linux/include/dt-bindings, branch v3.11

Merge tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2013-07-29T01:19:27Z

Pull pin control fixes from Linus Walleij: - Driver fixes for AM33xx, SIRF and PFC pin controllers - Fix a compile warning from the pinctrl single-register driver - Fix a little nasty memory leak * tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix a memleak when freeing maps pinctrl: pinctrl-single: fix compile warning when no CONFIG_PM pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DT arm/dts: sirf: fix the pingroup name mismatch between drivers and dts pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl pinctrl: sirf: fix the pin number and mux bit for usp0 pinctrl: am33xx dt binding: correct include path

pinctrl: am33xx dt binding: correct include path

2013-07-21T17:37:46Z

Using #include is a bit odd. It happens to work because the DTC flags include -Iarch/FOO/boot/dts as well as arch/FOO/boot/dts/include and arch/FOO/boot/dts/include/dt-bindings is a symlink to include/dt-bindings. Signed-off-by: Ian Campbell Cc: Grant Likely Cc: Linus Walleij Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij

ARM: imx: fix vf610 enet module clock selection

2013-07-15T00:28:09Z

The fec/enet driver calculates MDC rate with the formula below. ref_freq / ((MII_SPEED + 1) x 2) The ref_freq here is the fec internal module clock, which is missing from clk-vf610 clock driver right now. And clk-vf610 driver mistakenly supplies RMII clock (50 MHz) as the source to fec. This results in the situation that fec driver gets ref_freq as 50 MHz, while physically it runs at 66 MHz (fec module clock physically sources from ipg which runs at 66 MHz). That's why software expects MDC runs at 2.5 MHz, while the measurement tells it runs at 3.3 MHz. And this causes the PHY KSZ8041 keeps swithing between Full and Half mode as below. libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half Add the missing module clock for ENET0 and ENET1, and correct the clock supplying in device tree to fix above issue. Thanks to Alison Wang for debugging the issue. Signed-off-by: Shawn Guo

Merge tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2013-07-03T18:48:03Z

Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-07-02T21:33:21Z

Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...

Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt

2013-06-20T21:01:41Z

From Benoit Cousson: omap devicetree changes for v3.11 merge window - Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. - Introduce new AM43x silicon. * 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits) ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ARM: dts: omap3-overo: Add default trigger for TWL4030 LED ARM: dts: omap3-tobi: Correct polarity for GPIO LED ARM: dts: omap3-tobi: Add SMSC911X node ARM: dts: OMAP3: Include IRQ header ARM: dts: Protect pinctrl headers against multiple inclusions ARM: AM33XX: clock data: Enable clkout2 as part of init ARM: AM33XX: clock: Add debugSS clock nodes ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm ARM: dts: AM33XX: Add PWMSS device tree nodes ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices ... Signed-off-by: Arnd Bergmann Acked-by: Tony Lindgren

Merge tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

2013-06-20T20:27:52Z

From Kukjin Kim: based on exynos-dt-2 and s3c24xx-dt-2 - use #include for all Samsung DT - add clk for exynos audio subsystem (audss) and i2s - support audss and i2s for exynos5250 * tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung Signed-off-by: Arnd Bergmann

Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

2013-06-20T00:10:42Z

This is a dependency for imx/dt Signed-off-by: Arnd Bergmann

ARM: dts: Protect pinctrl headers against multiple inclusions

2013-06-19T09:34:42Z

Pinctrl headers were not protected with #ifndef. Signed-off-by: Florian Vaussard Acked-by: Grant Likely Signed-off-by: Benoit Cousson

ARM: dts: AM33XX: Specific pinctrl header

2013-06-18T23:53:42Z

The pinctrl IP inside the AM33XX family differs slightly from what is found on OMAP2+. Define a specific header to take account of the differences. Signed-off-by: Florian Vaussard Tested-by: Afzal Mohammed Signed-off-by: Benoit Cousson