linux/include/scsi, branch v2.6.32

[SCSI] fix async scan add/remove race resulting in an oops

2009-11-26T15:43:39Z

Async scanning introduced a very wide window where the SCSI device is up and running but has not yet been added to sysfs. We delay the adding until all scans have completed to retain the same ordering as sync scanning. This delay in visibility causes an oops if a device is removed before we make it visible because the SCSI removal routines have an inbuilt assumption that if a device is in SDEV_RUNNING state, it must be visible (which is not necessarily true in the async scanning case). Fix this by introducing an additional is_visible flag which we can use to condition the tear down so we do the right thing for running but not yet made visible. Reported-by: Alexey Kuznetsov Signed-off-by: James Bottomley

[SCSI] Fix incorrect reporting of host protection capabilities

2009-11-06T17:50:52Z

The advent of DIF Type 2 devices exposed some missing break statements in the protection mask switch constructs. However, rewriting the code to use an index into a small static array seemed like a more elegant solution. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley

[SCSI] libiscsi: iscsi_session_setup to allow for private space

2009-10-02T19:01:39Z

This patch contains changes that allow iscsi_session_setup to allocate private space for LLD's Signed-off-by: Jayamohan Kallickal Acked-by: Mike Christie Signed-off-by: James Bottomley

[SCSI] sd: Support disks formatted with DIF Type 2

2009-10-02T14:47:04Z

Disks formatted with DIF Type 2 reject READ/WRITE 6/10/12/16 commands when protection is enabled. Only the 32-byte variants are supported. Implement support for issusing 32-byte READ/WRITE and enable Type 2 drives in the protection type detection logic. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley

[SCSI] sd: Detach DIF from block integrity infrastructure

2009-10-02T14:46:39Z

So far we have only issued DIF commands if CONFIG_BLK_DEV_INTEGRITY is enabled. However, communication between initiator and target should be independent of protection information DMA. There are DIF-only host adapters coming out that will be able to take advantage of this. Move the relevant DIF bits to sd.c. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley

[SCSI] Deprecate SCSI_PROT_*_CONVERT operations

2009-10-02T14:46:25Z

The checksum format is orthogonal to whether the protection information is being passed on beyond the HBA or not. It is perfectly valid to use a non-T10 CRC with WRITE_STRIP and READ_INSERT. Consequently it no longer makes sense to explicitly refer to the conversion in the protection operation. Update sd_dif and lpfc accordingly. Signed-off-by: Martin K. Petersen Acked-by: Ihab Hamadi Signed-off-by: James Bottomley

trivial: remove unnecessary semicolons

2009-09-21T13:14:58Z

Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina

[SCSI] libiscsi, bnx2i: make bound ep check common

2009-09-12T14:35:33Z

bnx2i currently has a check for if a ep is properly bound, so if iscsi_queuecommand/xmit_task is called while there is no ep we will not queue IO. be2iscsi sends IO from queuecommand/xmit_task like how bnx2i does and needs a similar test. This patch has us just use the suspend_bit test for this. When ep_poll has succeeed iscsid will call conn_bind, the LLD will then call iscsi_conn_bind which will clear the suspend bit. When ep_disconnect is called (or if there is a conn error) we set the suspend bit. For the ep_disconnect case I am adding a helper in this patch that will take the session lock to make sure iscsi_queuecommand/xmit_task is not running and it will set the suspend bit. Signed-off-by: Mike Christie Signed-off-by: Jayamohan Kallickal Signed-off-by: James Bottomley

[SCSI] libiscsi: add completion function for drivers that do not need pdu processing

2009-09-12T14:35:33Z

beiscsi does not need the iscsi scsi cmd processing. It does not even get this info on the completion path. This adds a function to just update the sequencing numbers and complete a task. Signed-off-by: Mike Christie Signed-off-by: Jayamohan Kallickal Signed-off-by: James Bottomley

[SCSI] libfc: send GPN_ID in reaction to single-port RSCNs.

2009-09-10T17:08:03Z

When an RSCN indicates changes to individual remote ports, don't blindly log them out and then back in. Instead, determine whether they're still in the directory, by doing GPN_ID. If that is successful, call login, which will send ADISC and reverify, otherwise, call logoff. Perhaps we should just delete the rport, not send LOGO, but it seems safer. Also, fix a possible issue where if a mix of records in the RSCN cause us to queue disc_ports for disc_single and then we decide to do full rediscovery, we leak memory for those disc_ports queued. So, go through the list of disc_ports even if doing full discovery. Free the disc_ports in any case. If any of the disc_single() calls return error, do a full discovery. The ability to fill in GPN_ID requests was added to fc_ct_fill(). For this, it needs the FC_ID to be passed in as an arg. The did parameter for fc_elsct_send() is used for that, since the actual D_DID will always be 0xfffffc for all CT requests so far. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley