linux/include/acpi, branch v3.19

ACPI / processor: Convert apic_id to phys_id to make it arch agnostic

2015-01-05T22:32:42Z

apic_id in MADT table is the CPU hardware id which identify it self in the system for x86 and ia64, OSPM will use it for SMP init to map APIC ID to logical cpu number in the early boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the ACPI processor driver is probed and the driver will use acpi_id in DSDT to get the apic_id, then map to the logical cpu number which is needed by the processor driver. Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec, so apic_id is used both in arch code and ACPI core which is pretty fine. Since ACPI 5.0, ARM is supported by ACPI and APIC is not available on ARM, this will confuse people when apic_id is both used by x86 and ARM in one function. So convert apic_id to phys_id (which is the original meaning) in ACPI processor dirver to make it arch agnostic, but leave the arch dependent code unchanged, no functional change. Signed-off-by: Hanjun Guo Signed-off-by: Rafael J. Wysocki

Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm'

2014-12-18T17:42:56Z

* acpi-scan: ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG * acpi-utils: ACPI / utils: Drop error messages from acpi_evaluate_reference() * acpi-pm: ACPI / PM: Do not disable wakeup GPEs that have not been enabled

ACPI / PM: Do not disable wakeup GPEs that have not been enabled

2014-12-12T21:51:58Z

In some cases acpi_device_wakeup() may be called to ensure wakeup power to be off for a given device even though that device's wakeup GPE has not been enabled so far. It calls acpi_disable_gpe() on a GPE that's not enabled and this causes ACPICA to return the AE_LIMIT status code from that call which then is reported as an error by the ACPICA's debug facilities (if enabled). This may lead to a fair amount of confusion, so introduce a new ACPI device wakeup flag to store the wakeup GPE status and avoid disabling wakeup GPEs that have not been enabled. Reported-and-tested-by: Venkat Raghavulu Signed-off-by: Rafael J. Wysocki

Merge branch 'pm-runtime'

2014-12-08T19:00:44Z

* pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...

Merge branches 'acpi-scan', 'acpi-pm', 'acpi-lpss' and 'acpi-processor'

2014-12-08T18:52:16Z

* acpi-scan: ACPI: Add _DEP support to fix battery issue on Asus T100TA * acpi-pm: ACPI / sleep: Drain outstanding events after disabling multiple GPEs ACPI / PM: Fixed a typo in a comment * acpi-lpss: dmaengine: dw: enable runtime PM ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA ACPI / LPSS: allow to use specific PM domain during ->probe() ACPI / LPSS: add all LPSS devices to the specific power domain * acpi-processor: ACPI / cpuidle: avoid assigning signed errno to acpi_status ACPI / processor: remove unused variabled from acpi_processor_power structure ACPI / processor: Update the comments in processor.h

Merge branch 'acpica'

2014-12-08T18:52:08Z

* acpica: ACPICA: Events: Always modify GPE registers under the GPE lock ACPICA: Save current masks of enabled GPEs after enable register writes ACPICA: Update version to 20141107. ACPICA: Disassembler: Emit correct string for 0 stop bits. ACPICA: Disassembler: Update for C-style expressions. ACPICA: Disassembler: Add support for C-style operators and expressions. ACPICA: acpiexec: Add option to specify an object initialization file. ACPICA: iASL: Add support for to_PLD macro.

ACPI / PM: Drop CONFIG_PM_RUNTIME from the ACPI core

2014-12-03T23:50:19Z

After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in the ACPI core code. Reviewed-by: Ulf Hansson Acked-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki

ACPICA: Save current masks of enabled GPEs after enable register writes

2014-12-01T22:50:16Z

There is a race condition between acpi_hw_disable_all_gpes() or acpi_enable_all_wakeup_gpes() and acpi_ev_asynch_enable_gpe() such that if the latter wins the race, it may mistakenly enable a GPE disabled by the former. This may lead to premature system wakeups during system suspend and potentially to more serious consequences. The source of the problem is how acpi_hw_low_set_gpe() works when passed ACPI_GPE_CONDITIONAL_ENABLE as the second argument. In that case, the GPE will be enabled if the corresponding bit is set in the enable_for_run mask of the GPE enable register containing that bit. However, acpi_hw_disable_all_gpes() and acpi_enable_all_wakeup_gpes() don't modify the enable_for_run masks of GPE registers when writing to them. In consequence, if acpi_ev_asynch_enable_gpe(), which eventually calls acpi_hw_low_set_gpe() with the second argument equal to ACPI_GPE_CONDITIONAL_ENABLE, is executed in parallel with one of these functions, it may reverse changes made by them. To fix the problem, introduce a new enable_mask field in struct acpi_gpe_register_info in which to store the current mask of enabled GPEs and modify acpi_hw_low_set_gpe() to take this mask into account instead of enable_for_run when its second argument is equal to ACPI_GPE_CONDITIONAL_ENABLE. Also modify the low-level routines called by acpi_hw_disable_all_gpes(), acpi_enable_all_wakeup_gpes() and acpi_enable_all_runtime_gpes() to update the enable_mask masks of GPE registers after all (successful) writes to those registers. Acked-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPICA: Update version to 20141107.

2014-11-27T23:00:53Z

Version 20141107. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPICA: iASL: Add support for to_PLD macro.

2014-11-27T23:00:52Z

This macro is intended to simplify the constuction of _PLD buffers. NOTE: Prototype only, subject to change before this macro is added to the ACPI specification. David E. Box. Signed-off-by: David E. Box Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki