linux/fs, branch v5.12

ovl: fix reference counting in ovl_mmap error path

2021-04-23T21:42:39Z

mmap_region() now calls fput() on the vma->vm_file. Fix this by using vma_set_file() so it doesn't need to be handled manually here any more. Link: https://lkml.kernel.org/r/20210421132012.82354-2-christian.koenig@amd.com Fixes: 1527f926fd04 ("mm: mmap: fix fput in error path v2") Signed-off-by: Christian König Reviewed-by: Daniel Vetter Cc: Jan Harkes Cc: Miklos Szeredi Cc: Jason Gunthorpe Cc: [5.11+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

coda: fix reference counting in coda_file_mmap error path

2021-04-23T21:42:39Z

mmap_region() now calls fput() on the vma->vm_file. So we need to drop the extra reference on the coda file instead of the host file. Link: https://lkml.kernel.org/r/20210421132012.82354-1-christian.koenig@amd.com Fixes: 1527f926fd04 ("mm: mmap: fix fput in error path v2") Signed-off-by: Christian König Reviewed-by: Daniel Vetter Acked-by: Jan Harkes Cc: Miklos Szeredi Cc: Jason Gunthorpe Cc: [5.11+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

readdir: make sure to verify directory entry for legacy interfaces too

2021-04-17T18:39:49Z

This does the directory entry name verification for the legacy "fillonedir" (and compat) interface that goes all the way back to the dark ages before we had a proper dirent, and the readdir() system call returned just a single entry at a time. Nobody should use this interface unless you still have binaries from 1991, but let's do it right. This came up during discussions about unsafe_copy_to_user() and proper checking of all the inputs to it, as the networking layer is looking to use it in a few new places. So let's make sure the _old_ users do it all right and proper, before we add new ones. See also commit 8a23eb804ca4 ("Make filldir[64]() verify the directory entry filename is valid") which did the proper modern interfaces that people actually use. It had a note: Note that I didn't bother adding the checks to any legacy interfaces that nobody uses. which this now corrects. Note that we really don't care about POSIX and the presense of '/' in a directory entry, but verify_dirent_name() also ends up doing the proper name length verification which is what the input checking discussion was about. [ Another option would be to remove the support for this particular very old interface: any binaries that use it are likely a.out binaries, and they will no longer run anyway since we removed a.out binftm support in commit eac616557050 ("x86: Deprecate a.out support"). But I'm not sure which came first: getdents() or ELF support, so let's pretend somebody might still have a working binary that uses the legacy readdir() case.. ] Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/ Acked-by: Al Viro Signed-off-by: Linus Torvalds

Merge tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block

2021-04-16T23:18:53Z

Pull io_uring fix from Jens Axboe: "Fix for a potential hang at exit with SQPOLL from Pavel" * tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block: io_uring: fix early sqd_list removal sqpoll hangs

io_uring: fix early sqd_list removal sqpoll hangs

2021-04-14T19:07:27Z

[ 245.463317] INFO: task iou-sqp-1374:1377 blocked for more than 122 seconds. [ 245.463334] task:iou-sqp-1374 state:D flags:0x00004000 [ 245.463345] Call Trace: [ 245.463352] __schedule+0x36b/0x950 [ 245.463376] schedule+0x68/0xe0 [ 245.463385] __io_uring_cancel+0xfb/0x1a0 [ 245.463407] do_exit+0xc0/0xb40 [ 245.463423] io_sq_thread+0x49b/0x710 [ 245.463445] ret_from_fork+0x22/0x30 It happens when sqpoll forgot to run park_task_work and goes to exit, then exiting user may remove ctx from sqd_list, and so corresponding io_sq_thread() -> io_uring_cancel_sqpoll() won't be executed. Hopefully it just stucks in do_exit() in this case. Fixes: dbe1bdbb39db ("io_uring: handle signals for IO threads like a normal thread") Reported-by: Joakim Hassila Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe

Merge tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

2021-04-11T18:53:36Z

Pull btrfs fix from David Sterba: "One more patch that we'd like to get to 5.12 before release. It's changing where and how the superblock is stored in the zoned mode. It is an on-disk format change but so far there are no implications for users as the proper mkfs support hasn't been merged and is waiting for the kernel side to settle. Until now, the superblocks were derived from the zone index, but zone size can differ per device. This is changed to be based on fixed offset values, to make it independent of the device zone size. The work on that got a bit delayed, we discussed the exact locations to support potential device sizes and usecases. (Partially delayed also due to my vacation.) Having that in the same release where the zoned mode is declared usable is highly desired, there are userspace projects that need to be updated to recognize the feature. Pushing that to the next release would make things harder to test" * tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: move superblock logging zone location

btrfs: zoned: move superblock logging zone location

2021-04-10T10:13:16Z

Moves the location of the superblock logging zones. The new locations of the logging zones are now determined based on fixed block addresses instead of on fixed zone numbers. The old placement method based on fixed zone numbers causes problems when one needs to inspect a file system image without access to the drive zone information. In such case, the super block locations cannot be reliably determined as the zone size is unknown. By locating the superblock logging zones using fixed addresses, we can scan a dumped file system image without the zone information since a super block copy will always be present at or after the fixed known locations. Introduce the following three pairs of zones containing fixed offset locations, regardless of the device zone size. - primary superblock: offset 0B (and the following zone) - first copy: offset 512G (and the following zone) - Second copy: offset 4T (4096G, and the following zone) If a logging zone is outside of the disk capacity, we do not record the superblock copy. The first copy position is much larger than for a non-zoned filesystem, which is at 64M. This is to avoid overlapping with the log zones for the primary superblock. This higher location is arbitrary but allows supporting devices with very large zone sizes, plus some space around in between. Such large zone size is unrealistic and very unlikely to ever be seen in real devices. Currently, SMR disks have a zone size of 256MB, and we are expecting ZNS drives to be in the 1-4GB range, so this limit gives us room to breathe. For now, we only allow zone sizes up to 8GB. The maximum zone size that would still fit in the space is 256G. The fixed location addresses are somewhat arbitrary, with the intent of maintaining superblock reliability for smaller and larger devices, with the preference for the latter. For this reason, there are two superblocks under the first 1T. This should cover use cases for physical devices and for emulated/device-mapper devices. The superblock logging zones are reserved for superblock logging and never used for data or metadata blocks. Note that we only reserve the two zones per primary/copy actually used for superblock logging. We do not reserve the ranges of zones possibly containing superblocks with the largest supported zone size (0-16GB, 512G-528GB, 4096G-4112G). The zones containing the fixed location offsets used to store superblocks on a non-zoned volume are also reserved to avoid confusion. Signed-off-by: Naohiro Aota Signed-off-by: David Sterba

Merge branch 'akpm' (patches from Andrew)

2021-04-10T00:06:32Z

Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: mm (kasan, gup, pagecache, and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib" * emailed patches from Andrew Morton : lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS kfence, x86: fix preemptible warning on KPTI-enabled systems lib/test_kasan_module.c: suppress unused var warning kasan: fix conflict with page poisoning fs: direct-io: fix missing sdio->boundary ia64: fix user_stack_pointer() for ptrace() ocfs2: fix deadlock between setattr and dio_end_io_write gcov: re-fix clang-11+ support nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff mm/gup: check page posion status for coredump. .mailmap: fix old email addresses mailmap: update email address for Jordan Crouse treewide: change my e-mail address, fix my name MAINTAINERS: update CZ.NIC's Turris information

Merge tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block

2021-04-09T22:06:52Z

Pull io_uring fixes from Jens Axboe: "Two minor fixups for the reissue logic, and one for making sure that unbounded work is canceled on io-wq exit" * tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block: io-wq: cancel unbounded works on io-wq destroy io_uring: fix rw req completion io_uring: clear F_REISSUE right after getting it

fs: direct-io: fix missing sdio->boundary

2021-04-09T21:54:23Z

I encountered a hung task issue, but not a performance one. I run DIO on a device (need lba continuous, for example open channel ssd), maybe hungtask in below case: DIO: Checkpoint: get addr A(at boundary), merge into BIO, no submit because boundary missing flush dirty data(get addr A+1), wait IO(A+1) writeback timeout, because DIO(A) didn't submit get addr A+2 fail, because checkpoint is doing dio_send_cur_page() may clear sdio->boundary, so prevent it from missing a boundary. Link: https://lkml.kernel.org/r/20210322042253.38312-1-jack.qiu@huawei.com Fixes: b1058b981272 ("direct-io: submit bio after boundary buffer is added to it") Signed-off-by: Jack Qiu Reviewed-by: Jan Kara Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds