linux/include/dt-bindings, branch v4.5

clk: tegra: Add the APB2APE audio clock on Tegra210

2016-02-02T14:49:29Z

The APB2APE clock for the audio subsystem is required for powering up the audio power domain and accessing the various modules in this subsystem on Tegra210 devices. Add this clock for Tegra210. Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:42:30Z

Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:16:29Z

Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...

Merge tag 'clk-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2016-01-16T02:21:28Z

Pull clk framework updates from Michael Turquette: "The clk framework and driver changes for 4.5 look pretty typical. The bulk of the changes are to clk controller drivers, though some improvements to the core and some re-usable blocks/templates also received some love. In this past cycle the clk maintainers developed a good workflow for handling the common case of patch submissions containing a new drivers, new shared Device Tree header and a new Device Tree binding description. This requires coordination with the Device Tree maintainers and with the architecture maintainers (typically the arm-soc tree in our case). This explains the increase in changes to include/dt-bindings/... and to Documentation/devicetree/bindings/clock/... coming from the clk tree. The same commits can be expected to come through those trees on occasion, through the use of shared, immutable branches" * tag 'clk-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: remove duplicated COMMON_CLK_NXP record from clk/Kconfig clk: fix clk-gpio.c with optional clock= DT property clk: rockchip: fix section mismatches with new child-clocks clk: gpio: handle error codes for of_clk_get_parent_count() clk: gpio: fix memory leak clk: shmobile: r8a7795: Add SATA0 clock clk: bcm2835: Add PWM clock support clk: bcm2835: Support for clock parent selection clk: bcm2835: add a round up ability to the clock divisor clk: lpc32xx: add common clock framework driver clk: lpc18xx: add NXP specific COMMON_CLK_NXP configuration symbol dt-bindings: clock: add NXP LPC32xx clock list for consumers dt-bindings: clock: add description of LPC32xx USB clock controller dt-bindings: clock: add description of LPC32xx clock controller clk: rockchip: rk3036: include downstream muxes into fractional dividers clk: add flag for clocks that need to be enabled on rate changes clk: rockchip: Allow the RK3288 SPDIF clocks to change their parent clk: rockchip: include downstream muxes into fractional dividers clk: rockchip: handle mux dependency of fractional dividers clk: bcm2835: Add a driver for the auxiliary peripheral clock gates. ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2016-01-15T01:04:19Z

Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description

Merge tag 'samsung-clk-exynos4-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

2016-01-07T05:05:59Z

Add a Security SubSystem (SSS) clock for Exynos4, needed by exynos-rng driver (Pseudo Random Number Generator). * tag 'samsung-clk-exynos4-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: exynos4: Add SSS gate clock

Merge tag 'tegra-for-4.5-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

2016-01-05T00:16:45Z

clk: tegra: Changes for v4.5-rc1 This set of changes adds support for the Tegra210 SoC and contains a couple fixes and cleanups.

Merge tag 'samsung-dt-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

2015-12-31T16:31:56Z

Merge "Samsung DeviceTree updates and improvements for 4.5" from Krzysztof Kozlowski: 1. eMMC/SDIO minor fixes usage of bindings on Snow and Peach Chromebooks. 2. Remove FIMD from Odroid XU3-family because on XU3 it cannot be used yet and on XU3-Lite and XU4 it is not supported. 3. Remove deprecated since June 2013 samsung,exynos5-hdmi. 4. Add support for Pseudo Random Generator on Exynos4 (Trats2 for now). This depends on new SSS clock. 5. Add rotator nodes for Exynos4 and Exynos5. 6. Switch DWC3_1 on Odroid XU3 and XU3-Lite to peripheral mode because now it cannot be used as OTG. 7. Cleanup the G2D usage on Exynos4 and add it to a proper domain in case of Exynos4210. 8. Put MDMA1 in proper domain on Exynos4210 as well. 9. Minor cleanups. * tag 'samsung-dt-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (21 commits) ARM: dts: Unify G2D device node with other devices on exynos4 ARM: dts: Add power domain to G2D device on exynos4210 ARM: dts: MDMA1 device belongs to LCD0 power domain on exynos4210 ARM: dts: Remove unneeded GPIO include in exynos4412-odroidu3 ARM: dts: exynos4210-universal_c210: Disable DMA for UARTs ARM: dts: Use peripheral mode for dwc3_1 on exynos5422-odroidxu3 ARM: dts: Add rotator node on exynos5420 ARM: dts: Add rotator node on exynos5250 ARM: dts: Fix power domain for sysmmu-rotator device on exynos4 ARM: dts: Add rotator nodes on exynos4 ARM: dts: Enable PRNG module on exynos4412-trats2 ARM: dts: Add PRNG module for exynos4 dt-bindings: remove deprecated compatible string from exynos-hdmi ARM: dts: Remove fimd node from exynos5422-odroidxu3-common ARM: dts: Mark eMMC as non-removable in exynos5250-snow-common ARM: dts: Remove broken-cd from eMMC node in exynos5420-peach-pi ARM: dts: Remove broken-cd from eMMC node in exynos5800-peach-pi ARM: dts: Mark SDIO as non-removable in exynos5250-snow-common ARM: dts: Mark SDIO as non-removable in exynos5420-peach-pit ARM: dts: Mark SDIO as non-removable in exynos5800-peach-pi ...

Merge tag 'bcm2835-drivers-next-2015-12-28' of http://github.com/anholt/linux into next/drivers

2015-12-31T16:11:29Z

Pull "BCM2835 drivers changes for 4.5" from Eric Anholt: This pull request includes the bcm2835 changes for 4.5 targeting the arm-soc next/drivers branch. * tag 'bcm2835-drivers-next-2015-12-28' of http://github.com/anholt/linux: ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware.

Merge tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

2015-12-31T15:25:22Z

Pull "reworked dts changes for ti81xx devices and minimal dra62x j5ec-evm support" from Tony Lindgren: Add minimal device tree support for dra62x also known j5eco. It is related to dm814x, just the clocks are a bit different and it has a different set of integrated devices. And let's get some basic dm814x and dra62x devices working as many of the devices are like on am33xx:: - pinctrl using the pinctrl defines as for am33xx - Updated EDMA bindings with support for using exma_xbar - MMC support for dm814x-evm, t410 and dra62x-j5eco-evm - USB support for dm814x-evm, t410 and dra62x-j5eco-evm This branch depends on an earlier omap-for-v4.5/81xx-fixes-signed branch that has dm814x dts fixes interlaced with SoC related fixes to keep things booting. The interlaced SoC and dts fixes were needed because of issues with the device tree defined clocks that just happened to work on bootloader timings for t410 earlier. * tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits) ARM: dts: Add usb support for j5-eco evm ARM: dts: Add usb support for hp t410 ARM: dts: Add usb support for dm814x-evm ARM: dts: Add usb support for dm814x and dra62x ARM: dts: Enable emmc on hp t410 ARM: dts: Add mmc support for dra62x j5-eco evm ARM: dts: Add mmc support for dm8148-evm ARM: dts: Add mmc device entries for dm814x ARM: dts: Update edma bindings on dm814x to use edma_xbar ARM: dts: Add pinctrl macros for dm814x ARM: dts: Add minimal dra62x j5-eco evm support ARM: dts: Add basic support for dra62x j5-eco SoC ARM: OMAP2+: Remove useless check for legacy booting for dm814x ARM: OMAP2+: Enable GPIO for dm814x ARM: dts: Fix dm814x pinctrl address and mask ARM: dts: Fix dm8148 control modules ranges ARM: OMAP2+: Fix timer entries for dm814x ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting ARM: OMAP2+: Add DPPLS clock manager for dm814x clk: ti: Add few dm814x clock aliases ...