linux/include/dt-bindings/clock, branch v3.18

clk: qcom: Fix duplicate rbcpr clock name

2014-11-17T18:40:42Z

There is a duplication in a clock name for apq8084 platform that causes the following warning: "RBCPR_CLK_SRC" redefined Resolve this by adding a MMSS_ prefix to this clock and making its name coherent with msm8974 platform. Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support") Signed-off-by: Georgi Djakov Reviewed-by: Stephen Boyd Signed-off-by: Michael Turquette

ARM: imx: clk-vf610: define PLL's clock tree

2014-11-04T05:40:14Z

So far, the required PLL's (PLL1/PLL2/PLL5) have been initialized by boot loader and the kernel code defined fixed rates according to those default configurations. Beginning with the USB PLL7 the code started to initialize the PLL's itself (using imx_clk_pllv3). However, since commit dc4805c2e78ba5a22ea1632f3e3e4ee601a1743b (ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver) imx_clk_pllv3 no longer takes care of the ENABLE and BYPASS bits, hence the USB PLL were not configured correctly anymore. This patch not only fixes those USB PLL's, but also makes use of the imx_clk_pllv3 for all PLL's and alignes the code with the PLL support of the i.MX6 series. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo

ARM: i.MX6: Fix "emi" clock name typo

2014-10-25T12:01:09Z

Fix a typo error, the "emi" names refer to the eim clocks. The change fixes typo in EIM and EIM_SLOW pre-output dividers and selectors clock names. Notably EIM_SLOW clock itself is named correctly. Signed-off-by: Steve Longerbeam [vladimir_zapolskiy@mentor.com: ported to v3.17] Signed-off-by: Vladimir Zapolskiy Cc: Sascha Hauer Signed-off-by: Shawn Guo

Merge tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux

2014-10-15T05:05:03Z

Pull clock tree updates from Mike Turquette: "The clk tree changes for 3.18 are dominated by clock drivers. Mostly fixes and enhancements to existing drivers as well as new drivers. This tag contains a bit more arch code than I usually take due to some OMAP2+ changes. Additionally it contains the restart notifier handlers which are merged as a dependency into several trees. The PXA changes are the only messy part. Due to having a stable tree I had to revert one patch and follow up with one more fix near the tip of this tag. Some dead code is introduced but it will soon become live code after 3.18-rc1 is released as the rest of the PXA family is converted over to the common clock framework. Another trend in this tag is that multiple vendors have started to push the complexity of changing their CPU frequency into the clock driver, whereas this used to be done in CPUfreq drivers. Changes to the clk core include a generic gpio-clock type and a clk_set_phase() function added to the top-level clk.h api. Due to some confusion on the fbdev mailing list the kernel boot parameters documentation was updated to further explain the clk_ignore_unused parameter, which is often required by users of the simplefb driver. Finally some fixes to the locking around the clock debugfs stuff was done to prevent deadlocks when interacting with other subsystems." * tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits) clk: pxa clocks build system fix Revert "arm: pxa: Transition pxa27x to clk framework" clk: samsung: register restart handlers for s3c2412 and s3c2443 clk: rockchip: add restart handler clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate doc/kernel-parameters.txt: clarify clk_ignore_unused arm: pxa: Transition pxa27x to clk framework dts: add devicetree bindings for pxa27x clocks clk: add pxa27x clock drivers arm: pxa: add clock pll selection bits clk: dts: document pxa clock binding clk: add pxa clocks infrastructure clk: gpio-gate: Ensure gpiod_ APIs are prototyped clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe clk: ti: LLVMLinux: Move __init outside of type definition clk: ti: consider the fact that of_clk_get() might return an error clk: ti: dra7-atl-clock: fix a memory leak clk: ti: change clock init to use generic of_clk_init clk: hix5hd2: add I2C clocks clk: hix5hd2: add watchdog0 clocks ...

Merge tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2014-10-15T04:58:16Z

Pull MFD updates from Lee Jones: "Changes to existing drivers: - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030 - Export symbols for use in modules in max14577 - Plenty of static code analysis/Coccinelle fixes throughout the SS - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808 - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr - IRQ fixups in arizona, stmpe, max14577 - Regulator related changes in axp20x - Pass DMA coherency information from parent => child in MFD core - Rename DT document files for consistency - Add ACPI support to the MFD core - Add Andreas Werner to MAINTAINERS for MEN F21BMC New drivers/supported devices: - New driver for MEN 14F021P00 Board Management Controller - New driver for Ricoh RN5T618 PMIC - New driver for Rockchip RK808 - New driver for HiSilicon Hi6421 PMIC - New driver for Qualcomm SPMI PMICs - Add support for Intel Braswell in lpc_ich - Add support for Intel 9 Series PCH in lpc_ich - Add support for Intel Quark ILB in lpc_sch" [ Delayed to after the poweer/reset pull due to Kconfig problems with recursive Kconfig select/depends-on chains. - Linus ] * tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) mfd: cros_ec: wait for completion of commands that return IN_PROGRESS i2c: i2c-cros-ec-tunnel: Set retries to 3 mfd: cros_ec: move locking into cros_ec_cmd_xfer mfd: cros_ec: stop calling ->cmd_xfer() directly mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC mfd: arizona: Correct mask to allow setting micbias external cap mfd: Add ACPI support Revert "mfd: wm5102: Manually apply register patch" mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention mfd: Inherit coherent_dma_mask from parent device mfd: Document DT bindings for Qualcomm SPMI PMICs mfd: Add support for Qualcomm SPMI PMICs mfd: dt-bindings: pm8xxx: Add new compatible string mfd: axp209x: Drop the parent supplies field mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off mfd: dt-bindings: twl4030-power: Use the standard property to mark power control mfd: syscon: Add Atmel GPBR DT bindings documention ...

Merge branch 'clk-pxa27x' into clk-next

2014-09-30T19:49:42Z

clk: add pxa clocks infrastructure

2014-09-30T19:31:30Z

Add a the common code used by all PXA variants. This is the first step in the transition from architecture defined clocks (in arch/arm/mach-pxa) towards clock framework. The goal is to have the same features (and not all the features) of the existing clocks, and enable the transition of PXA to device-tree. All PXA rely on a "CKEN" type clock, which : - has a gate (bit in CKEN register) - is generated from a PLL, generally divided - has an alternate low power clock Each variant will specialize the CKEN clock : - pxa25x have no low power clock - pxa27x in low power use always the 13 MHz ring oscillator - pxa3xx in low power have specific dividers for each clock The device-tree provides a list of CLK_* (ex: CLK_USB or CLK_I2C) to get a handle on the clock. While pxa-clock.h will describe all the clocks of all the variants, each variant will only use a subset of it. Signed-off-by: Robert Jarzmik Signed-off-by: Mike Turquette

Merge tag 'for_3.18/samsung-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next

2014-09-30T06:43:12Z

Samsung clock patches for v3.18 1) non-critical fixes (without the need to push to stable) fa0111be4ff3 clk: samsung: exynos4: remove duplicate div_core2 divider clock instantiation b511593d7165 clk: samsung: exynos4: fix g3d clocks c14254300131 clk: samsung: exynos4: add missing smmu_g2d clock and update comments 22842d244af3 clk: samsung: exynos5260: fix typo in clock name e82ba578ccde clk: samsung: exynos3250: fix width field of mout_mmc0/1 59037b92f440 clk: samsung: exynos3250: fix width and shift of div_spi0_isp clock 5ce37f266650 clk: samsung: exynos3250: fix mout_cam_blk parent list 2) Clock driver extensions 07ccf02ba5c3 dt-bindings: clk: samsung: Document the DMC domain of Exynos3250 CMU d0e73eaf1925 ARM: dts: exynos3250: Add CMU node for DMC domain clocks e3c3f19bc618 clk: samsung: exynos3250: Register DMC clk provider 4676f0aab9dc clk: samsung: exynos4: add support for MOUT_HDMI and MOUT_MIXER clocks

Merge tag 'hix5hd2-clock-for-3.18-v2' of git://github.com/hisilicon/linux-hisi into clk-next

2014-09-28T17:47:15Z

Hisilicon HiX5HD2 clock updates for 3.18-v2 - Add I2C clocks - Add watchdog clocks - Add sd clocks - Add complex clock implementation to support sata, usb and ethernet

clk: hix5hd2: add I2C clocks

2014-09-28T02:27:09Z

hix5hd2 add I2C clocks (I2C0~i2C5) Signed-off-by: Wei Yan Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu