linux/include/dt-bindings/clock, branch v6.0

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2022-08-05T01:40:08Z

Pull clk updates from Stephen Boyd: "The clk core gains a new set of APIs that allow drivers to both acquire clks and prepare and enable them at the same time. This also comes with devm support so that drivers can make a single call to get and prepare and enable the clk and have that all undone when their driver is removed. Many folks have requested this feature over the years, but we've had disagreements about how to implement it and if it was worthwhile to encourage drivers to use such an API. Now it's here, so let's see how it goes. I hope that by introducing this API we can identify drivers that would benefit from further consolidation of clk API usage, possibly by moving such logic to the bus layer and out of drivers altogether. Outside of that major API update, we have the usual collection of driver updates. A few new SoCs are supported, mostly Qualcomm and Renesas this time around. Then we have the long tail of non-critical fixes and minor feature additions to various clk drivers. And finally more clk provider migration to struct clk_parent_data, reducing boot times in the process. Summary: Core: - devm helpers for clk_get() + clk_prepare() and clk_enable() New Drivers: - Support for the camera clock controller in Qualcomm SM8450 and the display and gpu clock controllers in Qualcomm SM8350 - Add support for the Renesas RZ/Five SoC Updates: - Various fixes, new clocks and USB GDSCs are introduced for Qualcomm IPQ8074 - Fixes to Qualcomm MSM8939 for issues introduced by inheriting the MSM8916 GCC driver - Support for a new type of voteable GDSCs used by Qualcomm SC8280XP PCIe GDSCs - Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux implementation - Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994 GCC are migrated to use clk_parent_data - Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845 and SM8250 - Qualcomm MSM8916 gains more possible frequencies for its GP clocks. - The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic the design in IPQ8074 to allow the GCC driver to probe earlier. - The regulator based mmcx supply for Qualcomm dispcc and videocc is dropped, as the only upstream target that adapted this interface was transitioned several kernel versions ago - Qualcomm GDSCs found to be enabled at boot will now reflect in the enable count of the supply, as was done with the regulator supplies previously - Correct adc1, nic_media and edma1's parents for NXP i.MX93 - rdiv, mfd values, the return rate in recalc_rate and add more frequencies in the table for fracn-gppll on i.MX - Remove Allwinner workaround logic/compatible in fixed factor code - MediaTek clk driver cleanups - Add reset support to more MediaTek clk drivers - deduplicate Allwinner ccu_clks arrays - Allwinner H6 GPU DFS support - Adjust Allwinner Kconfig to limit choice - Fix initconst confusion on Renesas R-Car Gen4 - Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L - Add PFC and WDT clocks and resets on Renesas RZ/V2M - Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on Renesas R-Car S4-8" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits) clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw() clk: mux: Introduce devm_clk_hw_register_mux_parent_hws() clk: divider: Introduce devm_clk_hw_register_divider_parent_hw() clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 clk: qcom: clk-rpm: convert to parent_data API dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled clk: qcom: Drop mmcx gdsc supply for dispcc and videocc clk: qcom: fix build error initializer element is not constant clk: sprd: Add dt-bindings include file for UMS512 dt-bindings: clk: sprd: Add bindings for ums512 clock controller clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources clk: qcom: add support for SM8350 DISPCC ...

Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-08-05T01:08:34Z

Pull devicetree updates from Rob Herring: "Bindings: - Add spi-peripheral-props.yaml references to various SPI device bindings - Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x, skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and arm-firmware-suite bindings to DT schema format - New bindings for Arm virtual platforms display, Qualcomm IMEM memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027 RTC, and arm,cortex-a78ae - Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec, quanta, and densitron - Add missing MSI and IOMMU properties to host-generic-pci - Remove bindings for removed EFM32 platform - Remove old chosen.txt binding (replaced by schema) - Treewide add missing type information for properties - Treewide fixing of typos and its vs. it's in bindings. Its all good now. - Drop unnecessary quoting in power related schemas - Several LED binding updates which didn't get picked up - Move various bindings to proper directories DT core code: - Convert unittest GPIO related tests to use fwnode - Check ima-kexec-buffer against memory bounds - Print reserved-memory allocation/reservation failures as errors - Cleanup early_init_dt_reserve_memory_arch() - Simplify of_overlay_fdt_apply() tail" * tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits) dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml dt-bindings: power: supply: drop quotes when not needed dt-bindings: power: reset: drop quotes when not needed dt-bindings: power: drop quotes when not needed dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties of/fdt: declared return type does not match actual return type devicetree/bindings: correct possessive "its" typos dt-bindings: net: convert emac_rockchip.txt to YAML dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory dt-bindings: eeprom: at25: use spi-peripheral-props.yaml dt-bindings: display: use spi-peripheral-props.yaml dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema dt-bindings: power: reset: qcom,pon: use absolute path to other schema dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts' dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat' dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode' of/fdt: Clean up early_init_dt_reserve_memory_arch() dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high' dt-bindings: rtc: Add EM Microelectronic EM3027 bindings dt-bindings: rtc: ds1307: Convert to json-schema ...

Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2022-08-04T19:12:54Z

Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...

Merge branches 'clk-renesas', 'clk-spreadtrum', 'clk-imx' and 'clk-qcom' into clk-next

2022-08-02T19:20:33Z

* clk-renesas: (22 commits) clk: renesas: rcar-gen4: Fix initconst confusion for cpg_pll_config clk: renesas: r9a07g043: Add support for RZ/Five SoC dt-bindings: clock: r9a07g043-cpg: Add Renesas RZ/Five CPG Clock and Reset Definitions clk: renesas: r8a779f0: Add HSCIF clocks clk: renesas: r8a779f0: Add PCIe clocks clk: renesas: r8a779f0: Add Z0 and Z1 clock support dt-bindings: clock: renesas,rzg2l: Simplify header file references clk: renesas: rza1: Remove struct rz_cpg clk: renesas: r8a7779: Remove struct r8a7779_cpg clk: renesas: r8a7778: Remove struct r8a7778_cpg clk: renesas: sh73a0: Remove sh73a0_cpg.reg clk: renesas: r8a7740: Remove r8a7740_cpg.reg clk: renesas: r8a73a4: Remove r8a73a4_cpg.reg clk: renesas: r8a779f0: Add SDHI0 clock clk: renesas: r8a779f0: Add thermal clock clk: renesas: rzg2l: Fix reset status function clk: renesas: r9a06g032: Fix UART clkgrp bitsel clk: renesas: r9a06g032: Drop some unused fields clk: renesas: r9a09g011: Add WDT clock and reset entries clk: renesas: r9a09g011: Add PFC clock and reset entries ... * clk-spreadtrum: clk: sprd: Add dt-bindings include file for UMS512 dt-bindings: clk: sprd: Add bindings for ums512 clock controller * clk-imx: clk: imx: clk-fracn-gppll: Add more freq config for video pll clk: imx: clk-fracn-gppll: correct rdiv clk: imx: clk-fracn-gppll: Return rate in rate table properly in ->recalc_rate() clk: imx: clk-fracn-gppll: fix mfd value clk: imx93: Correct the edma1's parent clock clk: imx93: correct nic_media parent clk: imx93: use adc_root as the parent clock of adc1 * clk-qcom: (62 commits) clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 clk: qcom: clk-rpm: convert to parent_data API dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled clk: qcom: Drop mmcx gdsc supply for dispcc and videocc clk: qcom: fix build error initializer element is not constant dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources clk: qcom: add support for SM8350 DISPCC clk: qcom: add support for SM8350 GPUCC clk: qcom: add camera clock controller driver for SM8450 SoC clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfaces clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed code clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure description ...

Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-08-02T15:29:18Z

Pull ARM new SoC support from Arnd Bergmann: "This adds initial support for two SoC families that have been under review for a while. In both cases, the origonal idea was to have a minimally functional version, but we ended up leaving out the clk drivers that are still under review and will be merged through the corresponding subsystem tree. The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and based on the 32-bit NPCM7xx family but is now getting added to arch/arm64 as well. Sunplus SP7021, also known as Plus1, is a general-purpose System-in-Package design based on the 32-bit Cortex-A7 SoC on the main chip, plus an I/O chip and memory in the same" * tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE arm64: defconfig: Add Nuvoton NPCM family support arm64: dts: nuvoton: Add initial NPCM845 EVB device tree arm64: dts: nuvoton: Add initial NPCM8XX device tree arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string dt-bindings: arm: npcm: Add maintainer reset: npcm: Add NPCM8XX support dt-bindings: reset: npcm: Add support for NPCM8XX reset: npcm: using syscon instead of device data ARM: dts: nuvoton: add reset syscon property dt-bindings: reset: npcm: add GCR syscon property dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock dt-bindings: watchdog: npcm: Add npcm845 compatible string dt-bindings: timer: npcm: Add npcm845 compatible string ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig ARM: sunplus: Add initial support for Sunplus SP7021 SoC irqchip: Add Sunplus SP7021 interrupt controller driver ...

Merge branch 'nuvoton/newsoc' into arm/newsoc

2022-07-19T13:42:00Z

Merge the new SoC support from Tomer Maimon: "This patchset adds initial support for the Nuvoton Arbel NPCM8XX Board Management controller (BMC) SoC family. The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC. The NPCM8XX computing subsystem comprises a quadcore ARM Cortex A35 ARM-V8 architecture. This patchset adds minimal architecture and drivers such as: Clocksource, Clock, Reset, and WD. Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX. This patchset was tested on the Arbel NPCM8XX evaluation board." I'm leaving out the clk controller driver, which is still under review. * nuvoton/newsoc: arm64: defconfig: Add Nuvoton NPCM family support arm64: dts: nuvoton: Add initial NPCM845 EVB device tree arm64: dts: nuvoton: Add initial NPCM8XX device tree arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string dt-bindings: arm: npcm: Add maintainer reset: npcm: Add NPCM8XX support dt-bindings: reset: npcm: Add support for NPCM8XX reset: npcm: using syscon instead of device data ARM: dts: nuvoton: add reset syscon property dt-bindings: reset: npcm: add GCR syscon property dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock dt-bindings: watchdog: npcm: Add npcm845 compatible string dt-bindings: timer: npcm: Add npcm845 compatible string

dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock

2022-07-19T13:39:50Z

Add binding for the Arbel BMC NPCM8XX Clock controller. Signed-off-by: Tomer Maimon Reviewed-by: Krzysztof Kozlowski Acked-by: Stephen Boyd Signed-off-by: Arnd Bergmann

Merge tag 'qcom-arm64-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

2022-07-14T15:02:12Z

Qualcomm ARM64 DTS updates for v5.20 This introduces initial support for Lenovo ThinkPad X13s, Qualcomm 8cx Gen 3 Compute Reference Device, SA8295P Automotive Development Platform, Xiaomi Mi 5s Plus, five new SC7180 Chrome OS boards, Inforce IFC6560, LG G7 ThinQ and LG V35 ThinQ. With IPQ8074 gaining GDSC support, this was expressed in the gcc node and defined for the USB nodes. The SDHCI reset line was defined to get the storage devices into a known state. For MSM8996 interconnect providers, the second DSI interface, resets for SDHCI are introduced. Support for the Xiaomi Mi 5s Plus is introduced and the Dragonboard 820c gains definitions for its LEDs. The MSM8998 platform changes consists of a various cleanup patches, the FxTec Pro1 is split out from using the MTP dts and Sony Xperia devices on the "Yoshino" platform gains ToF sensor. On SC7180 five new Trogdor based boards are added and the description of keyboard and detachables is improved. On the SC7280-based Herobrine board DisplayPort is enabled, SPI flash clock rate is changed, WiFi is enabled and the modem firmware path is updated. The Villager boards gains touchscreen, and keyboard backlight. This introduces initial support for the SC8280XP (aka 8cx Gen 3) and related automotive platforms are introduced, with support for the Qualcomm reference board, the Lenovo Thinkpad X13s and the SA8295P Automotive Development Platform. In addition to a wide range of smaller fixes on the SDM630 and SDM660 platforms, support for the secondary high speed USB controller is introduced and the Sony Xperia "Nile" platform gains support for the RGB status LED. Support for the Inforce IFC6560 board is introduced. On SDM845 the bandwidth monitor for the CPU subsystem is introduced, to scale LLCC clock rate based on profiling. CPU and cluster idle states are switched to OSI hierarchical states. DB845c and SHIFT 6mq gains LED support and new support for the LG G7 ThinQ and LG V35 ThinQ boards are added. DLL/DDR configuration for SDHCI nodes are defined for SM6125. On SM8250 the GPU per-process page tables is enabled and for RB5 the Light Pulse Generator-based LEDs are added. The display clock controller is introduced for SM8350. On SM8450 this introduces the camera clock controller and the UART typically used for Bluetooth. The interconnect path for the crypto engine is added to the SCM node, to ensure this is adequately clocked. The assigned-clock-rate for the display processor is dropped from several platforms, now that the driver derrives the min and max from the clock. In addition to this a wide range of fixes for stylistic issues and issues discovered through Devicetree binding validation across many platforms and boards are introduced. * tag 'qcom-arm64-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (193 commits) arm64: dts: qcom: sc8280xp: fix DP PHY node unit addresses arm64: dts: qcom: sc8280xp: fix usb_0 HS PHY ref clock arm64: dts: qcom: sc7280: fix PCIe clock reference docs: arm: index.rst: add google/chromebook-boot-flow arm64: dts: qcom: msm8996: clean up PCIe PHY node arm64: dts: qcom: msm8996: use non-empty ranges for PCIe PHYs arm64: dts: qcom: sm8450: drop UFS PHY clock-cells arm64: dts: qcom: sm8250: drop UFS PHY clock-cells arm64: dts: qcom: sc8280xp: drop UFS PHY clock-cells arm64: dts: qcom: sm8450: drop USB PHY clock index arm64: dts: qcom: sm8350: drop USB PHY clock index arm64: dts: qcom: msm8998: drop USB PHY clock index arm64: dts: qcom: ipq8074: drop USB PHY clock index arm64: dts: qcom: ipq6018: drop USB PHY clock index arm64: dts: qcom: sm8250: add missing PCIe PHY clock-cells arm64: dts: qcom: sc7280: drop PCIe PHY clock index Revert "arm64: dts: qcom: Fix 'reg-names' for sdhci nodes" arm64: dts: qcom: sc7180-idp: add vdds supply to the DSI PHY arm64: dts: qcom: sc7280: use constants for gpucc clocks and power-domains arm64: dts: qcom: msm8996: add missing DSI clock assignments ... Link: https://lore.kernel.org/r/20220713203939.1431054-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann

clk: sprd: Add dt-bindings include file for UMS512

2022-07-11T19:59:19Z

This file defines all UMS512 clock indexes, it should be included in the device tree in which there's device using the clocks. Signed-off-by: Cixi Geng Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220505101433.1575096-4-gengcixi@gmail.com Signed-off-by: Stephen Boyd

Merge tag 'tegra-for-5.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

2022-07-11T15:36:17Z

dt-bindings: Changes for v5.20-rc1 These changes add clock, reset, memory client and power domain definitions for various devices found on Tegra234 along with a few device tree bindings for new hardware. * tag 'tegra-for-5.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: tegra-ccplex-cluster: Remove status from required properties dt-bindings: Add headers for Host1x and VIC on Tegra234 dt-bindings: timer: Add Tegra186 & Tegra234 Timer dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB 2.0 binding dt-bindings: arm: tegra: Add NVIDIA Tegra194 AXI2APB binding dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB 1.0 binding dt-bindings: memory: Add Tegra234 MGBE memory clients dt-bindings: Add Tegra234 MGBE clocks and resets dt-bindings: power: Add Tegra234 MGBE power domains dt-bindings: Add headers for Tegra234 GPCDMA Link: https://lore.kernel.org/r/20220708185608.676474-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann