linux/include/dt-bindings, branch v5.11

ASoC: dt-bindings: lpass: Fix and common up lpass dai ids

2021-01-20T16:46:44Z

Existing header file design of having separate SoC specific header files for the common lpass driver has mutiple issues. This design is prone to break as an when new SoC header is added as the common DAI ids of other SoCs will be overwritten by the new ones. One of them surfaced by recent patch that adds support to sc7180, this one totally broke LPASS drivers on other Qualcomm SoCs. Before this gets worst, fix this by having a common header qcom,lpass.h. This should fix the issue and any new DAI ids should be added to the common header. This will be more sustainable then the existing design! Fixes: 12fbfc4cabec6595 ("ASoC: Add sc7180-lpass binding header hdmi define") Reported-by: Jun Nie Reported-by: Stephan Gerhold Tested-by: Srinivasa Rao Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20210119171527.32145-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-12-21T18:39:37Z

Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...

Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and 'clk-marvell' into clk-next

2020-12-21T01:18:05Z

- Bindings for Canaan K210 SoC clks * clk-ingenic: clk: ingenic: Fix divider calculation with div tables * clk-vc5: clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" * clk-cleanup: clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: bcm: dvp: Add MODULE_DEVICE_TABLE() clk: bcm: dvp: drop a variable that is assigned to only * clk-canaan: dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix * clk-marvell: clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9

Merge branches 'clk-ti', 'clk-analog', 'clk-trace', 'clk-at91' and 'clk-silabs' into clk-next

2020-12-21T01:17:51Z

- Add some trace points for clk_set_rate() "range" functions - DVFS support for AT91 clk driver * clk-ti: clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERs clk: ti: Fix memleak in ti_fapll_synth_setup * clk-analog: clk: axi-clkgen: move the OF table at the bottom of the file clk: axi-clkgen: wrap limits in a struct and keep copy on the state object dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format * clk-trace: clk: Trace clk_set_rate() "range" functions * clk-at91: clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error * clk-silabs: clk: si5351: Wait for bit clear after PLL reset

Merge branches 'clk-tegra', 'clk-imx', 'clk-sifive', 'clk-mediatek' and 'clk-summary' into clk-next

2020-12-21T01:17:37Z

- Support for SiFive FU740 PRCI - Add hardware enable information to clk_summary debugfs * clk-tegra: clk: tegra: Fix duplicated SE clock entry clk: tegra: bpmp: Clamp clock rates on requests clk: tegra: Do not return 0 on failure * clk-imx: (24 commits) clk: imx: scu: remove the calling of device_is_bound clk: imx: scu: Make pd_np with static keyword clk: imx8mq: drop of_match_ptr from of_device_id table clk: imx8mp: drop of_match_ptr from of_device_id table clk: imx8mn: drop of_match_ptr from of_device_id table clk: imx8mm: drop of_match_ptr from of_device_id table clk: imx: gate2: Remove unused variable ret clk: imx: gate2: Add locking in is_enabled op clk: imx: gate2: Add cgr_mask for more flexible number of control bits clk: imx: gate2: Check if clock is enabled against cgr_val clk: imx: gate2: Keep the register writing in on place clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case clk: imx: scu: fix build break when compiled as modules clk: imx: remove redundant assignment to pointer np clk: imx: remove unneeded semicolon clk: imx: lpcg: add suspend/resume support clk: imx: clk-imx8qxp-lpcg: add runtime pm support clk: imx: lpcg: allow lpcg clk to take device pointer clk: imx: imx8qxp-lpcg: add parsing clocks from device tree clk: imx: scu: add suspend/resume support ... * clk-sifive: clk: sifive: Add clock enable and disable ops clk: sifive: Fix the wrong bit field shift clk: sifive: Add a driver for the SiFive FU740 PRCI IP block clk: sifive: Use common name for prci configuration clk: sifive: Extract prci core to common base dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI * clk-mediatek: clk: mediatek: Make mtk_clk_register_mux() a static function * clk-summary: clk: Add hardware-enable column to clk summary

Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and 'clk-unused' into clk-next

2020-12-21T01:17:25Z

- Replace clk-provider.h with of_clk.h when possible * clk-amlogic: clk: meson: g12a: add MIPI DSI Host Pixel Clock dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings clk: meson: enable building as modules clk: meson: Kconfig: fix dependency for G12A clk: meson: axg: add MIPI DSI Host clock clk: meson: axg: add Video Clocks dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks * clk-rockchip: clk: rockchip: fix i2s gate bits on rk3066 and rk3188 clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks clk: rockchip: Remove redundant null check before clk_prepare_enable clk: rockchip: Add appropriate arch dependencies * clk-of: xtensa: Replace by sh: boards: Replace by * clk-freescale: clk: fsl-flexspi: new driver dt-bindings: clock: document the fsl-flexspi-clk device clk: divider: add devm_clk_hw_register_divider_table() clk: qoriq: provide constants for the type clk: fsl-sai: use devm_clk_hw_register_composite_pdata() clk: composite: add devm_clk_hw_register_composite_pdata() clk: fsl-sai: fix memory leak clk: qoriq: Add platform dependencies * clk-unused: clk: scpi: mark scpi_clk_match as maybe unused clk: pwm: drop of_match_ptr from of_device_id table

dt-binding: clock: Document canaan,k210-clk bindings

2020-12-20T18:44:37Z

Document the device tree bindings of the Canaan Kendryte K210 SoC clock driver in Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml. The header file include/dt-bindings/clock/k210-clk.h is modified to include the complete list of IDs for all clocks of the SoC. Signed-off-by: Damien Le Moal Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201220085725.19545-3-damien.lemoal@wdc.com Signed-off-by: Stephen Boyd

clk: at91: sama7g5: register cpu clock

2020-12-19T19:50:56Z

Register CPU clock as being the master clock prescaler. This would be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the frequencies supported by SAMA7G5 could be directly received from CPUPLL + master clock prescaler and the extra divider would do no work in case it would be enabled. Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd

dt-bindings: clock: at91: add sama7g5 pll defines

2020-12-19T19:50:55Z

Add SAMA7G5 specific PLL defines to be referenced in a phandle as a PMC_TYPE_CORE clock. Suggested-by: Claudiu Beznea Signed-off-by: Eugen Hristev [claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c] Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd

Merge tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2020-12-18T02:07:20Z

Pull GPIO updates from Linus Walleij: "This is the bulk of the GPIO changes for the v5.11 kernel cycle: Core changes: - Retired the old set-up function for GPIO IRQ chips. All chips now use the template struct gpio_irq_chip and pass that to the core to be set up alongside the gpio_chip. We can finally get rid of the old cruft. - Some refactoring and clean up of the core code. - Support edge event timestamps to be stamped using REALTIME (wall clock) timestamps. We have found solid use cases for this, so we support it. New drivers: - MStar MSC313 GPIO driver. - HiSilicon GPIO driver. Driver improvements: - The PCA953x driver now also supports the NXP PCAL9554B/C chips. - The mockup driver can now be probed from the device tree which is pretty useful for virtual prototyping of devices. - The Rcar driver now supports .get_multiple() - The MXC driver dropped some legacy and became a pure device tree client. - The Exar driver was moved over to the IDA interface for enumerating, and also switched over to using regmap for register access" * tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) MAINTAINERS: Remove reference to non-existing file gpio: hisi: Do not require ACPI for COMPILE_TEST MAINTAINERS: Add maintainer for HiSilicon GPIO driver gpio: gpio-hisi: Add HiSilicon GPIO support gpio: cs5535: Simplify the return expression of cs5535_gpio_probe() gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask dt-bindings: mt7621-gpio: convert bindings to YAML format gpiolib: cdev: Flag invalid GPIOs as used gpio: put virtual gpio device into their own submenu drivers: gpio: amd8111: use SPDX-License-Identifier drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk gpio: Add TODO item for debugfs interface gpio: just plain warning when nonexisting gpio requested tools: gpio: add option to report wall-clock time to gpio-event-mon tools: gpio: add support for reporting realtime event clock to lsgpio gpiolib: cdev: allow edge event timestamps to be configured as REALTIME gpio: msc313: MStar MSC313 GPIO driver dt-bindings: gpio: Binding for MStar MSC313 GPIO controller dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ...