linux/include/dt-bindings/clock, branch v6.4

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2023-04-30T00:29:39Z

Pull clk updates from Stephen Boyd: "Nothing looks out of the ordinary in this batch of clk driver updates. There are a couple patches to the core clk framework, but they're all basically cleanups or debugging aids. The driver updates and new additions are dominated in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of new drivers for various SoCs, and MediaTek gained a bunch of drivers for MT8188. The MediaTek drivers are being modernized as well, so there are updates all over that vendor's clk drivers. There's also a couple other new clk drivers in here, for example the Starfive JH7110 SoC support is added. Outside of the two major SoC vendors though, we have the usual collection of non-critical fixes and cleanups to various clk drivers. It's good to see that we're getting more cleanups and modernization patches. Maybe one day we'll be able to properly split clk providers from clk consumers. Core: - Print an informational message before disabling unused clks New Drivers: - BCM63268 timer clock and reset controller - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Clk driver support for Loongson-2 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators - Initial Starfive JH7110 clk/reset support - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs Updates: - Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() - Convert platform clk drivers to remove_new() - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Reimplement Loongson-1 clk driver with DT support - Migrate socfpga clk driver to of_clk_add_hw_provider() - Support for i3c clks on Aspeed ast2600 SoCs - Add clock generic devm_clk_hw_register_gate_parent_data - Add audiomix block control for i.MX8MP - Add support for determine_rate to i.MX composite-8m - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate - Provide clock name in error message for clk-gpr-mux on get parent failure - Drop duplicate imx_clk_mux_flags macro - Register the i.MX8MP Media Disp2 Pix clock as bus clock - Add Media LDB root clock to i.MX8MP - Make i.MX8MP nand_usdhc_bus clock as non-critical - Fix the rate table for i.MX fracn-gppll - Disable HW control for the fracn-gppll in order to be controlled by register write - Add support for interger PLL in fracn-gppll - Add mcore_booted module parameter to i.MX93 provider - Add NIC, A55 and ARM PLL clocks to i.MX93 - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical - Update some of the i.MX critical clocks flags to allow glitchless on-the-fly rate change. - Add I2C5 clock on Renesas R-Car V3H - Exynos850: Add CMU_G3D clock controller for the Mali GPU - Extract Exynos5433 (ARM64) clock controller power management code to common driver parts - Exynos850: make PMU_ALIVE_PCLK clock critical - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H - Add video capture (VIN) clocks on Renesas R-Car V3H - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H - Support for Stromer Plus PLL on Qualcomm IPQ5332 - Add a missing reset to Qualcomm QCM2290 - Migrate Qualcomm IPQ4019 to clk_parent_data - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375, MSM8996 and MSM8998 SoCs - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk - Add two EMAC GDSCs on Qualcomm SC8280XP - Use shared rcg clk ops in Qualcomm SM6115 GCC - Park Qualcomm SM8350 PCIe PIPE clks when disabled - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller - Add missing XO clocks to Qualcomm MSM8226 and MSM8974 - Convert some Qualcomm clk DT bindings to YAML - Reparenting fix for the clock supplying camera modules on Rockchip rk3399 - Mark more critical (bus-)clocks on Rockchip rk3588" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: rockchip: rk3588: make gate linked clocks critical clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: starfive: Avoid casting iomem pointers clk: microchip: fix potential UAF in auxdev release callback clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: mediatek: fhctl: Mark local variables static clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` ...

Merge branch 'clk-imx' into clk-next

2023-04-25T18:52:39Z

* clk-imx: (25 commits) clk: imx: imx8ulp: update clk flag for system critical clock clk: imx: imx8ulp: Add tpm5 clock as critical gate clock clk: imx: imx8ulp: keep MU0_B clock enabled always clk: imx: imx8ulp: Add divider closest support to get more accurate clock rate clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents clk: imx: imx93: Add nic and A55 clk dt-bindings: clock: imx93: add NIC, A55 and ARM PLL CLK clk: imx: imx93: add mcore_booted module paratemter clk: imx: fracn-gppll: Add 300MHz freq support for imx9 clk: imx: fracn-gppll: support integer pll clk: imx: fracn-gppll: disable hardware select control clk: imx: fracn-gppll: fix the rate table clk: imx: imx8mp: change the 'nand_usdhc_bus' clock to non-critical clk: imx: imx8mp: Add LDB root clock dt-bindings: clock: imx8mp: Add LDB clock entry clk: imx: imx8mp: correct DISP2 pixel clock type clk: imx: drop duplicated macro clk: imx: clk-gpr-mux: Provide clock name in error message clk: imx: Let IMX8MN_CLK_DISP_PIXEL set parent rate clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate ...

Merge branches 'clk-of', 'clk-samsung', 'clk-rockchip' and 'clk-qcom' into clk-next

2023-04-25T18:52:25Z

* clk-of: clk: add missing of_node_put() in "assigned-clocks" property parsing * clk-samsung: clk: samsung: exynos850: Make PMU_ALIVE_PCLK critical clk: samsung: Convert to platform remove callback returning void clk: samsung: exynos5433: Extract PM support to common ARM64 layer clk: samsung: Extract parent clock enabling to common function clk: samsung: Extract clocks registration to common function clk: samsung: exynos850: Add AUD and HSI main gate clocks clk: samsung: exynos850: Implement CMU_G3D domain clk: samsung: clk-pll: Implement pll0818x PLL type clk: samsung: Set dev in samsung_clk_init() clk: samsung: Don't pass reg_base to samsung_clk_register_pll() clk: samsung: Remove np argument from samsung_clk_init() dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D * clk-rockchip: clk: rockchip: rk3588: make gate linked clocks critical clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent * clk-qcom: (57 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: qcom: Add Global Clock Controller driver for IPQ9574 dt-bindings: clock: Add ipq9574 clock and reset definitions clk: qcom: gpucc-sm6375: Configure CX_GDSC disable wait value clk: qcom: gcc-sm6115: Mark RCGs shared where applicable clk: qcom: dispcc-qcm2290: Add MDSS_CORE reset dt-bindings: clock: dispcc-qcm2290: Add MDSS_CORE reset clk: qcom: apss-ipq-pll: add support for IPQ5332 dt-bindings: clock: qcom,a53pll: add IPQ5332 compatible clk: qcom: apss-ipq-pll: refactor the driver to accommodate different PLL types dt-bindings: mailbox: qcom,apcs-kpss-global: fix SDX55 'if' match dt-bindings: mailbox: qcom,apcs-kpss-global: correct SDX55 clocks ...

Merge branches 'clk-starfive', 'clk-fractional' and 'clk-devmof' into clk-next

2023-04-25T18:50:49Z

- Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() * clk-starfive: clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: starfive: Avoid casting iomem pointers MAINTAINERS: generalise StarFive clk/reset entries reset: starfive: Add StarFive JH7110 reset driver clk: starfive: Add StarFive JH7110 always-on clock driver clk: starfive: Add StarFive JH7110 system clock driver reset: starfive: jh71x0: Use 32bit I/O on 32bit registers reset: starfive: Rename "jh7100" to "jh71x0" for the common code reset: starfive: Extract the common JH71X0 reset code reset: starfive: Factor out common JH71X0 reset code reset: Create subdirectory for StarFive drivers reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE clk: starfive: Rename "jh7100" to "jh71x0" for the common code clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h clk: starfive: Factor out common JH7100 and JH7110 code clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator dt-bindings: clock: Add StarFive JH7110 system clock and reset generator * clk-fractional: clk: Remove mmask and nmask fields in struct clk_fractional_divider clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider clk: Compute masks for fractional_divider clk when needed. * clk-devmof: clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` clk: hsdk-pll: Use managed `of_clk_add_hw_provider()` clk: cdce706: Use managed `of_clk_add_hw_provider()` clk: axs10x: Use managed `of_clk_add_hw_provider()` clk: axm5516: Use managed `of_clk_add_hw_provider()` clk: axi-clkgen: Use managed `of_clk_add_hw_provider()`

Merge branches 'clk-xilinx', 'clk-broadcom' and 'clk-platform' into clk-next

2023-04-25T18:50:36Z

- BCM63268 timer clock and reset controller - Convert platform clk drivers to remove_new * clk-xilinx: clocking-wizard: Support higher frequency accuracy clk: zynqmp: pll: Remove the limit * clk-broadcom: clk: bcm: Add BCM63268 timer clock and reset driver dt-bindings: clock: Add BCM63268 timer binding dt-bindings: reset: add BCM63268 timer reset definitions dt-bindings: clk: add BCM63268 timer clock definitions * clk-platform: (25 commits) clk: xilinx: Convert to platform remove callback returning void clk: x86: Convert to platform remove callback returning void clk: uniphier: Convert to platform remove callback returning void clk: ti: Convert to platform remove callback returning void clk: tegra: Convert to platform remove callback returning void clk: stm32: Convert to platform remove callback returning void clk: mvebu: Convert to platform remove callback returning void clk: mmp: Convert to platform remove callback returning void clk: keystone: Convert to platform remove callback returning void clk: hisilicon: Convert to platform remove callback returning void clk: stm32mp1: Convert to platform remove callback returning void clk: scpi: Convert to platform remove callback returning void clk: s2mps11: Convert to platform remove callback returning void clk: pwm: Convert to platform remove callback returning void clk: palmas: Convert to platform remove callback returning void clk: hsdk-pll: Convert to platform remove callback returning void clk: fixed-rate: Convert to platform remove callback returning void clk: fixed-mmio: Convert to platform remove callback returning void clk: fixed-factor: Convert to platform remove callback returning void clk: axm5516: Convert to platform remove callback returning void ...

Merge branches 'clk-mediatek', 'clk-sunplus', 'clk-loongson' and 'clk-socfpga' into clk-next

2023-04-25T18:50:08Z

- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Reimplement Loongson-1 clk driver with DT support - Clk driver support for Loongson-2 SoCs - Migrate socfpga clk driver to of_clk_add_hw_provider() * clk-mediatek: (84 commits) clk: mediatek: fhctl: Mark local variables static clk: mediatek: Use right match table, include mod_devicetable clk: mediatek: Add MT8188 adsp clock support clk: mediatek: Add MT8188 imp i2c wrapper clock support clk: mediatek: Add MT8188 wpesys clock support clk: mediatek: Add MT8188 vppsys1 clock support clk: mediatek: Add MT8188 vppsys0 clock support clk: mediatek: Add MT8188 vencsys clock support clk: mediatek: Add MT8188 vdosys1 clock support clk: mediatek: Add MT8188 vdosys0 clock support clk: mediatek: Add MT8188 vdecsys clock support clk: mediatek: Add MT8188 mfgcfg clock support clk: mediatek: Add MT8188 ipesys clock support clk: mediatek: Add MT8188 imgsys clock support clk: mediatek: Add MT8188 ccusys clock support clk: mediatek: Add MT8188 camsys clock support clk: mediatek: Add MT8188 infrastructure clock support clk: mediatek: Add MT8188 peripheral clock support clk: mediatek: Add MT8188 topckgen clock support clk: mediatek: Add MT8188 apmixedsys clock support ... * clk-sunplus: clk: Add Sunplus SP7021 clock driver * clk-loongson: clk: clk-loongson2: add clock controller driver support dt-bindings: clock: add loongson-2 boot clock index MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE MIPS: loongson32: Update the clock initialization clk: loongson1: Re-implement the clock driver clk: loongson1: Remove the outdated driver dt-bindings: clock: Add Loongson-1 clock * clk-socfpga: clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling

clk: qcom: gcc-sc8280xp: Add EMAC GDSCs

2023-04-24T14:22:01Z

Add the EMAC GDSCs to allow the EMAC hardware to be enabled. Acked-by: Stephen Boyd Reviewed-by: Konrad Dybcio Tested-by: Brian Masney Signed-off-by: Andrew Halaney Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230413191541.1073027-2-ahalaney@redhat.com

Merge tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

2023-04-14T16:01:50Z

More Qualcomm ARM64 Devicetree updated for v6.4 Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1 board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support for Xiaomi Mi A3 is introduced on SM6125. Support for the output-enable/disable flag is introduced in the pinctrl-msm driver, and the non-standard "input-enable" is dropped from a range of platforms. A wide range of smaller fixes are introduced, based on Devicetree validation. MSM8953 gains LPASS, MPSS and Wireless subsystem support. The iommus property is removed from PCIe nodes in all platforms, as the only the child devices should be associated with iommu groups, through the existing iommu-map property. A few QUP instances are introduced on the IPQ5332 platform, and support for the MI01.6 board is introduced. The reserved-memory map on Huawei Nexus 6P is updated with the addition of splash screen framebuffer memory and adjustment to the reserved memory region overlapping the smem region. Regulators are introduces for the SA8775P Ride platform. A regulator is marked always-on, for correctness, on Trogdor. Pinconf fixes are introduced to both sc7180 and sc7280 devices. A dedicated reviewers list is added for boards relevant to the Chromebook engineers. A set of pinconf fixes are introduced for sc8280xp, labels are introduced for Soundwire nodes. The sensor core remoteproc and FastRPC thereon, is introduce in SDM845 and enabled for OnePlus 6/6T and Shift Shift6mq. RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab P11. UFS support is introduced on SM6125. SM8150 no longer defines the GPU to be in headless mode by default, GPU speedbins are introduced. GPU speedbins are introduced for SM8250 as well, as is support for display on Xiaomi Mi Pad 5 Pro, with two different panels supported. Soundwire controllers, ADSP audio codec macros and the Inline Crypto Engine support is added to the SM8550 platform. * tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits) arm64: dts: qcom: Add base qrb4210-rb2 board dts arm64: dts: qcom: sm8550: add Soundwire controllers arm64: dts: qcom: sm8250: Add GPU speedbin support arm64: dts: qcom: sm8150: Add GPU speedbin support arm64: dts: qcom: sm8150: Don't start Adreno in headless mode arm64: dts: qcom: ipq5332: add support for the RDP468 variant arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs arm64: dts: qcom: sm6115: Add RMTFS arm64: dts: qcom: sm6115-j606f: Add ramoops node arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node arm64: dts: MSM8953: Add lpass nodes arm64: dts: MSM8953: Add mpss nodes arm64: dts: MSM8953: Add wcnss nodes arm64: dts: qcom: sm8350: remove superfluous "input-enable" arm64: dts: qcom: sm8150: remove superfluous "input-enable" arm64: dts: qcom: apq8016: remove superfluous "input-enable" arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength ... Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

2023-04-14T15:57:17Z

Qualcomm ARM64 updates for v6.4 PCI I/O and MEM ranges are corrected across all targets with PCIe enabled. Likewise is CPU clocks defined to be provided from CPUfreq for a wide range of platforms, to satisfy the OPP definitions, and LLCC bank information is corrected for all relevant platforms. IPQ5332 gains SMEM, CPUfreq and support for triggering download mode. The MI01.2 board is introduced. On MSM8916 WCN compatibles are moved to be defined per board, to avoid issues when boards rely on the incorrect defaults. Support for Yiming UZ801 4G modem stick is introduced. XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure clock trees are properly rooted. DSI clocks feeding into gcc are described on MSM8953. On MSM8996 the external audio components are moved from the SoC dtsi. A few DWC3 quirks are added. On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and XZ1 Compact. A numbe of boards have GPIO keys properly marked as wakeup-source. The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers, SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains reset and power key support, as well as thermal zones defined. Nodes are sorted. On top of this the SA8775P Ride board/platform is introduced. On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are introduced, some clearing up unused properties, others correcting errors. A number of Google rev0 boards on SC7180 are dropped, as these are not considered to be in use by anyone anymore. On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt to probe both devices seen in the wild. A number of bug fixes are also introduced, and the regulator definitions on X13s are corrected. On SDM845 dynamic power coefficients are improved. BWMON compatible is corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2, XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc support. OnePlus 6 and 6T gains hall sensor. GPU clock controller and remoteproc nodes are added for SM6115. CPU clock are defined to come from CPUfreq. Board-specific USB-properties are moved out of the SoC dtsi. On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states are defined. Sony Xperia 10 IV gains volume down key support. On SM8150 another UART is introduced, to be used by GNSS on the SA8155 ADP. Support for the Flash LED block in PM8150L is added. On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node. A few bug fixes are introduced after Devicetree validation. The DisplayPort controller on both SM8350 and SM8450 is defined and the related QMP instance is transitioned to the USB3/DP combo variant. IMEM and PIL info is introduced, for post mortem debugging of remoteprocs. On the HDK PMIC GLINK is enabled and role switch is enabled. Some audio resources are corrected. A typo in the USB role property of the Microsoft Surface is corrected, thanks to DeviceTree validation. PCIe controllers and PHYs descriptions are corrected, and pinctrl state definitions are moved from the soc to the board definition. BWMON compatibles are corrected. PM8550B gains the definition of the eUSB2 repeater and this is enabled on the MTP. PMIC GLINK is also defined for the MTP and connected to DWC3, for role switching support. In addition to this, a range of cleanups based on Devicetree validation is introduced. A few clock bindings are introduced, from topic-branches shared with the clock tree, to aid introduction of references to these. * tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits) arm64: dts: qcom: sc8280xp-x13s: Add bluetooth arm64: dts: qcom: sc8280xp: Define uart2 arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes arm64: dts: qcom: sa8775p: pmic: add thermal zones arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input arm64: dts: qcom: sa8775p: pmic: add the power key arm64: dts: qcom: sa8775p: add the Power On device node arm64: dts: qcom: sa8775p: add support for the on-board PMICs arm64: dts: qcom: sa8775p: add the spmi node arm64: dts: qcom: sa8775p: add the pdc node arm64: dts: qcom: sa8775p: sort soc nodes by reg property arm64: dts: qcom: sa8775p: pad reg properties to 8 digits arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1 arm64: dts: qcom: sdm845-tama: Enable GPU arm64: dts: qcom: sdm845-tama: Enable remoteprocs ... Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt

2023-04-14T15:47:47Z

Renesas DTS updates for v6.4 (take two) - Add PWM support for the R-Car H1 and H2 SoCs, - Add slide switch and I2C support for the Marzen development board, - Add SCI (serial) and Camera support for the RZ/G2L SoC and the RZ/G2L SMARC EVK development board, - Add IOMMU support for the R-Car V4H SoC, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712 arm64: dts: renesas: r8a779g0: Add iommus to MMC node arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes arm64: dts: renesas: r8a779g0: Add IPMMU nodes arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay ARM: dts: r8a7790: Add PWM device nodes ARM: dts: r8a7790: Add TPU device node ARM: dts: marzen: Enable I2C support ARM: dts: marzen: Add slide switches ARM: dts: r8a7779: Add PWM support dt-bindings: clock: r8a7779: Add PWM module clock arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann