linux/include/dt-bindings, branch v5.0

Merge tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-02-09T00:23:41Z

Pull ARM SoC fixes from Arnd Bergmann: "This is a bit larger than normal, as we had not managed to send out a pull request before traveling for a week without my signing key. There are multiple code fixes for older bugs, all of which should get backported into stable kernels: - tango: one fix for multiplatform configurations broken on other platforms when tango is enabled - arm_scmi: device unregistration fix - iop32x: fix kernel oops from extraneous __init annotation - pxa: remove a double kfree - fsl qbman: close an interrupt clearing race The rest is the usual collection of smaller fixes for device tree files, on the renesas, allwinner, meson, omap, davinci, qualcomm and imx platforms. Some of these are for compile-time warnings, most are for board specific functionality that fails to work because of incorrect settings" * tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: tango: Improve ARCH_MULTIPLATFORM compatibility firmware: arm_scmi: provide the mandatory device release callback ARM: iop32x/n2100: fix PCI IRQ mapping arm64: dts: add msm8996 compatible to gicv3 ARM: dts: am335x-shc.dts: fix wrong cd pin level ARM: dts: n900: fix mmc1 card detect gpio polarity ARM: dts: omap3-gta04: Fix graph_port warning ARM: pxa: ssp: unneeded to free devm_ allocated data ARM: dts: r8a7743: Convert to new LVDS DT bindings soc: fsl: qbman: avoid race in clearing QMan interrupt arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 ARM: dts: da850: fix interrupt numbers for clocksource dt-bindings: imx8mq: Number clocks consecutively arm64: dts: meson: Fix mmc cd-gpios polarity ARM: dts: imx6sx: correct backward compatible of gpt ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3 ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ...

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2019-02-01T07:22:57Z

Pull clk fixes from Stephen Boyd: "Mostly driver fixes, but there's a core framework fix in here too: - Revert the commits that introduce clk management for the SP clk on MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and there isn't any need to manage this clk, it just causes more headaches. - A performance regression that went unnoticed for many years where we would traverse the entire clk tree looking for a clk by name when we already have the pointer to said clk that we're looking for - A parent linkage fix for the qcom SDM845 clk driver - An i.MX clk driver rate miscalculation fix where order of operations were messed up - One error handling fix from the static checkers" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc: Use active only source for CPUSS clocks clk: ti: Fix error handling in ti_clk_parse_divider_data() clk: imx: Fix fractional clock set rate computation clk: Remove global clk traversal on fetch parent index Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock" Revert "clk: mmp2: add SP clock" Revert "Input: olpc_apsp - enable the SP clock"

Merge tag 'imx-fixes-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2019-01-30T10:34:38Z

i.MX fixes for 5.0, 2nd round: It contains a single fix for i.MX8MQ clock numbers, removing the duplicate use of 232 and numbering the clocks consecutively. * tag 'imx-fixes-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: imx8mq: Number clocks consecutively Signed-off-by: Arnd Bergmann

Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"

2019-01-24T18:55:33Z

It seems that the kernel has no business managing this clock: once the SP clock is disabled, it's not sufficient to just enable it in order to bring the SP core back up. Pretty sure nothing ever used this and it's safe to remove. This reverts commit e8a2c779141415105825e65a4715f1130bba61b1. Signed-off-by: Lubomir Rintel Signed-off-by: Stephen Boyd

dt-bindings: reset: meson-axg: fix SPDX license id

2019-01-16T18:50:27Z

As reported, the SPDX license id is not placed correctly and the variant of the BSD License used should be specified. Fixes: c16292578ffa ("dt-bindings: reset: Add bindings for the Meson-AXG SoC Reset Controller") Reported-by: Thomas Gleixner Signed-off-by: Jerome Brunet Reviewed-by: Thomas Gleixner Signed-off-by: Rob Herring

dt-bindings: imx8mq: Number clocks consecutively

2019-01-16T13:27:02Z

This fixes a duplicate use of 232 and numbers the clocks without holes. Fixes: 1cf3817bf1f5 ("dt-bindings: Add binding for i.MX8MQ CCM") Signed-off-by: Guido Günther Reviewed-by: Lucas Stach Signed-off-by: Shawn Guo

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2019-01-03T02:56:59Z

Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2019-01-03T02:45:50Z

Pull more clk updates from Stephen Boyd: "One more patch to generalize a set of DT binding defines now before -rc1 comes out. This way the SoC DTS files can use the proper defines from a stable tag" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx8qxp: make the name of clock ID generic

Merge tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration

2019-01-03T02:41:38Z

Pull mailbox updates from Jassi Brar: - Introduce device-managed registration devm_mbox_controller_un/register and convert drivers to use it - Introduce flush api to support clients that must busy-wait in atomic context - Support multiple controllers per device - Hi3660: a bugfix and constify ops structure - TI-MsgMgr: off by one bugfix. - BCM: switch to spdx license - Tegra-HSP: support for shared mailboxes and suspend/resume. * tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (30 commits) mailbox: tegra-hsp: Use device-managed registration API mailbox: tegra-hsp: use devm_kstrdup_const() mailbox: tegra-hsp: Add suspend/resume support mailbox: tegra-hsp: Add support for shared mailboxes dt-bindings: tegra186-hsp: Add shared mailboxes mailbox: Allow multiple controllers per device mailbox: Support blocking transfers in atomic context mailbox: ti-msgmgr: Use device-managed registration API mailbox: stm32-ipcc: Use device-managed registration API mailbox: rockchip: Use device-managed registration API mailbox: qcom-apcs: Use device-managed registration API mailbox: platform-mhu: Use device-managed registration API mailbox: omap: Use device-managed registration API mailbox: mtk-cmdq: Remove needless devm_kfree() calls mailbox: mtk-cmdq: Use device-managed registration API mailbox: xgene-slimpro: Use device-managed registration API mailbox: sti: Use device-managed registration API mailbox: altera: Use device-managed registration API mailbox: imx: Use device-managed registration API mailbox: hi6220: Use device-managed registration API ...

Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-01-01T23:45:48Z

Pull dmaengine updates from Vinod Koul: "This includes a new driver, removes R-Mobile APE6 as it is no longer used, sprd cyclic dma support, last batch of dma_slave_config direction removal and random updates to bunch of drivers. Summary: - New driver for UniPhier MIO DMA controller - Remove R-Mobile APE6 support - Sprd driver updates and support for cyclic link-list - Remove dma_slave_config direction usage from rest of drivers - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers" * tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits) dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: pxa: remove DBGFS_FUNC_DECL() dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: Documentation: Add documentation for multi chan testing dmaengine: dmatest: Add transfer_size parameter dmaengine: dmatest: Add alignment parameter dmaengine: dmatest: Use fixed point div to calculate iops dmaengine: dmatest: Add support for multi channel testing dmaengine: rcar-dmac: Document R8A774C0 bindings dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave dmaengine: sprd: Add me as one of the module authors dmaengine: sprd: Support DMA 2-stage transfer mode dmaengine: sprd: Support DMA link-list cyclic callback dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel dmaengine: sprd: Fix the last link-list configuration dmaengine: sprd: Get transfer residue depending on the transfer direction dmaengine: sprd: Remove direction usage from struct dma_slave_config dmaengine: dmatest: fix a small memory leak in dmatest_func() ...