linux/include/asm-xtensa, branch v2.6.26

asm-{alpha,h8300,um,v850,xtensa}/param.h: unbreak HZ for userspace

2008-05-15T02:11:14Z

I noticed this because alpha was broken due to the recent commit commit bdc807871d58285737d50dc6163d0feb72cb0dc2 ("avoid overflows in kernel/time.c"). Most arches do something like this in their asm/param.h: #ifdef __KERNEL__ # define HZ CONFIG_HZ #else # define HZ 100 #endif A few arches though (namely alpha/h8300/um/v850/xtensa) either do no set HZ at all for !__KERNEL__, or they set it wrongly. This should bring all arches in line by setting up HZ for userspace. Without this currently perl 5.10 doesn't build on alpha: perl.c: In function 'perl_construct': perl.c:388: error: 'CONFIG_HZ' undeclared (first use in this function) -> http://buildd.debian.org/fetch.cgi?pkg=perl;ver=5.10.0-10;arch=alpha;stamp=1210252894 Signed-off-by: Mike Frysinger Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Yoshinori Sato Cc: Jeff Dike Cc: Chris Zankel Cc: maximilian attems Signed-off-by: Andrew Morton [ HZ on alpha is 1024 for historical reasons. - Linus ] Signed-off-by: Linus Torvalds

xtensa: types: use for the xtensa architecture

2008-05-02T23:18:42Z

This modifies to use the generic include files. Signed-off-by: H. Peter Anvin Cc: Chris Zankel

kernel: Move arches to use common unaligned access

2008-04-29T15:06:27Z

Unaligned access is ok for the following arches: cris, m68k, mn10300, powerpc, s390, x86 Arches that use the memmove implementation for native endian, and the byteshifting for the opposite endianness. h8300, m32r, xtensa Packed struct for native endian, byteshifting for other endian: alpha, blackfin, ia64, parisc, sparc, sparc64, mips, sh m86knommu is generic_be for Coldfire, otherwise unaligned access is ok. frv, arm chooses endianness based on compiler settings, uses the byteshifting versions. Remove the unaligned trap handler from frv as it is now unused. v850 is le, uses the byteshifting versions for both be and le. Remove the now unused asm-generic implementation. Signed-off-by: Harvey Harrison Acked-by: David S. Miller Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: introduce pte_special pte bit

2008-04-28T15:58:23Z

s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin Acked-by: Carsten Otte Cc: Jared Hulbert Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Generic semaphore implementation

2008-04-17T14:42:34Z

Semaphores are no longer performance-critical, so a generic C implementation is better for maintainability, debuggability and extensibility. Thanks to Peter Zijlstra for fixing the lockdep warning. Thanks to Harvey Harrison for pointing out that the unlikely() was unnecessary. Signed-off-by: Matthew Wilcox Acked-by: Ingo Molnar

kvm: provide kvm.h for all architecture: fixes headers_install

2008-04-02T22:28:18Z

Currently include/linux/kvm.h is not considered by make headers_install, because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h. This problem was introduced by commit fb56dbb31c4738a3918db81fd24da732ce3b4ae6 Author: Avi Kivity Date: Sun Dec 2 10:50:06 2007 +0200 KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM Currently, make headers_check barfs due to , which includes, not existing. Rather than add a zillion s, export kvm. only if the arch actually supports it. Signed-off-by: Avi Kivity which makes this an 2.6.25 regression. One way of solving the issue is to enhance Kbuild, but Avi and David conviced me, that changing headers_install is not the way to go. This patch changes the definition for linux/kvm.h to unifdef-y. If unifdef-y is used for linux/kvm.h "make headers_check" will fail on all architectures without asm/kvm.h. Therefore, this patch also provides asm/kvm.h on all architectures. Signed-off-by: Christian Borntraeger Acked-by: Avi Kivity Cc: Sam Ravnborg Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[XTENSA] Allow debugger to modify the WINDOWBASE register.

2008-02-14T01:45:36Z

For the 'return' command, GDB needs to adjust WINDOWBASE. In case WB is different from 0, we need to rotate the window register file and update WINDOWSTART and WMASK. This patch also removes some ret|= statements for __get_user/__put_user as the address range was alrady checked a couple of lines earlier. Signed-off-by: Chris Zankel

[XTENSA] Fix cache flush macro for D$/I$ aliasing/non-aliasing

2008-02-14T01:43:26Z

For configurations that have aliasing in the data cache but not in the instruction cache, we don't need to flush the instruction cache. Thus, we didn't define the macros to flush the instruction cache. Some cache-flush functions, howerver, were using those macros. Signed-off-by: Chris Zankel

[XTENSA] Exclude thread-global registers from the xtregs structures.

2008-02-14T01:43:00Z

Signed-off-by: Chris Zankel

[XTENSA] Add support for configurable registers and coprocessors

2008-02-14T01:41:43Z

The Xtensa architecture allows to define custom instructions and registers. Registers that are bound to a coprocessor are only accessible if the corresponding enable bit is set, which allows to implement a 'lazy' context switch mechanism. Other registers needs to be saved and restore at the time of the context switch or during interrupt handling. This patch adds support for these additional states: - save and restore registers that are used by the compiler upon interrupt entry and exit. - context switch additional registers unbound to any coprocessor - 'lazy' context switch of registers bound to a coprocessor - ptrace interface to provide access to additional registers - update configuration files in include/asm-xtensa/variant-fsf Signed-off-by: Chris Zankel