linux/include/net/netns, branch v5.5

netfilter: nf_tables: autoload modules from the abort path

2020-01-24T19:54:29Z

This patch introduces a list of pending module requests. This new module list is composed of nft_module_request objects that contain the module name and one status field that tells if the module has been already loaded (the 'done' field). In the first pass, from the preparation phase, the netlink command finds that a module is missing on this list. Then, a module request is allocated and added to this list and nft_request_module() returns -EAGAIN. This triggers the abort path with the autoload parameter set on from nfnetlink, request_module() is called and the module request enters the 'done' state. Since the mutex is released when loading modules from the abort phase, the module list is zapped so this is iteration occurs over a local list. Therefore, the request_module() calls happen when object lists are in consistent state (after fulling aborting the transaction) and the commit list is empty. On the second pass, the netlink command will find that it already tried to load the module, so it does not request it again and nft_request_module() returns 0. Then, there is a look up to find the object that the command was missing. If the module was successfully loaded, the command proceeds normally since it finds the missing object in place, otherwise -ENOENT is reported to userspace. This patch also updates nfnetlink to include the reason to enter the abort phase, which is required for this new autoload module rationale. Fixes: ec7470b834fe ("netfilter: nf_tables: store transaction list locally while requesting module") Reported-by: syzbot+29125d208b3dae9a7019@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso

ipv6: keep track of routes using src

2019-11-21T22:45:55Z

Use a per namespace counter, increment it on successful creation of any route using the source address, decrement it on deletion of such routes. This allows us to check easily if the routing decision in the current namespace depends on the packet source. Will be used by the next patch. Suggested-by: David Ahern Signed-off-by: Paolo Abeni Reviewed-by: David Ahern Signed-off-by: David S. Miller

sctp: add support for Primary Path Switchover

2019-11-08T22:18:32Z

This is a new feature defined in section 5 of rfc7829: "Primary Path Switchover". By introducing a new tunable parameter: Primary.Switchover.Max.Retrans (PSMR) The primary path will be changed to another active path when the path error counter on the old primary path exceeds PSMR, so that "the SCTP sender is allowed to continue data transmission on a new working path even when the old primary destination address becomes active again". This patch is to add this tunable parameter, 'ps_retrans' per netns, sock, asoc and transport. It also allows a user to change ps_retrans per netns by sysctl, and ps_retrans per sock/asoc/transport will be initialized with it. The check will be done in sctp_do_8_2_transport_strike() when this feature is enabled. Note this feature is disabled by initializing 'ps_retrans' per netns as 0xffff by default, and its value can't be less than 'pf_retrans' when changing by sysctl. v3->v4: - add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of sysctl 'ps_retrans'. - add a new entry for ps_retrans on ip-sysctl.txt. Signed-off-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller

sctp: add pf_expose per netns and sock and asoc

2019-11-08T22:18:32Z

As said in rfc7829, section 3, point 12: The SCTP stack SHOULD expose the PF state of its destination addresses to the ULP as well as provide the means to notify the ULP of state transitions of its destination addresses from active to PF, and vice versa. However, it is recommended that an SCTP stack implementing SCTP-PF also allows for the ULP to be kept ignorant of the PF state of its destinations and the associated state transitions, thus allowing for retention of the simpler state transition model of [RFC4960] in the ULP. Not only does it allow to expose the PF state to ULP, but also allow to ignore sctp-pf to ULP. So this patch is to add pf_expose per netns, sock and asoc. And in sctp_assoc_control_transport(), ulp_notify will be set to false if asoc->expose is not 'enabled' in next patch. It also allows a user to change pf_expose per netns by sysctl, and pf_expose per sock and asoc will be initialized with it. Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt, to not allow a user to query the state of a sctp-pf peer address when pf_expose is 'disabled', as said in section 7.3. v1->v2: - Fix a build warning noticed by Nathan Chancellor. v2->v3: - set pf_expose to UNUSED by default to keep compatible with old applications. v3->v4: - add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested. - change this patch to 1/5, and move sctp_assoc_control_transport change into 2/5, as Marcelo suggested. - use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested. Signed-off-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller

net/tls: add skeleton of MIB statistics

2019-10-05T23:29:00Z

Add a skeleton structure for adding TLS statistics. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

can: netns: remove "can_" prefix from members struct netns_can

2019-09-04T11:29:14Z

This patch improves the code reability by removing the redundant "can_" prefix from the members of struct netns_can (as the struct netns_can itself is the member "can" of the struct net.) The conversion is done with: sed -i \ -e "s/struct can_dev_rcv_lists \*can_rx_alldev_list;/struct can_dev_rcv_lists *rx_alldev_list;/" \ -e "s/spinlock_t can_rcvlists_lock;/spinlock_t rcvlists_lock;/" \ -e "s/struct timer_list can_stattimer;/struct timer_list stattimer; /" \ -e "s/can\.can_rx_alldev_list/can.rx_alldev_list/g" \ -e "s/can\.can_rcvlists_lock/can.rcvlists_lock/g" \ -e "s/can\.can_stattimer/can.stattimer/g" \ include/net/netns/can.h \ net/can/*.[ch] Signed-off-by: Oleksij Rempel Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: netns: give members of struct netns_can holding the statistics a sensible name

2019-09-04T11:29:13Z

This patch gives the members of the struct netns_can that are holding the statistics a sensible name, by renaming struct netns_can::can_stats into struct netns_can::pkg_stats and struct netns_can::can_pstats into struct netns_can::rcv_lists_stats. The conversion is done with: sed -i \ -e "s:\(struct[^*]*\*\)can_stats;.*:\1pkg_stats;:" \ -e "s:\(struct[^*]*\*\)can_pstats;.*:\1rcv_lists_stats;:" \ -e "s/can\.can_stats/can.pkg_stats/g" \ -e "s/can\.can_pstats/can.rcv_lists_stats/g" \ net/can/*.[ch] \ include/net/netns/can.h Signed-off-by: Oleksij Rempel Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: netns: give structs holding the CAN statistics a sensible name

2019-09-04T11:29:13Z

This patch renames both "struct s_stats" and "struct s_pstats", to "struct can_pkg_stats" and "struct can_rcv_lists_stats" to better reflect their meaning and improve code readability. The conversion is done with: sed -i \ -e "s/struct s_stats/struct can_pkg_stats/g" \ -e "s/struct s_pstats/struct can_rcv_lists_stats/g" \ net/can/*.[ch] \ include/net/netns/can.h Signed-off-by: Oleksij Rempel Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

sctp: make ecn flag per netns and endpoint

2019-08-28T03:54:14Z

This patch is to add ecn flag for both netns_sctp and sctp_endpoint, net->sctp.ecn_enable is set 1 by default, and ep->ecn_enable will be initialized with net->sctp.ecn_enable. asoc->peer.ecn_capable will be set during negotiation only when ep->ecn_enable is set on both sides. Signed-off-by: Xin Long Signed-off-by: David S. Miller

tcp: add new tcp_mtu_probe_floor sysctl

2019-08-09T20:03:30Z

The current implementation of TCP MTU probing can considerably underestimate the MTU on lossy connections allowing the MSS to get down to 48. We have found that in almost all of these cases on our networks these paths can handle much larger MTUs meaning the connections are being artificially limited. Even though TCP MTU probing can raise the MSS back up we have seen this not to be the case causing connections to be "stuck" with an MSS of 48 when heavy loss is present. Prior to pushing out this change we could not keep TCP MTU probing enabled b/c of the above reasons. Now with a reasonble floor set we've had it enabled for the past 6 months. The new sysctl will still default to TCP_MIN_SND_MSS (48), but gives administrators the ability to control the floor of MSS probing. Signed-off-by: Josh Hunt Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Signed-off-by: David S. Miller