linux/include/crypto, branch v4.14

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

crypto: hash - add crypto_(un)register_ahashes()

2017-08-22T06:54:52Z

There are already helpers to (un)register multiple normal and AEAD algos. Add one for ahashes too. Signed-off-by: Lars Persson Signed-off-by: Rabin Vincent Signed-off-by: Herbert Xu

crypto: af_alg - consolidation of duplicate code

2017-08-09T12:18:32Z

Consolidate following data structures: skcipher_async_req, aead_async_req -> af_alg_async_req skcipher_rsgl, aead_rsql -> af_alg_rsgl skcipher_tsgl, aead_tsql -> af_alg_tsgl skcipher_ctx, aead_ctx -> af_alg_ctx Consolidate following functions: skcipher_sndbuf, aead_sndbuf -> af_alg_sndbuf skcipher_writable, aead_writable -> af_alg_writable skcipher_rcvbuf, aead_rcvbuf -> af_alg_rcvbuf skcipher_readable, aead_readable -> af_alg_readable aead_alloc_tsgl, skcipher_alloc_tsgl -> af_alg_alloc_tsgl aead_count_tsgl, skcipher_count_tsgl -> af_alg_count_tsgl aead_pull_tsgl, skcipher_pull_tsgl -> af_alg_pull_tsgl aead_free_areq_sgls, skcipher_free_areq_sgls -> af_alg_free_areq_sgls aead_wait_for_wmem, skcipher_wait_for_wmem -> af_alg_wait_for_wmem aead_wmem_wakeup, skcipher_wmem_wakeup -> af_alg_wmem_wakeup aead_wait_for_data, skcipher_wait_for_data -> af_alg_wait_for_data aead_data_wakeup, skcipher_data_wakeup -> af_alg_data_wakeup aead_sendmsg, skcipher_sendmsg -> af_alg_sendmsg aead_sendpage, skcipher_sendpage -> af_alg_sendpage aead_async_cb, skcipher_async_cb -> af_alg_async_cb aead_poll, skcipher_poll -> af_alg_poll Split out the following common code from recvmsg: af_alg_alloc_areq: allocation of the request data structure for the cipher operation af_alg_get_rsgl: creation of the RX SGL anchored in the request data structure The following changes to the implementation without affecting the functionality have been applied to synchronize slightly different code bases in algif_skcipher and algif_aead: The wakeup in af_alg_wait_for_data is triggered when either more data is received or the indicator that more data is to be expected is released. The first is triggered by user space, the second is triggered by the kernel upon finishing the processing of data (i.e. the kernel is ready for more). af_alg_sendmsg uses size_t in min_t calculation for obtaining len. Return code determination is consistent with algif_skcipher. The scope of the variable i is reduced to match algif_aead. The type of the variable i is switched from int to unsigned int to match algif_aead. af_alg_sendpage does not contain the superfluous err = 0 from aead_sendpage. af_alg_async_cb requires to store the number of output bytes in areq->outlen before the AIO callback is triggered. The POLLIN / POLLRDNORM is now set when either not more data is given or the kernel is supplied with data. This is consistent to the wakeup from sleep when the kernel waits for data. The request data structure is extended by the field last_rsgl which points to the last RX SGL list entry. This shall help recvmsg implementation to chain the RX SGL to other SG(L)s if needed. It is currently used by algif_aead which chains the tag SGL to the RX SGL during decryption. Signed-off-by: Stephan Mueller Signed-off-by: Herbert Xu

crypto: algapi - make crypto_xor() take separate dst and src arguments

2017-08-04T01:27:15Z

There are quite a number of occurrences in the kernel of the pattern if (dst != src) memcpy(dst, src, walk.total % AES_BLOCK_SIZE); crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE); or crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); where crypto_xor() is preceded or followed by a memcpy() invocation that is only there because crypto_xor() uses its output parameter as one of the inputs. To avoid having to add new instances of this pattern in the arm64 code, which will be refactored to implement non-SIMD fallbacks, add an alternative implementation called crypto_xor_cpy(), taking separate input and output arguments. This removes the need for the separate memcpy(). Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu

crypto: algapi - use separate dst and src operands for __crypto_xor()

2017-08-04T01:27:05Z

In preparation of introducing crypto_xor_cpy(), which will use separate operands for input and output, modify the __crypto_xor() implementation, which it will share with the existing crypto_xor(), which provides the actual functionality when not using the inline version. Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu

crypto: Add akcipher_set_reqsize() function

2017-07-28T09:58:04Z

Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu

crypto: kpp - add get/set_flags helpers

2017-07-18T09:50:57Z

These helpers will be used for fallbacks to kpp software implementations. Signed-off-by: Tudor Ambarus Signed-off-by: Herbert Xu

crypto: engine - replace pr_xxx by dev_xxx

2017-06-19T06:19:54Z

By adding a struct device *dev to struct engine, we could store the device used at register time and so use all dev_xxx functions instead of pr_xxx. Signed-off-by: Corentin Labbe Signed-off-by: Herbert Xu

crypto: akcipher - assume key is already set in maxsize

2017-06-10T04:04:29Z

As of now, crypto_akcipher_maxsize() can not be reached without successfully setting the key for the transformation. akcipher algorithm implementations check if the key was set and then return the output buffer size required for the given key. Change the return type to unsigned int and always assume that this function is called after a successful setkey of the transformation. akcipher algorithm implementations will remove the check if key is not NULL and directly return the max size. Signed-off-by: Tudor Ambarus Signed-off-by: Herbert Xu

crypto: kpp - assume key is already set in maxsize

2017-06-10T04:04:27Z

As of now, crypto_kpp_maxsize() can not be reached without successfully setting the key for the transformation. kpp algorithm implementations check if the key was set and then return the output buffer size required for the given key. Change the return type to unsigned int and always assume that this function is called after a successful setkey of the transformation. kpp algorithm implementations will remove the check if key is not NULL and directly return the max size. Signed-off-by: Tudor Ambarus Signed-off-by: Herbert Xu