linux/include/asm-generic/vmlinux.lds.h, branch v4.1

Merge tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2015-04-21T16:33:10Z

Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver update for 4.1-rc1. It was delayed for a bit due to some questions surrounding some of the console command line parsing changes that are in here. There's still one tiny regression for people who were previously putting multiple console command lines and expecting them all to be ignored for some odd reason, but Peter is working on fixing that. If not, I'll send a revert for the offending patch, but I have faith that Peter can address it. Other than the console work here, there's the usual serial driver updates and changes, and a buch of 8250 reworks to try to make that driver easier to maintain over time, and have it support more devices in the future. All of these have been in linux-next for a while" * tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) n_gsm: Drop unneeded cast on netdev_priv sc16is7xx: expose RTS inversion in RS-485 mode serial: 8250_pci: port failed after wakeup from S3 earlycon: 8250: Document kernel command line options earlycon: 8250: Fix command line regression earlycon: Fix __earlycon_table stride tty: clean up the tty time logic a bit serial: 8250_dw: only get the clock rate in one place serial: 8250_dw: remove useless ACPI ID check dmaengine: hsu: move memory allocation to GFP_NOWAIT dmaengine: hsu: remove redundant pieces of code serial: 8250_pci: add Intel Tangier support dmaengine: hsu: add Intel Tangier PCI ID serial: 8250_pci: replace switch-case by formula for Intel MID serial: 8250_pci: replace switch-case by formula tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1 serial: jsm: some off by one bugs serial: xuartps: Fix check in console_setup(). serial: xuartps: Get rid of register access macros. serial: xuartps: Fix iobase use. ...

Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

2015-04-15T04:03:26Z

Pull ARM updates from Russell King: "Included in this update are both some long term fixes and some new features. Fixes: - An integer overflow in the calculation of ELF_ET_DYN_BASE. - Avoiding OOMs for high-order IOMMU allocations - SMP requires the data cache to be enabled for synchronisation primitives to work, so prevent the CPU_DCACHE_DISABLE option being visible on SMP builds. - A bug going back 10+ years in the noMMU ARM94* CPU support code, where it corrupts registers. Found by folk getting Linux running on their cameras. - Versatile Express needs an errata workaround enabled for CPU hot-unplug to work. Features: - Clean up module linker by handling out of range relocations separately from relocation cases we don't handle. - Fix a long term bug in the pci_mmap_page_range() code, which we hope won't impact userspace (we hope there's no users of the existing broken interface.) - Don't map DMA coherent allocations when we don't have a MMU. - Drop experimental status for SMP_ON_UP. - Warn when DT doesn't specify ePAPR mandatory cache properties. - Add documentation concerning how we find the start of physical memory for AUTO_ZRELADDR kernels, detailing why we have chosen the mask and the implications of changing it. - Updates from Ard Biesheuvel to address some issues with large kernels (such as allyesconfig) failing to link. - Allow hibernation to work on modern (ARMv7) CPUs - this appears to have never worked in the past on these CPUs. - Enable IRQ_SHOW_LEVEL, which changes the /proc/interrupts output format (hopefully without userspace breaking... let's hope that if it causes someone a problem, they tell us.) - Fix tegra-ahb DT offsets. - Rework ARM errata 643719 code (and ARMv7 flush_cache_louis()/ flush_dcache_all()) code to be more efficient, and enable this errata workaround by default for ARMv7+SMP CPUs. This complements the Versatile Express fix above. - Rework ARMv7 context code for errata 430973, so that only Cortex A8 CPUs are impacted by the branch target buffer flush when this errata is enabled. Also update the help text to indicate that all r1p* A8 CPUs are impacted. - Switch ARM to the generic show_mem() implementation, it conveys all the information which we were already reporting. - Prevent slow timer sources being used for udelay() - timers running at less than 1MHz are not useful for this, and can cause udelay() to return immediately, without any wait. Using such a slow timer is silly. - VDSO support for 32-bit ARM, mainly for gettimeofday() using the ARM architected timer. - Perf support for Scorpion performance monitoring units" vdso semantic conflict fixed up as per linux-next. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (52 commits) ARM: update errata 430973 documentation to cover Cortex A8 r1p* ARM: ensure delay timer has sufficient accuracy for delays ARM: switch to use the generic show_mem() implementation ARM: proc-v7: avoid errata 430973 workaround for non-Cortex A8 CPUs ARM: enable ARM errata 643719 workaround by default ARM: cache-v7: optimise test for Cortex A9 r0pX devices ARM: cache-v7: optimise branches in v7_flush_cache_louis ARM: cache-v7: consolidate initialisation of cache level index ARM: cache-v7: shift CLIDR to extract appropriate field before masking ARM: cache-v7: use movw/movt instructions ARM: allow 16-bit instructions in ALT_UP() ARM: proc-arm94*.S: fix setup function ARM: vexpress: fix CPU hotplug with CT9x4 tile. ARM: 8276/1: Make CPU_DCACHE_DISABLE depend on !SMP ARM: 8335/1: Documentation: DT bindings: Tegra AHB: document the legacy base address ARM: 8334/1: amba: tegra-ahb: detect and correct bogus base address ARM: 8333/1: amba: tegra-ahb: fix register offsets in the macros ARM: 8339/1: Enable CONFIG_GENERIC_IRQ_SHOW_LEVEL ARM: 8338/1: kexec: Relax SMP validation to improve DT compatibility ARM: 8337/1: mm: Do not invoke OOM for higher order IOMMU DMA allocations ...

Merge tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2015-04-15T03:21:54Z

Pull power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups all over, although there are a few items that sort of fall into the new feature category. First off, we have new callbacks for PM domains that should help us to handle some issues related to device initialization in a better way. There also is some consolidation in the unified device properties API area allowing us to use that inferface for accessing data coming from platform initialization code in addition to firmware-provided data. We have some new device/CPU IDs in a few drivers, support for new chips and a new cpufreq driver too. Specifics: - Generic PM domains support update including new PM domain callbacks to handle device initialization better (Russell King, Rafael J Wysocki, Kevin Hilman) - Unified device properties API update including a new mechanism for accessing data provided by platform initialization code (Rafael J Wysocki, Adrian Hunter) - ARM cpuidle update including ARM32/ARM64 handling consolidation (Daniel Lezcano) - intel_idle update including support for the Silvermont Core in the Baytrail SOC and for the Airmont Core in the Cherrytrail and Braswell SOCs (Len Brown, Mathias Krause) - New cpufreq driver for Hisilicon ACPU (Leo Yan) - intel_pstate update including support for the Knights Landing chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi) - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann) - powernv cpufreq driver update (Shilpasri G Bhat) - devfreq update including Tegra support changes (Tomeu Vizoso, MyungJoo Ham, Chanwoo Choi) - powercap RAPL (Running-Average Power Limit) driver update including support for Intel Broadwell server chips (Jacob Pan, Mathias Krause) - ACPI device enumeration update related to the handling of the special PRP0001 device ID allowing DT-style 'compatible' property to be used for ACPI device identification (Rafael J Wysocki) - ACPI EC driver update including limited _DEP support (Lan Tianyu, Lv Zheng) - ACPI backlight driver update including a new mechanism to allow native backlight handling to be forced on non-Windows 8 systems and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede) - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu) - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger, Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki) - Fixes related to suspend-to-idle for the iTCO watchdog driver and the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu) - PM tracing support for the suspend phase of system suspend/resume transitions (Zhonghui Fu) - Configurable delay for the system suspend/resume testing facility (Brian Norris) - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) ACPI / scan: Fix NULL pointer dereference in acpi_companion_match() ACPI / scan: Rework modalias creation when "compatible" is present intel_idle: mark cpu id array as __initconst powercap / RAPL: mark rapl_ids array as __initconst powercap / RAPL: add ID for Broadwell server intel_pstate: Knights Landing support intel_pstate: remove MSR test cpufreq: fix qoriq uniprocessor build ACPI / scan: Take the PRP0001 position in the list of IDs into account ACPI / scan: Simplify acpi_match_device() ACPI / scan: Generalize of_compatible matching device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes PM / watchdog: iTCO: stop watchdog during system suspend cpufreq: hisilicon: add acpu driver ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler cpufreq: powernv: Report cpu frequency throttling intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs intel_idle: Update support for Silvermont Core in Baytrail SOC PM / devfreq: tegra: Register governor on module init ...

earlycon: Fix __earlycon_table stride

2015-04-10T12:39:53Z

The compiler and the linker must agree on the alignment of struct earlycon_id; empirical testing and commit 07fca0e57fca92 ("tracing: Properly align linker defined symbols") suggests 32-byte alignment is the LCD. Reported-by: Yinghai Lu Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values

2015-04-08T13:39:56Z

Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox Cc: Tony Luck Cc: Xie XiuQi Acked-by: Namhyung Kim Reviewed-by: Masami Hiramatsu Tested-by: Masami Hiramatsu Signed-off-by: Steven Rostedt

ARM: 8321/1: asm-generic: introduce .text.fixup input section

2015-03-29T22:11:55Z

This introduces a new .text.fixup input section that gets emitted together with the .text section for each input object file. Note that *(.text) *(.text.fixup) is not the same as *(.text .text.fixup) and we are looking for the latter, to ensure that fixup snippets that are assembled into a separate section in the object file do not end up out of range for the relative branch instructions it contains if the .text section itself grows very large. This helps prevent linker failures on large ARM kernels. Acked-by: Arnd Bergmann Signed-off-by: Ard Biesheuvel Signed-off-by: Russell King

serial: earlycon: Enable earlycon without command line param

2015-03-26T16:25:27Z

Earlycon matching can only be triggered if 'earlycon=...' has been specified on the kernel command line. To workaround this limitation requires tight coupling between arches and specific serial drivers in order to start an earlycon. Devicetree avoids this limitation with a link table that contains the required data to match earlycons. Mirror this approach for earlycon match by name. Re-purpose EARLYCON_DECLARE to generate a table entry which associates name with setup() function. Re-purpose setup_earlycon() to scan this table for an earlycon match, which is registered if found. Declare one "earlycon" early_param, which calls setup_earlycon(). This design allows setup_earlycon() to be called directly with a param string (as if 'earlycon=...' had been set on the command line). Re-registration (either directly or by early_param) is prevented. Acked-by: Rob Herring Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

ARM: cpuidle: Add a cpuidle ops structure to be used for DT

2015-03-24T09:16:01Z

The current state of the different cpuidle drivers is the different PM operations are passed via the platform_data using the platform driver paradigm. This approach allowed to split the low level PM code from the arch specific and the generic cpuidle code. Unfortunately there are complaints about this approach as, in the context of the single kernel image, we have multiple drivers loaded in memory for nothing and the platform driver is not adequate for cpuidle. This patch provides a common interface via cpuidle ops for all new cpuidle driver and a definition for the device tree. It will allow with the next patches to a have a common definition with ARM64 and share the same cpuidle driver. The code is optimized to use the __init section intensively in order to reduce the memory footprint after the driver is initialized and unify the function names with ARM64. Signed-off-by: Daniel Lezcano Acked-by: Kevin Hilman Acked-by: Rob Herring Acked-by: Catalin Marinas Tested-by: Lorenzo Pieralisi

kernel: add support for .init_array.* constructors

2015-02-14T05:21:42Z

KASan uses constructors for initializing redzones for global variables. Globals instrumentation in GCC 4.9.2 produces constructors with priority (.init_array.00099) Currently kernel ignores such constructors. Only constructors with default priority supported (.init_array) This patch adds support for constructors with priorities. For kernel image we put pointers to constructors between __ctors_start/__ctors_end and do_ctors() will call them on start up. For modules we merge .init_array.* sections into resulting .init_array. Module code properly handles constructors in .init_array section. Signed-off-by: Andrey Ryabinin Cc: Dmitry Vyukov Cc: Konstantin Serebryany Cc: Dmitry Chernenkov Signed-off-by: Andrey Konovalov Cc: Yuri Gribov Cc: Konstantin Khlebnikov Cc: Sasha Levin Cc: Christoph Lameter Cc: Joonsoo Kim Cc: Dave Hansen Cc: Andi Kleen Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

iommu: provide early initialisation hook for IOMMU drivers

2014-12-01T16:47:46Z

IOMMU drivers must be initialised before any of their upstream devices, otherwise the relevant iommu_ops won't be configured for the bus in question. To solve this, a number of IOMMU drivers use initcalls to initialise the driver before anything has a chance to be probed. Whilst this solves the immediate problem, it leaves the job of probing the IOMMU completely separate from the iommu_ops to configure the IOMMU, which are called on a per-bus basis and require the driver to figure out exactly which instance of the IOMMU is being requested. In particular, the add_device callback simply passes a struct device to the driver, which then has to parse firmware tables or probe buses to identify the relevant IOMMU instance. This patch takes the first step in addressing this problem by adding an early initialisation pass for IOMMU drivers, giving them the ability to store some per-instance data in their iommu_ops structure and store that in their of_node. This can later be used when parsing OF masters to identify the IOMMU instance in question. Acked-by: Arnd Bergmann Acked-by: Joerg Roedel Acked-by: Marek Szyprowski Tested-by: Robin Murphy Signed-off-by: Will Deacon