linux/include/net/devlink.h, branch v5.11

devlink: Add blackhole_nexthop trap

2020-11-24T20:14:56Z

Add a packet trap to report packets that were dropped due to a blackhole nexthop. Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

devlink: move flash end and begin to core devlink

2020-11-20T05:41:02Z

When performing a flash update via devlink, device drivers may inform user space of status updates via devlink_flash_update_(begin|end|timeout|status)_notify functions. It is expected that drivers do not send any status notifications unless they send a begin and end message. If a driver sends a status notification without sending the appropriate end notification upon finishing (regardless of success or failure), the current implementation of the devlink userspace program can get stuck endlessly waiting for the end notification that will never come. The current ice driver implementation may send such a status message without the appropriate end notification in rare cases. Fixing the ice driver is relatively simple: we just need to send the begin_notify at the start of the function and always send an end_notify no matter how the function exits. Rather than assuming driver authors will always get this right in the future, lets just fix the API so that it is not possible to get wrong. Make devlink_flash_update_begin_notify and devlink_flash_update_end_notify static, and call them in devlink.c core code. Always send the begin_notify just before calling the driver's flash_update routine. Always send the end_notify just after the routine returns regardless of success or failure. Doing this makes the status notification easier to use from the driver, as it no longer needs to worry about catching failures and cleaning up by calling devlink_flash_update_end_notify. It is now no longer possible to do the wrong thing in this regard. We also save a couple of lines of code in each driver. Signed-off-by: Jacob Keller Acked-by: Vasundhara Volam Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

devlink: move request_firmware out of driver

2020-11-20T05:40:57Z

All drivers which implement the devlink flash update support, with the exception of netdevsim, use either request_firmware or request_firmware_direct to locate the firmware file. Rather than having each driver do this separately as part of its .flash_update implementation, perform the request_firmware within net/core/devlink.c Replace the file_name parameter in the struct devlink_flash_update_params with a pointer to the fw object. Use request_firmware rather than request_firmware_direct. Although most Linux distributions today do not have the fallback mechanism implemented, only about half the drivers used the _direct request, as compared to the generic request_firmware. In the event that a distribution does support the fallback mechanism, the devlink flash update ought to be able to use it to provide the firmware contents. For distributions which do not support the fallback userspace mechanism, there should be essentially no difference between request_firmware and request_firmware_direct. Signed-off-by: Jacob Keller Acked-by: Shannon Nelson Acked-by: Vasundhara Volam Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

devlink: Add enable_remote_dev_reset generic parameter

2020-10-09T19:06:53Z

The enable_remote_dev_reset devlink param flags that the host admin allows device resets that can be initiated by other hosts. This parameter is useful for setups where a device is shared by different hosts, such as multi-host setup. Once the user set this parameter to false, the driver should NACK any attempt to reset the device while the driver is loaded. Signed-off-by: Moshe Shemesh Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

devlink: Add remote reload stats

2020-10-09T19:06:52Z

Add remote reload stats to hold the history of actions performed due devlink reload commands initiated by remote host. For example, in case firmware activation with reset finished successfully but was initiated by remote host. The function devlink_remote_reload_actions_performed() is exported to enable drivers update on remote reload actions performed as it was not initiated by their own devlink instance. Expose devlink remote reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 remote_reload: driver_reinit 0 fw_activate 0 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 remote_reload: driver_reinit 1 fw_activate 1 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 0, "fw_activate": 0, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 1, "fw_activate": 1, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh Reviewed-by: Jakub Kicinski Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

devlink: Add reload stats

2020-10-09T19:06:52Z

Add reload stats to hold the history per reload action type and limit. For example, the number of times fw_activate has been performed on this device since the driver module was added or if the firmware activation was performed with or without reset. Add devlink notification on stats update. Expose devlink reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

devlink: Add devlink reload limit option

2020-10-09T19:06:52Z

Add reload limit to demand restrictions on reload actions. Reload limits supported: no_reset: No reset allowed, no down time allowed, no link flap and no configuration is lost. By default reload limit is unspecified and so no constraints on reload actions are required. Some combinations of action and limit are invalid. For example, driver can not reinitialize its entities without any downtime. The no_reset reload limit will have usecase in this patchset to implement restricted fw_activate on mlx5. Have the uapi parameter of reload limit ready for future support of multiselection. Signed-off-by: Moshe Shemesh Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

devlink: Add reload action option to devlink reload command

2020-10-09T19:06:52Z

Add devlink reload action to allow the user to request a specific reload action. The action parameter is optional, if not specified then devlink driver re-init action is used (backward compatible). Note that when required to do firmware activation some drivers may need to reload the driver. On the other hand some drivers may need to reset the firmware to reinitialize the driver entities. Therefore, the devlink reload command returns the actions which were actually performed. Reload actions supported are: driver_reinit: driver entities re-initialization, applying devlink-param and devlink-resource values. fw_activate: firmware activate. command examples: $devlink dev reload pci/0000:82:00.0 action driver_reinit reload_actions_performed: driver_reinit $devlink dev reload pci/0000:82:00.0 action fw_activate reload_actions_performed: driver_reinit fw_activate Signed-off-by: Moshe Shemesh Reviewed-by: Jakub Kicinski Reviewed-by: Jacob Keller Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

net: devlink: Add support for port regions

2020-10-04T21:38:53Z

Allow regions to be registered to a devlink port. The same netlink API is used, but the port index is provided to indicate when a region is a port region as opposed to a device region. Reviewed-by: Vladimir Oltean Tested-by: Vladimir Oltean Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

devlink: add .trap_group_action_set() callback

2020-10-02T23:31:56Z

Add a new devlink callback, .trap_group_action_set(), which can be used by device drivers which do not support controlling the action (drop, trap) on each trap but rather on the entire group trap. If this new callback is populated, it will take precedence over the .trap_action_set() callback when the user requests a change of all the traps in a group. Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller