Mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ https://git.shady.money/linux/atom?h=v6.2 2022-12-21T17:37:14Z 2022-12-21T17:37:14Z Linus Torvalds torvalds@linux-foundation.org 2022-12-21T17:37:14Z urn:sha1:9cf5b508bd260d5693d337bcf1f9b82b961b6137 Pull remoteproc updates from Bjorn Andersson: "rproc-virtio device names are now auto generated, to avoid conflicts between remoteproc instances. The imx_rproc driver is extended with support for communicating with and attaching to a running M4 on i.MX8QXP, as well as support for attaching to the M4 after self-recovering from a crash. Support is added for i.MX8QM and mailbox channels are reconnected during the recovery process, in order to avoid data corruption. The Xilinx Zynqmp firmware interface is extended and support for the Xilinx R5 RPU is introduced. Various resources leaks, primarily in error paths, throughout the Qualcomm drivers are corrected. Lastly a fix to ensure that pm_relax is invoked even if the remoteproc instance is stopped between a crash is being reported and the recovery handler is scheduled" * tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits) remoteproc: core: Do pm_relax when in RPROC_OFFLINE state remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() remoteproc: qcom_q6v5_pas: detach power domains on remove remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() remoteproc: sysmon: Make QMI message rules const drivers: remoteproc: Add Xilinx r5 remoteproc driver firmware: xilinx: Add RPU configuration APIs firmware: xilinx: Add shutdown/wakeup APIs firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. arm64: dts: xilinx: zynqmp: Add RPU subsystem device node dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings remoteproc: core: Use device_match_of_node() remoteproc: imx_rproc: Correct i.MX93 DRAM mapping remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP remoteproc: imx_rproc: Request mbox channel later remoteproc: imx_rproc: Support i.MX8QM remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP ... 2022-12-21T17:31:18Z Linus Torvalds torvalds@linux-foundation.org 2022-12-21T17:31:18Z urn:sha1:f2855eec19cadddad2900da3a009ee39df6116a7 Pull mailbox updates from Jassi Brar: - qcom: enable sc8280xp, sm8550 and sm4250 support - ti: default to ARCH_K3 for msg manager - mediatek: - add mt8188 and mt8186 support - request irq only after got ready - zynq-ipi: fix error handling after device_register - mpfs: check sys-con status - rockchip: simplify by using device_get_match_data * tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550 mailbox: mtk-cmdq: Do not request irq until we are ready mailbox: zynq-ipi: fix error handling while device_register() fails mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying mailbox: arm_mhuv2: Fix return value check in mhuv2_probe() dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name dt-bindings: mailbox: add GCE header file for mt8188 mailbox: mpfs: read the system controller's status mailbox: mtk-cmdq: add MT8186 support mailbox: mtk-cmdq: add gce ddr enable support flow mailbox: mtk-cmdq: add gce software ddr enable private data mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number mailbox: rockchip: Use device_get_match_data() to simplify the code dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support dt-bindings: mailbox: qcom: Add SM4250 APCS compatible 2022-12-19T14:40:58Z Linus Torvalds torvalds@linux-foundation.org 2022-12-19T14:40:58Z urn:sha1:e79041113b19b8c7b8410d862d4a3630debded58 Pull phy updates from Vinod Koul: "This tme we have again a big pile of qcom-qmp-* changes, one new driver and bunch of new hardware support. New hardware support: - Allwinner H616 USB PHY and A100 DPHY support - TI J721s2, J784s4 and J721e support - Freescale i.MX8MP PCIe PHY support - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 - Qualcomm SM8450 PCIe1 PHY support in EP mode - Qualcomm SC8280XP PCIe PHY support (including x4 mode) - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings Updates: - A big pile of updates on qcom-qmp-* drivers following the driver split and reorganization merged earlier - Phy order of API calls documentation update" * tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits) phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support dt-bindings: phy-j721e-wiz: add j721s2 compatible string phy: use devm_platform_get_and_ioremap_resource() phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property phy: qcom-qmp-pcie: drop redundant clock allocation phy: qcom-qmp-usb: drop redundant clock allocation phy: qcom-qmp: drop unused type header phy: qcom-qmp-usb: drop sc8280xp reference-clock source dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source phy: qcom-qmp-combo: add support for updated sc8280xp binding phy: qcom-qmp-combo: rename DP_PHY register pointer phy: qcom-qmp-combo: rename common-register pointers phy: qcom-qmp-combo: clean up DP clock callbacks phy: qcom-qmp-combo: separate clock and provider registration phy: qcom-qmp-combo: add clock registration helper ... 2022-12-19T14:34:39Z Linus Torvalds torvalds@linux-foundation.org 2022-12-19T14:34:39Z urn:sha1:b8fd76f41820951d8a6e2521c25f54afadf338bd Pull iommu updates from Joerg Roedel: "Core code: - map/unmap_pages() cleanup - SVA and IOPF refactoring - Clean up and document return codes from device/domain attachment AMD driver: - Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and ivrs_acpihid command line options - Some smaller cleanups Intel driver: - Blocking domain support - Cleanups S390 driver: - Fixes and improvements for attach and aperture handling PAMU driver: - Resource leak fix and cleanup Rockchip driver: - Page table permission bit fix Mediatek driver: - Improve safety from invalid dts input - Smaller fixes and improvements Exynos driver: - Fix driver initialization sequence Sun50i driver: - Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever - Various other fixes" * tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits) iommu/mediatek: Fix forever loop in error handling iommu/mediatek: Fix crash on isr after kexec() iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY iommu/amd: Fix typo in macro parameter name iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data iommu/mediatek: Improve safety for mediatek,smi property in larb nodes iommu/mediatek: Validate number of phandles associated with "mediatek,larbs" iommu/mediatek: Add error path for loop of mm_dts_parse iommu/mediatek: Use component_match_add iommu/mediatek: Add platform_device_put for recovering the device refcnt iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe() iommu/vt-d: Use real field for indication of first level iommu/vt-d: Remove unnecessary domain_context_mapped() iommu/vt-d: Rename domain_add_dev_info() iommu/vt-d: Rename iommu_disable_dev_iotlb() iommu/vt-d: Add blocking domain support iommu/vt-d: Add device_block_translation() helper iommu/vt-d: Allocate pasid table in device probe path iommu/amd: Check return value of mmu_notifier_register() iommu/amd: Fix pci device refcount leak in ppr_notifier() ... 2022-12-19T02:40:30Z Elvis Wang Elvis.Wang@mediatek.com 2022-12-01T07:13:15Z urn:sha1:359f608f66b4434fb83b74e23ad14631ea3efc4e Add Global Command Engine(GCE) header file to define the GCE thread priority, GCE subsys id, event and constant for mt8188. Signed-off-by: Elvis Wang <Elvis.Wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno<angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> 2022-12-17T14:34:01Z Linus Torvalds torvalds@linux-foundation.org 2022-12-17T14:34:01Z urn:sha1:b611996ef270a88ebb350c82832c4d76913887e9 Pull watchdog updates from Wim Van Sebroeck: - Add Advantech EC watchdog driver - Add support for MT6795 Helio X10 watchdog and toprgu - Add support for MT8188 watchdog device - Remove #ifdef guards for PM related functions - Other fixes and improvements * tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: aspeed: Enable pre-timeout interrupt watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running watchdog: rn5t618: add support for read out bootstatus watchdog: kempld: Remove #ifdef guards for PM related functions watchdog: omap: Remove #ifdef guards for PM related functions watchdog: twl4030: Remove #ifdef guards for PM related functions watchdog: at91rm9200: Remove #ifdef guards for PM related functions watchdog: Add Advantech EC watchdog driver dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173 dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795 dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema watchdog: mediatek: mt8188: add wdt support dt-bindings: reset: mt8188: add toprgu reset-controller header file dt-bindings: watchdog: Add compatible for MediaTek MT8188 watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu 2022-12-13T21:46:07Z Linus Torvalds torvalds@linux-foundation.org 2022-12-13T21:46:07Z urn:sha1:0015edd6f66172f93aa720192020138ca13ba0a6 Pull clk driver updates from Stephen Boyd: "A pile of clk driver updates with a small tracepoint patch to the clk core this time around. The core framework is effectively unchanged, with the majority of the diff going to the Qualcomm clk driver directory because they added two 3k line files that are almost all clk data (Abel Vesa from Linaro tried to shrink the number of lines down, but it doesn't seem to be possible without sacrificing readability). The second big driver this time around is the Rockchip rk3588 clk and reset unit, at _only_ 2.5k lines. Ignoring the big clk drivers from the familiar SoC vendors, there's just a bunch of little clk driver updates and fixes throughout here. It's the usual set of clk data fixups to describe proper parents, or add frequencies to frequency tables, or plug memory leaks when function calls fail. Also, some drivers are converted to use modern clk_hw APIs, which is always nice to see. And data is deduplicated, leading to a smaller kernel Image. Overall this batch has a larger collection of cleanups than it typically does. Maybe that means there are less new SoCs right now that need supporting, and the focus has shifted to quality and reliability. I can dream. New Drivers: - Frequency hopping controller hardware on MediaTek MT8186 - Global clock controller for Qualcomm SM8550 - Display clock controller for Qualcomm SC8280XP - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs - CPU PLL on MStar/SigmaStar SoCs - Support for the clock and reset unit of the Rockchip rk3588 Updates: - Tracepoints for clk_rate_request structures - Debugfs support for fractional divider clk - Make MxL's CGU driver secure compatible - Ingenic JZ4755 SoC clk support - Support audio clks on X1000 SoCs - Remove flags from univ/main/syspll child fixed factor clocks across MediaTek platforms - Fix clock dependency for ADC on MediaTek MT7986 - Fix parent for FlexSPI clock for i.MX93 - Add USB suspend clock on i.MX8MP - Unmap anatop base on error for i.MX93 driver - Change enet clock parent to wakeup_axi_root for i.MX93 - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93 - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93 - Add 320MHz and 640MHz entries to PLL146x - Add audio shared gate and SAI clocks for i.MX8MP - Fix a possible memory leak in the error path of rockchip PLL creation - Fix header guard for V3S clocks - Add IR module clock for f1c100s - Correct the parent clocks for the (High Speed) Serial Communication Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet Switch clocks on Renesas R-Car S4-8 - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas R-Car V4H - Two PLL driver fixups for the Amlogic clk driver - Round SD clock rate to improve parent clock selection - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car S4-8 - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX) serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4H - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on Renesas RZ/G2L - Fix endless loop on Renesas RZ/N1 - Correct the parent clocks for the High Speed Serial Communication Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC Note: HSCIF0 is used for the serial console on the White-Hawk development board - Various clk DT binding improvements and conversions to YAML - Qualcomm SM8150/SM8250 display clock controller cleaned up - Some missing clocks for Qualcomm SM8350 added - Qualcomm MSM8974 Global and Multimedia clock controllers transitioned to parent_data and parent_hws - Use parent_data and add network resets for Qualcomm IPQ8074 - Qualcomm Krait clock controller modernized - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock controllers - Enable retention mode on Qualcomm SM8250 USB GDSCs - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating clocks which definition could be shared between platforms - Various NULL pointer checks added for allocations" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits) clk: nomadik: correct struct name kernel-doc warning clk: lmk04832: fix kernel-doc warnings clk: lmk04832: drop superfluous #include clk: lmk04832: drop unnecessary semicolons clk: lmk04832: declare variables as const when possible clk: socfpga: Fix memory leak in socfpga_gate_init() clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE clk: st: Fix memory leak in st_of_quadfs_setup() clk: samsung: Fix memory leak in _samsung_clk_register_pll() clk: Add trace events for rate requests clk: Store clk_core for clk_rate_request clk: qcom: rpmh: add support for SM6350 rpmh IPA clock clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: mmcc-msm8974: move clock parent tables down clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: gcc-msm8974: move clock parent tables down clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974 dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file ... 2022-12-13T21:03:06Z Linus Torvalds torvalds@linux-foundation.org 2022-12-13T21:03:06Z urn:sha1:361c89a0da59c04b1d3d33568965fe426b0f18de Pull pin control updates from Linus Walleij: "The two large chunks is the header clean-up from Andy and the Qualcomm DT bindings clean-up from Krzysztof. Each which could give rise to conflicts, but I haven't seen any. The YAML conversions happening around the device tree is the biggest item in the series and is the result of Rob Herrings ambition to autovalidate these trees against strict schemas and it is paying off in lots of bugs found and ever prettier device trees. Sooner or later the transition will be complete, Krzysztof is fixing up all of the Qualcomm stuff, which is pretty voluminous. Core changes: - minor but nice and important documentation clean-ups New drivers: - subdriver for the Qualcomm SDM670 SoC - subdriver for the Intel Moorefield SoC - trivial support for the NXP Freescale i.MXRT1170 SoC Other changes and improvements - major clean-up of the Qualcomm pin control device tree bindings by Krzysztof - major header clean-up by Andy - some immutable irqchip clean-up for the Actions Semiconductor and Nuvoton drivers - GPIO helpers for The Cypress cy8c95x0 driver - bias handling in the Mediatek MT7986 driver - remove the unused pins-are-numbered concept that never flew" * tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits) pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions() dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered pinctrl: stm32: Remove check for pins-are-numbered pinctrl: mediatek: common: Remove check for pins-are-numbered pinctrl: qcom: remove duplicate included header files pinctrl: sunxi: d1: Add CAN bus pinmuxes pinctrl: loongson2: Fix some const correctness pinctrl: pinconf-generic: add missing of_node_put() pinctrl: intel: Enumerate PWM device when community has a capability pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() pwm: lpss: Allow other drivers to enable PWM LPSS pwm: lpss: Include headers we are the direct user of pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS pwm: Add a stub for devm_pwmchip_add() pinctrl: k210: call of_node_put() pinctrl: starfive: Use existing variable gpio dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching pinconf-generic: fix style issues in pin_config_param doc pinctrl: pinctrl-loongson2: fix Kconfig dependency ... 2022-12-13T19:36:58Z Linus Torvalds torvalds@linux-foundation.org 2022-12-13T19:36:58Z urn:sha1:cdb9d3537711939e4d8fd0de2889c966f88346eb Pull media updates from Mauro Carvalho Chehab: - DVB core changes to avoid refcount troubles and UAF - DVB API/core has gained support for DVB-C2 and DVB-S2X - New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c - Removal of an unused sensor driver: s5k4ecgx - Move microchip_csi2dc to a new directory, named after the manufacturer - Add media controller support to Microship drivers - Old Atmel/Microship drivers that don't use media controler got moved to staging - New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support - Allwinner A31 camera sensor driver code was now split into a bridge and a separate processor driver - Added a virtual stateless decoder driver in order to test core support for stateless drivers and test userspace apps using it - removed platform-based support for ov9650, as this is not used anymore - atomisp now uses videobuf2 and supports normal mmap mode - the imx7-media-csi driver got promoted from staging - rcar-vin driver has gained support for gen3 UDS (Up Down Scaler) - most i2c drivers now use I2C .probe_new() kAPI - lots of drivers fixes, cleanups and improvements * tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits) media: s5c73m3: Switch to GPIO descriptors media: i2c: s5k5baf: switch to using gpiod API media: i2c: s5k6a3: switch to using gpiod API media: imx: remove code for non-existing config IMX_GPT_ICAP media: si470x: Fix use-after-free in si470x_int_in_callback() media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies media: coda: Add check for kmalloc media: coda: Add check for dcoda_iram_alloc dt-bindings: media: s5c73m3: Fix reset-gpio descriptor media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property media: s5k4ecgx: Delete driver media: s5k4ecgx: Switch to GPIO descriptors media: Switch to use dev_err_probe() helper headers: Remove some left-over license text in include/uapi/linux/v4l2-* headers: Remove some left-over license text in include/uapi/linux/dvb/ media: usb: pwc-uncompress: Use flex array destination for memcpy() media: s5p-mfc: Fix to handle reference queue during finishing media: s5p-mfc: Clear workbit to handle error condition media: s5p-mfc: Fix in register read and write for H264 media: imx: Use get_mbus_config instead of parsing upstream DT endpoints ... 2022-12-12T19:13:28Z Stephen Boyd sboyd@kernel.org 2022-12-12T19:13:28Z urn:sha1:0e2c9884cbbae00f956d881848669790d73be43d - Tracepoints for clk_rate_request structures * clk-mediatek: clk: mediatek: fix dependency of MT7986 ADC clocks clk: mediatek: Change PLL register API for MT8186 clk: mediatek: Add new clock driver to handle FHCTL hardware dt-bindings: clock: mediatek: Add new bindings of MediaTek frequency hopping clk: mediatek: Export PLL operations symbols clk: mediatek: mt8186-topckgen: Add GPU clock mux notifier clk: mediatek: mt8186-mfg: Propagate rate changes to parent clk: mediatek: mt8195-topckgen: Drop flags for main/univpll fixed factors clk: mediatek: mt8192: Drop flags for main/univpll fixed factors clk: mediatek: mt6795-topckgen: Drop flags for main/sys/univpll fixed factors clk: mediatek: mt8173: Drop flags for main/sys/univpll fixed factors clk: mediatek: mt8183: Drop flags for sys/univpll fixed factors clk: mediatek: mt8183: Compress top_divs array entries clk: mediatek: mt8186-topckgen: Drop flags for main/univpll fixed factors clk: mediatek: clk-mtk: Allow specifying flags on mtk_fixed_factor clocks * clk-trace: clk: Add trace events for rate requests clk: Store clk_core for clk_rate_request * clk-qcom: (69 commits) clk: qcom: rpmh: add support for SM6350 rpmh IPA clock clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: mmcc-msm8974: move clock parent tables down clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: gcc-msm8974: move clock parent tables down clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974 dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register clk: qcom: rpmh: remove usage of platform name clk: qcom: rpmh: rename VRM clock data clk: qcom: rpmh: rename ARC clock data clk: qcom: rpmh: support separate symbol name for the RPMH clocks clk: qcom: rpmh: remove platform names from BCM clocks clk: qcom: rpmh: drop all _ao names clk: qcom: rpmh: reuse common duplicate clocks clk: qcom: rpmh: group clock definitions together clk: qcom: rpm: drop the platform from clock definitions clk: qcom: rpm: drop the _clk suffix completely ... * clk-microchip: clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE clk: microchip: check for null return of devm_kzalloc()