linux/fs/fs-writeback.c, branch v4.4

fs/writeback.c: fix kernel-doc warnings

2015-11-09T23:11:24Z

Fix kernel-doc warnings in fs/fs-writeback.c by moving a #define macro to after the function's opening brace. Also #undef this macro at the end of the function. ../fs/fs-writeback.c:1984: warning: Excess function parameter 'inode' description in 'I_DIRTY_INODE' ../fs/fs-writeback.c:1984: warning: Excess function parameter 'flags' description in 'I_DIRTY_INODE' Signed-off-by: Randy Dunlap Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/filemap.c: make global sync not clear error status of individual inodes

2015-11-06T03:34:48Z

filemap_fdatawait() is a function to wait for on-going writeback to complete but also consume and clear error status of the mapping set during writeback. The latter functionality is critical for applications to detect writeback error with system calls like fsync(2)/fdatasync(2). However filemap_fdatawait() is also used by sync(2) or FIFREEZE ioctl, which don't check error status of individual mappings. As a result, fsync() may not be able to detect writeback error if events happen in the following order: Application System admin ---------------------------------------------------------- write data on page cache Run sync command writeback completes with error filemap_fdatawait() clears error fsync returns success (but the data is not on disk) This patch adds filemap_fdatawait_keep_errors() for call sites where writeback error is not handled so that they don't clear error status. Signed-off-by: Jun'ichi Nomura Acked-by: Andi Kleen Reviewed-by: Tejun Heo Cc: Fengguang Wu Cc: Dave Chinner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

fs/writeback, rcu: Don't use list_entry_rcu() for pointer offsetting in bdi_split_work_to_wbs()

2015-10-28T12:17:30Z

bdi_split_work_to_wbs() uses list_for_each_entry_rcu_continue() to walk @bdi->wb_list. To set up the initial iteration condition, it uses list_entry_rcu() to calculate the entry pointer corresponding to the list head; however, this isn't an actual RCU dereference and using list_entry_rcu() for it ended up breaking a proposed list_entry_rcu() change because it was feeding an non-lvalue pointer into the macro. Don't use the RCU variant for simple pointer offsetting. Use list_entry() instead. Reported-by: Ingo Molnar Signed-off-by: Tejun Heo Cc: Darren Hart Cc: David Howells Cc: Dipankar Sarma Cc: Eric Dumazet Cc: Frederic Weisbecker Cc: Josh Triplett Cc: Lai Jiangshan Cc: Linus Torvalds Cc: Mathieu Desnoyers Cc: Oleg Nesterov Cc: Patrick Marlier Cc: Paul McKenney Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Cc: pranith kumar Link: http://lkml.kernel.org/r/20151027051939.GA19355@mtj.duckdns.org Signed-off-by: Ingo Molnar

writeback: bdi_writeback iteration must not skip dying ones

2015-10-12T16:31:12Z

bdi_for_each_wb() is used in several places to wake up or issue writeback work items to all wb's (bdi_writeback's) on a given bdi. The iteration is performed by walking bdi->cgwb_tree; however, the tree only indexes wb's which are currently active. For example, when a memcg gets associated with a different blkcg, the old wb is removed from the tree so that the new one can be indexed. The old wb starts dying from then on but will linger till all its inodes are drained. As these dying wb's may still host dirty inodes, writeback operations which affect all wb's must include them. bdi_for_each_wb() skipping dying wb's led to sync(2) missing and failing to sync the inodes belonging to those wb's. This patch adds a RCU protected @bdi->wb_list which lists all wb's beloinging to that bdi. wb's are added on creation and removed on release rather than on the start of destruction. bdi_for_each_wb() usages are replaced with list_for_each[_continue]_rcu() iterations over @bdi->wb_list and bdi_for_each_wb() and its helpers are removed. v2: Updated as per Jan. last_wb ref leak in bdi_split_work_to_wbs() fixed and unnecessary list head severing in cgwb_bdi_destroy() removed. Signed-off-by: Tejun Heo Reported-and-tested-by: Artem Bityutskiy Fixes: ebe41ab0c79d ("writeback: implement bdi_for_each_wb()") Link: http://lkml.kernel.org/g/1443012552.19983.209.camel@gmail.com Cc: Jan Kara Signed-off-by: Jens Axboe

writeback: fix bdi_writeback iteration in wakeup_dirtytime_writeback()

2015-10-12T16:31:11Z

wakeup_dirtytime_writeback() walks and wakes up all wb's of all bdi's; unfortunately, it was always waking up bdi->wb instead of the wb being walked. Fix it. Signed-off-by: Tejun Heo Fixes: 001fe6f617b1 ("writeback: make wakeup_dirtytime_writeback() handle multiple bdi_writeback's") Reviewed-by: Jan Kara Signed-off-by: Jens Axboe

fs-writeback: unplug before cond_resched in writeback_sb_inodes

2015-09-20T01:50:19Z

Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and writeback_inodes_wb()") has us holding a plug during writeback_sb_inodes, which increases the merge rate when relatively contiguous small files are written by the filesystem. It helps both on flash and spindles. For an fs_mark workload creating 4K files in parallel across 8 drives, this commit improves performance ~9% more by unplugging before calling cond_resched(). cond_resched() doesn't trigger an implicit unplug, so explicitly getting the IO down to the device before scheduling reduces latencies for anyone waiting on clean pages. It also cuts down on how often we use kblockd to unplug, which means less work bouncing from one workqueue to another. Many more details about how we got here: https://lkml.org/lkml/2015/9/11/570 Signed-off-by: Chris Mason Signed-off-by: Linus Torvalds

writeback: plug writeback in wb_writeback() and writeback_inodes_wb()

2015-09-12T18:13:07Z

We had to revert the pluggin in writeback_sb_inodes() because the wb->list_lock is held, but we could easily plug at a higher level before taking that lock, and unplug after releasing it. This does that. Chris will run performance numbers, just to verify that this approach is comparable to the alternative (we could just drop and re-take the lock around the blk_finish_plug() rather than these two commits. I'd have preferred waiting for actual performance numbers before picking one approach over the other, but I don't want to release rc1 with the known "sleeping function called from invalid context" issue, so I'll pick this cleanup version for now. But if the numbers show that we really want to plug just at the writeback_sb_inodes() level, and we should just play ugly games with the spinlock, we'll switch to that. Cc: Chris Mason Cc: Josef Bacik Cc: Dave Chinner Cc: Neil Brown Cc: Jan Kara Cc: Christoph Hellwig Signed-off-by: Linus Torvalds

Revert "writeback: plug writeback at a high level"

2015-09-11T20:26:39Z

This reverts commit d353d7587d02116b9732d5c06615aed75a4d3a47. Doing the block layer plug/unplug inside writeback_sb_inodes() is broken, because that function is actually called with a spinlock held: wb->list_lock, as pointed out by Chris Mason. Chris suggested just dropping and re-taking the spinlock around the blk_finish_plug() call (the plgging itself can happen under the spinlock), and that would technically work, but is just disgusting. We do something fairly similar - but not quite as disgusting because we at least have a better reason for it - in writeback_single_inode(), so it's not like the caller can depend on the lock being held over the call, but in this case there just isn't any good reason for that "release and re-take the lock" pattern. [ In general, we should really strive to avoid the "release and retake" pattern for locks, because in the general case it can easily cause subtle bugs when the caller caches any state around the call that might be invalidated by dropping the lock even just temporarily. ] But in this case, the plugging should be easy to just move up to the callers before the spinlock is taken, which should even improve the effectiveness of the plug. So there is really no good reason to play games with locking here. I'll send off a test-patch so that Dave Chinner can verify that that plug movement works. In the meantime this just reverts the problematic commit and adds a comment to the function so that we hopefully don't make this mistake again. Reported-by: Chris Mason Cc: Josef Bacik Cc: Dave Chinner Cc: Neil Brown Cc: Jan Kara Cc: Christoph Hellwig Signed-off-by: Linus Torvalds

Merge branch 'for-4.3/blkcg' of git://git.kernel.dk/linux-block

2015-09-11T01:56:14Z

Pull blk-cg updates from Jens Axboe: "A bit later in the cycle, but this has been in the block tree for a a while. This is basically four patchsets from Tejun, that improve our buffered cgroup writeback. It was dependent on the other cgroup changes, but they went in earlier in this cycle. Series 1 is set of 5 patches that has cgroup writeback updates: - bdi_writeback iteration fix which could lead to some wb's being skipped or repeated during e.g. sync under memory pressure. - Simplification of wb work wait mechanism. - Writeback tracepoints updated to report cgroup. Series 2 is is a set of updates for the CFQ cgroup writeback handling: cfq has always charged all async IOs to the root cgroup. It didn't have much choice as writeback didn't know about cgroups and there was no way to tell who to blame for a given writeback IO. writeback finally grew support for cgroups and now tags each writeback IO with the appropriate cgroup to charge it against. This patchset updates cfq so that it follows the blkcg each bio is tagged with. Async cfq_queues are now shared across cfq_group, which is per-cgroup, instead of per-request_queue cfq_data. This makes all IOs follow the weight based IO resource distribution implemented by cfq. - Switched from GFP_ATOMIC to GFP_NOWAIT as suggested by Jeff. - Other misc review points addressed, acks added and rebased. Series 3 is the blkcg policy cleanup patches: This patchset contains assorted cleanups for blkcg_policy methods and blk[c]g_policy_data handling. - alloc/free added for blkg_policy_data. exit dropped. - alloc/free added for blkcg_policy_data. - blk-throttle's async percpu allocation is replaced with direct allocation. - all methods now take blk[c]g_policy_data instead of blkcg_gq or blkcg. And finally, series 4 is a set of patches cleaning up the blkcg stats handling: blkcg's stats have always been somwhat of a mess. This patchset tries to improve the situation a bit. - The following patches added to consolidate blkcg entry point and blkg creation. This is in itself is an improvement and helps colllecting common stats on bio issue. - per-blkg stats now accounted on bio issue rather than request completion so that bio based and request based drivers can behave the same way. The issue was spotted by Vivek. - cfq-iosched implements custom recursive stats and blk-throttle implements custom per-cpu stats. This patchset make blkcg core support both by default. - cfq-iosched and blk-throttle keep track of the same stats multiple times. Unify them" * 'for-4.3/blkcg' of git://git.kernel.dk/linux-block: (45 commits) blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy blkcg: s/CFQ_WEIGHT_*/CFQ_WEIGHT_LEGACY_*/ blkcg: implement interface for the unified hierarchy blkcg: misc preparations for unified hierarchy interface blkcg: separate out tg_conf_updated() from tg_set_conf() blkcg: move body parsing from blkg_conf_prep() to its callers blkcg: mark existing cftypes as legacy blkcg: rename subsystem name from blkio to io blkcg: refine error codes returned during blkcg configuration blkcg: remove unnecessary NULL checks from __cfqg_set_weight_device() blkcg: reduce stack usage of blkg_rwstat_recursive_sum() blkcg: remove cfqg_stats->sectors blkcg: move io_service_bytes and io_serviced stats into blkcg_gq blkcg: make blkg_[rw]stat_recursive_sum() to be able to index into blkcg_gq blkcg: make blkcg_[rw]stat per-cpu blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it blkcg: consolidate blkg creation in blkcg_bio_issue_check() blk-throttle: improve queue bypass handling blkcg: move root blkg lookup optimization from throtl_lookup_tg() to __blkg_lookup() blkcg: inline [__]blkg_lookup() ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2015-09-06T03:34:28Z

Pull vfs updates from Al Viro: "In this one: - d_move fixes (Eric Biederman) - UFS fixes (me; locking is mostly sane now, a bunch of bugs in error handling ought to be fixed) - switch of sb_writers to percpu rwsem (Oleg Nesterov) - superblock scalability (Josef Bacik and Dave Chinner) - swapon(2) race fix (Hugh Dickins)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits) vfs: Test for and handle paths that are unreachable from their mnt_root dcache: Reduce the scope of i_lock in d_splice_alias dcache: Handle escaped paths in prepend_path mm: fix potential data race in SyS_swapon inode: don't softlockup when evicting inodes inode: rename i_wb_list to i_io_list sync: serialise per-superblock sync operations inode: convert inode_sb_list_lock to per-sb inode: add hlist_fake to avoid the inode hash lock in evict writeback: plug writeback at a high level change sb_writers to use percpu_rw_semaphore shift percpu_counter_destroy() into destroy_super_work() percpu-rwsem: kill CONFIG_PERCPU_RWSEM percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire() percpu-rwsem: introduce percpu_down_read_trylock() document rwsem_release() in sb_wait_write() fix the broken lockdep logic in __sb_start_write() introduce __sb_writers_{acquired,release}() helpers ufs_inode_get{frag,block}(): get rid of 'phys' argument ufs_getfrag_block(): tidy up a bit ...