linux/include/net/ip_fib.h, branch v5.3

net: Properly update v4 routes with v6 nexthop

2019-09-05T10:35:58Z

When creating a v4 route that uses a v6 nexthop from a nexthop group. Allow the kernel to properly send the nexthop as v6 via the RTA_VIA attribute. Broken behavior: $ ip nexthop add via fe80::9 dev eth0 $ ip nexthop show id 1 via fe80::9 dev eth0 scope link $ ip route add 4.5.6.7/32 nhid 1 $ ip route show default via 10.0.2.2 dev eth0 4.5.6.7 nhid 1 via 254.128.0.0 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 $ Fixed behavior: $ ip nexthop add via fe80::9 dev eth0 $ ip nexthop show id 1 via fe80::9 dev eth0 scope link $ ip route add 4.5.6.7/32 nhid 1 $ ip route show default via 10.0.2.2 dev eth0 4.5.6.7 nhid 1 via inet6 fe80::9 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 $ v2, v3: Addresses code review comments from David Ahern Fixes: dcb1ecb50edf (“ipv4: Prepare for fib6_nh from a nexthop object”) Signed-off-by: Donald Sharp Reviewed-by: David Ahern Signed-off-by: David S. Miller

fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONED

2019-06-24T17:18:48Z

The following patches add back the ability to dump IPv4 and IPv6 exception routes, and we need to allow selection of regular routes or exceptions. Use RTM_F_CLONED as filter to decide whether to dump routes or exceptions: iproute2 passes it in dump requests (except for IPv6 cache flush requests, this will be fixed in iproute2) and this used to work as long as exceptions were stored directly in the FIB, for both IPv4 and IPv6. Caveat: if strict checking is not requested (that is, if the dump request doesn't go through ip_valid_fib_dump_req()), we can't filter on protocol, tables or route types. In this case, filtering on RTM_F_CLONED would be inconsistent: we would fix 'ip route list cache' by returning exception routes and at the same time introduce another bug in case another selector is present, e.g. on 'ip route list cache table main' we would return all exception routes, without filtering on tables. Keep this consistent by applying no filters at all, and dumping both routes and exceptions, if strict checking is not requested. iproute2 currently filters results anyway, and no unwanted results will be presented to the user. The kernel will just dump more data than needed. v7: No changes v6: Rebase onto net-next, no changes v5: New patch: add dump_routes and dump_exceptions flags in filter and simply clear the unwanted one if strict checking is enabled, don't ignore NLM_F_MATCH and don't set filter_set if NLM_F_MATCH is set. Skip filtering altogether if no strict checking is requested: selecting routes or exceptions only would be inconsistent with the fact we can't filter on tables. Signed-off-by: Stefano Brivio Reviewed-by: David Ahern Signed-off-by: David S. Miller

ipv4: Allow routes to use nexthop objects

2019-06-10T17:44:56Z

Add support for RTA_NH_ID attribute to allow a user to specify a nexthop id to use with a route. fc_nh_id is added to fib_config to hold the value passed in the RTA_NH_ID attribute. If a nexthop id is given, the gateway, device, encap and multipath attributes can not be set. Update fib_nh_match to check ids on a route delete. Signed-off-by: David Ahern Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-07T18:00:14Z

Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller

ipv4: Plumb support for nexthop object in a fib_info

2019-06-05T02:26:49Z

Add 'struct nexthop' and nh_list list_head to fib_info. nh_list is the fib_info side of the nexthop <-> fib_info relationship. Add fi_list list_head to 'struct nexthop' to track fib_info entries using a nexthop instance. Add __remove_nexthop_fib and add it to __remove_nexthop to walk the new list_head and mark those fib entries as dead when the nexthop is deleted. Add a few nexthop helpers for use when a nexthop is added to fib_info: - nexthop_cmp to determine if 2 nexthops are the same - nexthop_path_fib_result to select a path for a multipath 'struct nexthop' - nexthop_fib_nhc to select a specific fib_nh_common within a multipath 'struct nexthop' Update existing fib_info_nhc to use nexthop_fib_nhc if a fib_info uses a 'struct nexthop', and mark fib_info_nh as only used for the non-nexthop case. Update the fib_info functions to check for fi->nh and take a different path as needed: - free_fib_info_rcu - put the nexthop object reference - fib_release_info - remove the fib_info from the nexthop's fi_list - nh_comp - use nexthop_cmp when either fib_info references a nexthop object - fib_info_hashfn - use the nexthop id for the hashing vs the oif of each fib_nh in a fib_info - fib_nlmsg_size - add space for the RTA_NH_ID attribute - fib_create_info - verify nexthop reference can be taken, verify nexthop spec is valid for fib entry, and add fib_info to fi_list for a nexthop - fib_select_multipath - use the new nexthop_path_fib_result to select a path when nexthop objects are used - fib_table_lookup - if the 'struct nexthop' is a blackhole nexthop, treat it the same as a fib entry using 'blackhole' The bulk of the changes are in fib_semantics.c and most of that is moving the existing change_nexthops into an else branch. Update the nexthop code to walk fi_list on a nexthop deleted to remove fib entries referencing it. Signed-off-by: David Ahern Signed-off-by: David S. Miller

ipv4: Prepare for fib6_nh from a nexthop object

2019-06-05T02:26:49Z

Convert more IPv4 code to use fib_nh_common over fib_nh to enable routes to use a fib6_nh based nexthop. In the end, only code not using a nexthop object in a fib_info should directly access fib_nh in a fib_info without checking the famiy and going through fib_nh_common. Those functions will be marked when it is not directly evident. Signed-off-by: David Ahern Signed-off-by: David S. Miller

ipv4: Use accessors for fib_info nexthop data

2019-06-05T02:26:49Z

Use helpers to access fib_nh and fib_nhs fields of a fib_info. Drop the fib_dev macro which is an alias for the first nexthop. Replacements: fi->fib_dev --> fib_info_nh(fi, 0)->fib_nh_dev fi->fib_nh --> fib_info_nh(fi, 0) fi->fib_nh[i] --> fib_info_nh(fi, i) fi->fib_nhs --> fib_info_num_path(fi) where fib_info_nh(fi, i) returns fi->fib_nh[nhsel] and fib_info_num_path returns fi->fib_nhs. Move the existing fib_info_nhc to nexthop.h and define the new ones there. A later patch adds a check if a fib_info uses a nexthop object, and defining the helpers in nexthop.h avoid circular header dependencies. After this all remaining open coded references to fi->fib_nhs and fi->fib_nh are in: - fib_create_info and helpers used to lookup an existing fib_info entry, and - the netdev event functions fib_sync_down_dev and fib_sync_up. The latter two will not be reused for nexthops, and the fib_create_info will be updated to handle a nexthop in a fib_info. Signed-off-by: David Ahern Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

ipv4: Rename and export nh_update_mtu

2019-05-23T00:48:44Z

Rename nh_update_mtu to fib_nhc_update_mtu and export for use by the nexthop code. Signed-off-by: David Ahern Signed-off-by: David S. Miller

ipv4: export fib_info_update_nh_saddr

2019-05-23T00:48:44Z

Add scope as input argument versus relying on fib_info reference in fib_nh, and export fib_info_update_nh_saddr. Signed-off-by: David Ahern Signed-off-by: David S. Miller