linux/include/dt-bindings/clock, branch v6.3

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2023-02-25T23:16:23Z

Pull clk updates from Stephen Boyd: "We have one small patch to the clk core this time around. It fixes a corner case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled() where it hangs the system. We'll simply assume the clk is disabled if the parent is disabled and the flag is set. Trying to turn on the parent to check the enable state of the clk runs into system hangs at boot. We let this bake in -next for a couple weeks to make sure there aren't any more issues because the last attempt to fix this ran into hangs and had to be reverted. Note: There were some more patches to the core framework around sync_state and disabling unused clks, but I asked for that to be reverted from the qcom PR because it isn't ready and we're still discussing the best solution on the list. Outside of the core clk framework, we have the usual collection of clk driver updates and support for new SoCs (which seems to never stop). The dirstat is dominated by Qualcomm because they added support for quite a few SoCs this time around and also migrated quite a few of their drivers to clk_parent_data. The other big diff is in the Mediatek clk drivers that saw a significant rework this cycle to similarly modernize the code, and we'll see that work continue in the next cycle as well. Nothing really jumps out as scary here, except that the significant churn in parent data descriptions can have typos that go unnoticed. More details below. Core: - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() New Drivers: - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref clocks - Support for Mediatek MT7891 SoC clks - Support for many Qualcomm clk controllers: - QDU1000/QRU1000 global clock controller - SA8775P global clock controller - SM8550 TCSR and display clock controller - SM6350 clock controller - MSM8996 CBF and APCS clock controllers Updates: - Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Versa 5P49V60 clks - Disable R-Car H3 ES1.*, as it was only available to an internal development group and needed a lot of quirks and workarounds - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and resets on Renesas RZ/V2M - Add display clocks on Renesas R-Car V4H - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L - Free the imx_uart_clocks even if imx_register_uart_clocks returns early - Get the stdout clocks count from device tree on i.MX - Drop the clock count argument from imx_register_uart_clocks() - Keep the uart clocks on i.MX93 for when earlycon is used - Fix SPDX comment in i.MX6SLL clocks bindings header - Drop some unnecessary spaces from i.MX8ULP clocks bindings header - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is not configured via devicetree - Fix the ENET1 gate configuration for i.MX6UL according to the reference manual - Add ENET refclock mux support for i.MX6UL - Add support for USB host/device configuration on Renesas RZ/N1 - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H - Add D1 CAN bus gates and resets for Allwinner - Mark D1 CPUX clock as critical on Allwinner - Reuse D1 driver for Allwinner R528/T113 - Cleanup sunxi-ng Kconfig - Fix sunxi-ng kernel-doc issues - Model Allwinner H3/H5 DRAM clock as fixed clock - Use .determine_rate() instead of .round_rate() for the dualdiv, mpll, sclk-div and cpu-dyn-div amlogic clock drivers - DDR clocks were marked as critical in the proper clock driver for each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted in the next releases as it only does clock enablement - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of them may use it - Support synchronous power_off requests in the qcom GDSC driver for proper GPU power collapse - Drop test clocks from various Qualcomm clk drivers - Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers - Fixes for the Qualcomm MSM8996 CPU clock controller - Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk - Add GDSCs in the global clock controller for Qualcomm QCS404 - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are moved to use the recently introduced properties in the GDSC struct - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock is added on a variety of platforms - De-duplicate identical clks in Qualcomm SMD RPM clk driver - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to Qualcomm SDM RPM clk driver - Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused clk: imx: pll14xx: fix recalc_rate for negative kdiv clk: rs9: Drop unused pin_xin field MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: sprd: Add dependency for SPRD_UMS512_CLK clk: ralink: fix 'mt7621_gate_is_enabled()' function clk: mediatek: clk-mtk: Remove unneeded semicolon dt-bindings: clock: remove stih416 bindings dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file clk: imx: fix compile testing imxrt1050 clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: renesas: rcar-gen3: Disable R-Car H3 ES1.* dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include ...

Merge branches 'clk-loongson' and 'clk-qcom' into clk-next

2023-02-23T19:04:25Z

* clk-loongson: dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file * clk-qcom: (143 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include clk: qcom: gcc-sa8775p: remove unused variables clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform clk: qcom: add msm8996 Core Bus Framework (CBF) support dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller clk: qcom: add the driver for the MSM8996 APCS clocks clk: qcom: gcc-qcs404: fix duplicate initializer warning clk: qcom: cpu-8996: change setup sequence to follow vendor kernel clk: qcom: cpu-8996: fix PLL clock ops clk: qcom: cpu-8996: fix ACD initialization clk: qcom: cpu-8996: fix PLL configuration sequence clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call clk: qcom: cpu-8996: setup PLLs before registering clocks clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb ...

Merge branches 'clk-microchip', 'clk-allwinner', 'clk-mediatek', 'clk-imx' and 'clk-core' into clk-next

2023-02-23T19:04:12Z

- Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Mediatek MT7891 SoC clks * clk-microchip: clk: at91: do not compile dt-compat.c for sama7g5 and sam9x60 clk: at91: mark ddr clocks as critical * clk-allwinner: clk: sunxi-ng: d1: Add CAN bus gates and resets dt-bindings: clock: Add D1 CAN bus gates and resets clk: sunxi-ng: d1: Mark cpux clock as critical clk: sunxi-ng: d1: Allow building for R528/T113 clk: sunxi-ng: Move SoC driver conditions to dependencies clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies clk: sunxi-ng: Avoid computing the rate twice clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock clk: sunxi-ng: fix ccu_mmc_timing.c kernel-doc issues * clk-mediatek: (29 commits) clk: mediatek: clk-mtk: Remove unneeded semicolon clk: mediatek: remove MT8195 vppsys/0/1 simple_probe dt-bindings: arm: mediatek: migrate MT8195 vppsys0/1 to mtk-mmsys driver clk: mediatek: add MT7981 clock support dt-bindings: clock: mediatek: add mt7981 clock IDs dt-bindings: clock: Add compatibles for MT7981 clk: mediatek: clk-mt7986-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt7986-topckgen: Properly keep some clocks enabled clk: mediatek: clk-mt6795-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt8186-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt8192: Migrate topckgen to mtk_clk_simple_probe() clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe() clk: mediatek: clk-mt8183: Join top_aud_muxes and top_aud_divs clk: mediatek: mt8186: Join top_adj_div and top_muxes clk: mediatek: mt8192: Join top_adj_divs and top_muxes clk: mediatek: clk-mt8192: Move CLK_TOP_CSW_F26M_D2 in top_divs clk: mediatek: mt8173: Migrate pericfg/topckgen to mtk_clk_simple_probe() clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe() clk: mediatek: Switch to mtk_clk_simple_probe() where possible clk: mediatek: mt8173: Break down clock drivers and allow module build ... * clk-imx: clk: imx: pll14xx: fix recalc_rate for negative kdiv MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: imx: fix compile testing imxrt1050 clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: imx6ul: add ethernet refclock mux support clk: imx6ul: fix enet1 gate configuration clk: imx: add imx_obtain_fixed_of_clock() clk: imx6q: add ethernet refclock mux support clk: imx: add clk-gpr-mux driver dt-bindings: imx8ulp: clock: no spaces before tabs clk: imx6sll: add proper spdx license identifier clk: imx: imx93: invoke imx_register_uart_clocks clk: imx: remove clk_count of imx_register_uart_clocks clk: imx: get stdout clk count from device tree clk: imx: avoid memory leak * clk-core: clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()

Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-02-20T23:49:56Z

Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in device support for existing machines and adding minor cleanups, mostly for Qualcomm and Samsung based machines. Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from Rockchips that have been around for a while but were lacking kernel support so far: RV1126 is a Vision SoC with an NPU and is used in the Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for TV boxes and so far only comes with a dts for its refernece design. The other 32-bit boards that were added are two ASpeed AST2600 based BMC boards, the Microchip sam9x60_curiosity development board (Armv5 based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53 and i.MX6ULL. On the RISC-V side, there are fewer patches, but a total of ten new single-board computers based on variations of the Allwinner D1/T113 chip, plus one more board based on Microchip Polarfire. As usual, arm64 has by far the most changes here, with over 700 non-merge changesets, among them over 400 alone for Qualcomm. The newly added SoCs this time are all recent high-end embedded SoCs for various markets, each on comes with support for its reference board: - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones - Qualcomm QDU1000/QRU1000 5G RAN platform - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs - TI J784S4 for industrial and automotive applications In total, there are 46 new arm64 machines: - Reference platforms for each of the five new SoCs - Three Amlogic based development boards - Six embedded machines based on NXP i.MX8MM and i.MX8MP - The Mediatek mt7986a based Banana Pi R3 router - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865) - Two LTE dongles, also based on MSM8916 - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610), SDM450 and SDM632 - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c) - Nine development boards based on Rockchips RK3588, RK3568, RK3566 and RK3328. - Five development machines based on TI K3 (AM642/AM654/AM68/AM69) The cleanup of dtc warnings continues across all platforms, adding to the total number of changes" * tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits) dt-bindings: riscv: correct starfive visionfive 2 compatibles ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings arm64: dts: qcom: qcs404: align RPM G-Link node with bindings arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam arm64: dts: qcom: sc7280: Adjust zombie PWM frequency arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses arm64: dts: qcom: sm7225-fairphone-fp4: move status property down arm64: dts: qcom: pmk8350: Use the correct PON compatible arm64: dts: qcom: sc8280xp-x13s: Enable external display arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks arm64: dts: qcom: sm8350-hdk: enable GPU arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes arm64: dts: qcom: sm8350: finish reordering nodes arm64: dts: qcom: sm8350: move more nodes to correct place arm64: dts: qcom: sm8350: reorder device nodes ...

dt-bindings: clock: remove stih416 bindings

2023-02-10T23:47:13Z

Remove the stih416 clock dt-bindings since this platform is no more supported. Signed-off-by: Alain Volmat Link: https://lore.kernel.org/r/20230209091659.1409-11-avolmat@me.com Acked-by: Krzysztof Kozlowski Signed-off-by: Stephen Boyd

dt-bindings: clock: add loongson-2 clock include file

2023-02-10T23:32:28Z

This file defines all Loongson-2 SoC clock indexes, it should be included in the device tree in which there's device using the clocks. Signed-off-by: Yinbo Zhu Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221129034157.15036-1-zhuyinbo@loongson.cn Signed-off-by: Stephen Boyd

Merge branch '20221213152617.296426-1-konrad.dybcio@linaro.org' into HEAD

2023-02-09T04:09:15Z

Merge DT binding to gain Camera clock defines for SM6350

dt-bindings: clock: add QCOM SM6350 camera clock bindings

2023-02-09T04:08:21Z

Add device tree bindings for camera clock controller for Qualcomm Technology Inc's SM6350 SoC. Signed-off-by: Konrad Dybcio Signed-off-by: Konrad Dybcio Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org

Merge branch '20230112204446.30236-2-quic_molvera@quicinc.com' into arm64-for-6.3

2023-01-31T16:01:36Z

Merge DT binding in order to get GCC clock defines.

clk: imx6ul: add ethernet refclock mux support

2023-01-31T12:45:17Z

Add ethernet refclock mux support and set it to internal clock by default. This configuration will not affect existing boards. clock tree before this patch: fec1 <- enet1_ref_125m (gate) <- enet1_ref (divider) <-, |- pll6_enet fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´ after this patch: fec1 <- enet1_ref_sel(mux) <- enet1_ref_125m (gate) <- ... `--<> enet1_ref_pad |- pll6_enet fec2 <- enet2_ref_sel(mux) <- enet2_ref_125m (gate) <- ... `--<> enet2_ref_pad Signed-off-by: Oleksij Rempel Acked-by: Lee Jones Reviewed-by: Abel Vesa Signed-off-by: Abel Vesa Link: https://lore.kernel.org/r/20230131084642.709385-17-o.rempel@pengutronix.de