linux/include/dt-bindings/clock, branch v5.6

clk: imx8mn: Fix incorrect clock defines

2020-02-17T07:18:00Z

IMX8MN_CLK_I2C4 and IMX8MN_CLK_UART1's index definitions are incorrect, fix them. Fixes: 1e80936a42e1 ("dt-bindings: imx: Add clock binding doc for i.MX8MN") Signed-off-by: Anson Huang Signed-off-by: Shawn Guo

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T22:17:27Z

Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T21:58:44Z

Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...

Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', 'clk-freescale' and 'clk-qoriq' into clk-next

2020-01-31T21:14:26Z

- Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings

Merge branches 'clk-debugfs-danger', 'clk-basic-hw', 'clk-renesas', 'clk-amlogic' and 'clk-allwinner' into clk-next

2020-01-31T21:12:14Z

- Support dangerous debugfs actions on clks with dead code - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs * clk-debugfs-danger: clk: Add support for setting clk_rate via debugfs * clk-basic-hw: clk: divider: Add support for specifying parents via DT/pointers clk: gate: Add support for specifying parents via DT/pointers clk: mux: Add support for specifying parents via DT/pointers clk: asm9260: Use parent accuracy in fixed rate clk clk: fixed-rate: Document that accuracy isn't a rate clk: fixed-rate: Add clk flags for parent accuracy clk: fixed-rate: Add support for specifying parents via DT/pointers clk: fixed-rate: Document accuracy member clk: fixed-rate: Move to_clk_fixed_rate() to C file clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy() clk: fixed-rate: Convert to clk_hw based APIs clk: gpio: Use DT way of specifying parents * clk-renesas: clk: renesas: Prepare for split of R-Car H3 config symbol dt-bindings: clock: renesas: cpg-mssr: Fix r8a774b1 typo clk: renesas: r7s9210: Add SPIBSC clock clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks clk: renesas: Remove use of ARCH_R8A7796 clk: renesas: rcar-gen2: Change multipliers and dividers to u8 * clk-amlogic: clk: clarify that clk_set_rate() does updates from top to bottom clk: meson: meson8b: make the CCF use the glitch-free mali mux clk: meson: pll: Fix by 0 division in __pll_params_to_rate() clk: meson: g12a: fix missing uart2 in regmap table clk: meson: meson8b: use of_clk_hw_register to register the clocks clk: meson: meson8b: don't register the XTAL clock when provided via OF clk: meson: meson8b: change references to the XTAL clock to use [fw_]name clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding * clk-allwinner: clk: sunxi: a23/a33: Export the MIPI PLL clk: sunxi: a31: Export the MIPI PLL clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock clk: sunxi-ng: r40: Export MBUS clock clk: sunxi: use of_device_get_match_data

dt-bindings: clock: Add bindings for versal clock driver

2020-01-23T21:21:50Z

Add documentation to describe Xilinx Versal clock driver bindings. Signed-off-by: Rajan Vaja Reviewed-by: Rob Herring Link: https://lkml.kernel.org/r/1575527759-26452-2-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd

ARM: dts: Add missing omap5 secure clocks

2020-01-23T16:22:57Z

The secure clocks on omap5 are similar to what we already have for dra7 with dra7_l4sec_clkctrl_regs and documented in the omap5432 TRM in "Table 3-1044. CORE_CM_CORE Registers Mapping Summary". The secure clocks are part of the l4per clock manager. As the l4per clock manager has now two clock domains as children, let's also update the l4per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Compared to omap4, omap5 has more clocks working in hardare autogating mode. Cc: devicetree@vger.kernel.org Cc: Rob Herring Acked-by: Stephen Boyd Signed-off-by: Tony Lindgren

ARM: dts: Add missing omap4 secure clocks

2020-01-23T16:20:17Z

The secure clocks on omap4 are similar to what we already have for dra7 in dra7_l4sec_clkctrl_regs and documented in the omap4460 TRM "Table 3-1346 L4PER_CM2 Registers Mapping Summary". The secure clocks are part of the l4_per clock manager. As the l4_per clock manager has now two clock domains as children, let's also update the l4_per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Cc: devicetree@vger.kernel.org Cc: Rob Herring Acked-by: Stephen Boyd Signed-off-by: Tony Lindgren

clk: ti: add clkctrl data dra7 sgx

2020-01-20T07:43:44Z

This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately. Cc: Benoit Parrot Cc: "H. Nikolaus Schaller" Cc: Robert Nelson Cc: Tomi Valkeinen Signed-off-by: Tony Lindgren Acked-by: Stephen Boyd Signed-off-by: Tero Kristo

clk: ti: omap5: Add missing AESS clock

2020-01-20T07:42:48Z

Looks like we're missing AESS clock for omap5. This is similar to what omap4 has. Cc: H. Nikolaus Schaller Cc: Matthijs van Duin Cc: Peter Ujfalusi Signed-off-by: Tony Lindgren Reviewed-by: Peter Ujfalusi Signed-off-by: Tero Kristo