linux/fs/sysfs, branch v2.6.34

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

sysfs: Kill unused sysfs_sb variable.

2010-03-08T01:04:52Z

Now that there are no more users we can remove the sysfs_sb variable. Acked-by: Tejun Heo Acked-by: Serge Hallyn Signed-off-by: Eric W. Biederman Signed-off-by: Greg Kroah-Hartman

sysfs: Pass super_block to sysfs_get_inode

2010-03-08T01:04:52Z

Currently sysfs_get_inode magically returns an inode on sysfs_sb. Make the super_block parameter explicit and the code becomes clearer. Acked-by: Tejun Heo Acked-by: Serge Hallyn Signed-off-by: Eric W. Biederman Signed-off-by: Greg Kroah-Hartman

sysfs: Implement sysfs_rename_link

2010-03-08T01:04:52Z

Because of rename ordering problems we occassionally give false warnings about invalid sysfs operations. So using sysfs_rename create a sysfs_rename_link function that doesn't need strange workarounds. Cc: Benjamin Thery Cc: Daniel Lezcano Acked-by: Serge Hallyn Acked-by: Tejun Heo Signed-off-by: Eric W. Biederman Signed-off-by: Greg Kroah-Hartman

sysfs: Pack sysfs_dirent more tightly.

2010-03-08T01:04:52Z

Placing the 16bit s_mode between a pointer and a long doesn't pack well especailly on 64bit where we wast 48 bits. So move s_mode and declare it as a unsigned short. This is the sysfs backing store after all we don't need fields extra large just in case someday we want userspace to be able to use a larger value. Acked-by: Tejun Heo Signed-off-by: Eric W. Biederman Signed-off-by: Greg Kroah-Hartman

sysfs: Serialize updates to the vfs inode

2010-03-08T01:04:52Z

The vfs depends upon filesystem methods to update the vfs inode. Sysfs adds to the normal number of places where the vfs inode is updated by also updatng the vfs inode in sysfs_refresh_inode. Typically the inode mutex is used to serialize updates to the vfs inode, but grabbing the inode mutex in sysfs_permission and sysfs_getattr causes deadlocks, because sometimes the vfs calls those operations with the inode mutex held. Therefore sysfs can not use the inode mutex to serial updates to the vfs inode. The sysfs_mutex is acquired in all of the routines where sysfs updates the vfs inode, and with a small change we can consistently protext sysfs vfs inode updates with the sysfs_mutex. To protect the sysfs vfs inode updates with the sysfs_mutex simply requires extending the scope of sysfs_mutex in sysfs_setattr over inode_setattr, and over inode_change_ok (so we have an unchanging inode when we perform the check). Acked-by: Serge Hallyn Signed-off-by: Eric W. Biederman Signed-off-by: Greg Kroah-Hartman

sysfs: Use one lockdep class per sysfs attribute.

2010-03-08T01:04:51Z

Acknowledge that the logical sysfs rwsem has one instance per sysfs attribute with different locking depencencies for different attributes. There is a sysfs idiom where writing to one sysfs file causes the addition or removal of other sysfs files. Lumping all of the sysfs attributes together in one lock class causes lockdep to generate lots of false positives. This introduces the requirement that non-static sysfs attributes need to be initialized with sysfs_attr_init or sysfs_bin_attr_init. Strictly speaking this requirement only exists when lockdep is enabled, and when lockdep is enabled we get a bit fat warning if this requirement is not met. Signed-off-by: Eric W. Biederman Acked-by: WANG Cong Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman

sysfs: Only take active references on attributes.

2010-03-08T01:04:51Z

If we exclude directories and symlinks from the set of sysfs dirents where we need active references we are left with sysfs attributes (binary or not). - Tweak sysfs_deactivate to only do something on attributes - Move lockdep initialization into sysfs_file_add_mode to limit it to just attributes. Signed-off-by: Eric W. Biederman Acked-by: WANG Cong Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman

sysfs: Remove sysfs_get/put_active_two

2010-03-08T01:04:51Z

It turns out that holding an active reference on a directory is pointless. The purpose of the active references are to allows us to block when removing sysfs entries that have custom methods so we don't remove modules while running modular code and to keep those custom methods from accessing data structures after the files have been removed. Further sysfs_remove_dir remove all elements in the directory before removing the directory itself, so there is no chance we will remove a directory with active children. Signed-off-by: Eric W. Biederman Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman

Driver core: Constify struct sysfs_ops in struct kobj_type

2010-03-08T01:04:49Z

Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy Acked-by: David Teigland Acked-by: Matt Domsch Acked-by: Maciej Sosnowski Acked-by: Hans J. Koch Acked-by: Pekka Enberg Acked-by: Jens Axboe Acked-by: Stephen Hemminger Signed-off-by: Greg Kroah-Hartman