sem killable

2016-05-24T00:04:14Z

setup_arg_pages requires mmap_sem for write. If the waiting task gets killed by the oom killer it would block oom_reaper from asynchronous address space reclaim and reduce the chances of timely OOM resolving. Wait for the lock in the killable mode and return with EINTR if the task got killed while waiting. All the callers are already handling error path and the fatal signal doesn't need any additional treatment. The same applies to __bprm_mm_init. Signed-off-by: Michal Hocko Acked-by: Oleg Nesterov Acked-by: Vlastimil Babka Cc: Alexander Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

exec: remove the no longer needed remove_arg_zero()->free_arg_page()

2016-05-24T00:04:14Z

remove_arg_zero() does free_arg_page() for no reason. This was needed before and only if CONFIG_MMU=y: see commit 4fc75ff4816c ("exec: fix remove_arg_zero"), install_arg_page() was called for every page != NULL in bprm->page[] array. Today install_arg_page() has already gone and free_arg_page() is nop after another commit b6a2fea39318 ("mm: variable length argument support"). CONFIG_MMU=n does free_arg_pages() in free_bprm() and thus it doesn't need remove_arg_zero()->free_arg_page() too; apart from get_arg_page() it never checks if the page in bprm->page[] was allocated or not, so the "extra" non-freed page is fine. OTOH, this free_arg_page() can add the minor pessimization, the caller is going to do copy_strings_kernel() right after remove_arg_zero() which will likely need to re-allocate the same page again. And as Hujunjie pointed out, the "offset == PAGE_SIZE" check is wrong because we are going to increment bprm->p once again before return, so CONFIG_MMU=n "leaks" the page anyway if '0' is the final byte in this page. NOTE: remove_arg_zero() assumes that argv[0] is null-terminated but this is not necessarily true. copy_strings() does "len = strnlen_user(...)", then copy_from_user(len) but another thread or debuger can overwrite the trailing '0' in between. Afaics nothing really bad can happen because we must always have the null-terminated bprm->filename copied by the 1st copy_strings_kernel(), but perhaps we should change this code to check "bprm->p < bprm->exec" anyway, and/or change copy_strings() to ensure that the last byte in string is always zero. Link: http://lkml.kernel.org/r/20160517155335.GA31435@redhat.com Signed-off-by: Oleg Nesterov Reported by: hujunjie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

2016-05-19T16:21:36Z

Pull security subsystem updates from James Morris: "Highlights: - A new LSM, "LoadPin", from Kees Cook is added, which allows forcing of modules and firmware to be loaded from a specific device (this is from ChromeOS, where the device as a whole is verified cryptographically via dm-verity). This is disabled by default but can be configured to be enabled by default (don't do this if you don't know what you're doing). - Keys: allow authentication data to be stored in an asymmetric key. Lots of general fixes and updates. - SELinux: add restrictions for loading of kernel modules via finit_module(). Distinguish non-init user namespace capability checks. Apply execstack check on thread stacks" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (48 commits) LSM: LoadPin: provide enablement CONFIG Yama: use atomic allocations when reporting seccomp: Fix comment typo ima: add support for creating files using the mknodat syscall ima: fix ima_inode_post_setattr vfs: forbid write access when reading a file into memory fs: fix over-zealous use of "const" selinux: apply execstack check on thread stacks selinux: distinguish non-init user namespace capability checks LSM: LoadPin for kernel file loading restrictions fs: define a string representation of the kernel_read_file_id enumeration Yama: consolidate error reporting string_helpers: add kstrdup_quotable_file string_helpers: add kstrdup_quotable_cmdline string_helpers: add kstrdup_quotable selinux: check ss_initialized before revalidating an inode label selinux: delay inode label lookup as long as possible selinux: don't revalidate an inode's label when explicitly setting it selinux: Change bool variable name to index. KEYS: Add KEYCTL_DH_COMPUTE command ...

exec: clarify reasoning for euid/egid reset

2016-05-17T20:56:53Z

This section of code initially looks redundant, but is required. This improves the comment to explain more clearly why the reset is needed. Signed-off-by: Kees Cook Acked-by: Serge E. Hallyn Signed-off-by: Linus Torvalds

vfs: forbid write access when reading a file into memory

2016-05-01T13:23:51Z

This patch is based on top of the "vfs: support for a common kernel file loader" patch set. In general when the kernel is reading a file into memory it does not want anything else writing to it. The kernel currently only forbids write access to a file being executed. This patch extends this locking to files being read by the kernel. Changelog: - moved function to kernel_read_file() - Mimi - updated patch description - Mimi Signed-off-by: Dmitry Kasatkin Cc: Al Viro Signed-off-by: Mimi Zohar Reviewed-by: Luis R. Rodriguez Acked-by: Kees Cook