linux/include/net/ip.h, branch v4.19

ip: remove tx_flags from ipcm_cookie and use same logic for v4 and v6

2018-07-07T01:58:49Z

skb_shinfo(skb)->tx_flags is derived from sk->sk_tsflags, possibly after modification by __sock_cmsg_send, by calling sock_tx_timestamp. The IPv4 and IPv6 paths do this conversion differently. In IPv4, the individual protocols that support tx timestamps call this function and store the result in ipc.tx_flags. In IPv6, sock_tx_timestamp is called in __ip6_append_data. There is no need to store both tx_flags and ts_flags in the cookie as one is derived from the other. Convert when setting up the cork and remove the redundant field. This is similar to IPv6, only have the conversion happen only once per datagram, in ip(6)_setup_cork. Also change __ip6_append_data to match __ip_append_data. Only update tskey if timestamping is enabled with OPT_ID. The SOCK_.. test is redundant: only valid protocols can have non-zero cork->tx_flags. After this change the IPv4 and IPv6 logic is the same. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

ipv4: ipcm_cookie initializers

2018-07-07T01:58:49Z

Initialize the cookie in one location to reduce code duplication and avoid bugs from inconsistent initialization, such as that fixed in commit 9887cba19978 ("ip: limit use of gso_size to udp"). Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

net: ipv4: listified version of ip_rcv

2018-07-04T05:06:20Z

Also involved adding a way to run a netfilter hook over a list of packets. Rather than attempting to make netfilter know about lists (which would be a major project in itself) we just let it call the regular okfn (in this case ip_rcv_finish()) for any packets it steals, and have it give us back a list of packets it's synchronously accepted (which normally NF_HOOK would automatically call okfn() on, but we want to be able to potentially pass the list to a listified version of okfn().) The netfilter hooks themselves are indirect calls that still happen per- packet (see nf_hook_entry_hookfn()), but again, changing that can be left for future work. There is potential for out-of-order receives if the netfilter hook ends up synchronously stealing packets, as they will be processed before any accepts earlier in the list. However, it was already possible for an asynchronous accept to cause out-of-order receives, so presumably this is considered OK. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

ipv4: add __ip_queue_xmit() that supports tos param

2018-07-04T02:36:54Z

This patch introduces __ip_queue_xmit(), through which the callers can pass tos param into it without having to set inet->tos. For ipv6, ip6_xmit() already allows passing tclass parameter. It's needed when some transport protocol doesn't use inet->tos, like sctp's per transport dscp, which will be added in next patch. Signed-off-by: Xin Long Signed-off-by: David S. Miller

ipv4: support sport, dport and ip_proto in RTM_GETROUTE

2018-05-23T19:14:12Z

This is a followup to fib rules sport, dport and ipproto match support. Only supports tcp, udp and icmp for ipproto. Used by fib rule self tests. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller

udp: generate gso with UDP_SEGMENT

2018-04-26T19:08:04Z

Support generic segmentation offload for udp datagrams. Callers can concatenate and send at once the payload of multiple datagrams with the same destination. To set segment size, the caller sets socket option UDP_SEGMENT to the length of each discrete payload. This value must be smaller than or equal to the relevant MTU. A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a per send call basis. Total byte length may then exceed MTU. If not an exact multiple of segment size, the last segment will be shorter. The implementation adds a gso_size field to the udp socket, ip(v6) cmsg cookie and inet_cork structure to be able to set the value at setsockopt or cmsg time and to work with both lockless and corked paths. Initial benchmark numbers show UDP GSO about as expensive as TCP GSO. tcp tso 3197 MB/s 54232 msg/s 54232 calls/s 6,457,754,262 cycles tcp gso 1765 MB/s 29939 msg/s 29939 calls/s 11,203,021,806 cycles tcp without tso/gso * 739 MB/s 12548 msg/s 12548 calls/s 11,205,483,630 cycles udp 876 MB/s 14873 msg/s 624666 calls/s 11,205,777,429 cycles udp gso 2139 MB/s 36282 msg/s 36282 calls/s 11,204,374,561 cycles [*] after reverting commit 0a6b2a1dc2a2 ("tcp: switch to GSO being always on") Measured total system cycles ('-a') for one core while pinning both the network receive path and benchmark process to that core: perf stat -a -C 12 -e cycles \ ./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4 Note the reduction in calls/s with GSO. Bytes per syscall drops increases from 1470 to 61818. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

udp: expose inet cork to udp

2018-04-26T19:06:46Z

UDP segmentation offload needs access to inet_cork in the udp layer. Pass the struct to ip(6)_make_skb instead of allocating it on the stack in that function itself. This patch is a noop otherwise. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

net: Move fib_convert_metrics to metrics file

2018-04-18T03:41:15Z

Move logic of fib_convert_metrics into ip_metrics_convert. This allows the code that converts netlink attributes into metrics struct to be re-used in a later patch by IPv6. This is mostly a code move with the following changes to variable names: - fi->fib_net becomes net - fc_mx and fc_mx_len are passed as inputs pulled from fib_config - metrics array is passed as an input from fi->fib_metrics->metrics Signed-off-by: David Ahern Signed-off-by: David S. Miller

inet: frags: remove some helpers

2018-04-01T03:25:39Z

Remove sum_frag_mem_limit(), ip_frag_mem() & ip6_frag_mem() Also since we use rhashtable we can bring back the number of fragments in "grep FRAG /proc/net/sockstat /proc/net/sockstat6" that was removed in commit 434d305405ab ("inet: frag: don't account number of fragment queues") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-03-23T15:31:58Z

Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller