linux/include/scsi, branch v5.4

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-10-15T19:19:08Z

Pull SCSI fixes from James Bottomley: "Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS (qla2xxx) and two in the core. The last two are mostly about removing incorrect messages from the kernel log: the resid message is definitely wrong and the sync cache on protected drive problem is arguably wrong" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Update qla2xxx driver scsi: zfcp: fix reaction on bit error threshold notification scsi: core: save/restore command resid for error handling scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry() scsi: sd: Ignore a failure to sync cache due to lack of authorization

scsi: core: save/restore command resid for error handling

2019-10-04T01:43:04Z

When a non-passthrough command is terminated with CHECK CONDITION, request sense is executed by hijacking the command descriptor. Since scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the original command resid, the value returned on failure of the original command is lost and replaced with the value set by the execution of the request sense command. This value may in many instances be unaligned to the device sector size, causing sd_done() to print a warning message about the incorrect unaligned resid before the command is retried. Fix this problem by saving the original command residual in struct scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in scsi_eh_restore_cmnd(). In addition, to make sure that the request sense command is executed with a correctly initialized command structure, also reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original command value in struct scsi_eh_save. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-09-21T17:50:15Z

Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi, lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The only core change this time around is the addition of request batching for virtio. Since batching requires an additional flag to use, it should be invisible to the rest of the drivers" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits) scsi: hisi_sas: Fix the conflict between device gone and host reset scsi: hisi_sas: Add BIST support for phy loopback scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation scsi: hisi_sas: Remove some unused function arguments scsi: hisi_sas: Remove redundant work declaration scsi: hisi_sas: Remove hisi_sas_hw.slot_complete scsi: hisi_sas: Assign NCQ tag for all NCQ commands scsi: hisi_sas: Update all the registers after suspend and resume scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset() scsi: hisi_sas: add debugfs auto-trigger for internal abort time out scsi: virtio_scsi: unplug LUNs when events missed scsi: scsi_dh_rdac: zero cdb in send_mode_select() scsi: fcoe: fix null-ptr-deref Read in fc_release_transport scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code scsi: ufs: Use kmemdup in ufshcd_read_string_desc() ...

scsi: core: Reduce memory required for SCSI logging

2019-08-08T01:47:29Z

The data structure used for log messages is so large that it can cause a boot failure. Since allocations from that data structure can fail anyway, use kmalloc() / kfree() instead of that data structure. See also https://bugzilla.kernel.org/show_bug.cgi?id=204119. See also commit ded85c193a39 ("scsi: Implement per-cpu logging buffer") # v4.0. Reported-by: Jan Palus Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: Ming Lei Cc: Jan Palus Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure

2019-07-30T01:12:35Z

Gcc-9 complains for a memset across pointer boundaries, which happens as the code tries to allocate a flexible array on the stack. Turns out we cannot do this without relying on gcc-isms, so with this patch we'll embed the fc_rport_priv structure into fcoe_rport, can use the normal 'container_of' outcast, and will only have to do a memset over one structure. Signed-off-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

scsi: libfc: Whitespace cleanup in libfc.h

2019-07-30T00:43:06Z

No functional change. [mkp: typo] Signed-off-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: fcoe: fix a typo

2019-07-24T02:14:06Z

#define relative to FCOE CTLR start with FCOE_CTLR, except FCOE_CTRL_SOL_TOV. This is likely a typo and CTRL should be CTLR here as well. Signed-off-by: Christophe JAILLET Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

scsi: core: add support for request batching

2019-07-22T20:44:07Z

This allows a list of requests to be issued, with the LLD only writing the hardware doorbell when necessary, after the last request was prepared. This is more efficient if we have lists of requests to issue, particularly on virtualized hardware, where writing the doorbell is more expensive than on real hardware. The use case for this is plugged IO, where blk-mq flushes a batch of requests all at once. The API is the same as for blk-mq, just with blk-mq concepts tweaked to fit the SCSI subsystem API: the "last" flag in blk_mq_queue_data becomes a flag in scsi_cmnd, while the queue_num in the commit_rqs callback is extracted from the hctx and passed as a parameter. The only complication is that blk-mq uses different plugging heuristics depending on whether commit_rqs is present or not. So we have two different sets of blk_mq_ops and pick one depending on whether the scsi_host template uses commit_rqs or not. Signed-off-by: Paolo Bonzini Reviewed-by: Bart Van Assche Reviewed-by: Ming Lei Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-07-20T17:04:58Z

Pull SCSI fixes from James Bottomley: "This is the final round of mostly small fixes in our initial submit. It's mostly minor fixes and driver updates. The only change of note is adding a virt_boundary_mask to the SCSI host and host template to parametrise this for NVMe devices instead of having them do a call in slave_alloc. It's a fairly straightforward conversion except in the two NVMe handling drivers that didn't set it who now have a virtual infinity parameter added" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: megaraid_sas: set an unlimited max_segment_size scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs scsi: IB/srp: set virt_boundary_mask in the scsi host scsi: IB/iser: set virt_boundary_mask in the scsi host scsi: storvsc: set virt_boundary_mask in the scsi host template scsi: ufshcd: set max_segment_size in the scsi host template scsi: core: take the DMA max mapping size into account scsi: core: add a host / host template field for the virt boundary scsi: core: Fix race on creating sense cache scsi: sd_zbc: Fix compilation warning scsi: libfc: fix null pointer dereference on a null lport scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized scsi: zfcp: fix request object use-after-free in send path causing wrong traces scsi: zfcp: fix request object use-after-free in send path causing seqno errors scsi: megaraid_sas: Update driver version to 07.710.50.00 scsi: megaraid_sas: Add module parameter for FW Async event logging scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers scsi: megaraid_sas: Fix calculation of target ID scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade ...

scsi: core: add a host / host template field for the virt boundary

2019-07-17T03:01:49Z

This allows drivers setting it up easily instead of branching out to block layer calls in slave_alloc, and ensures the upgraded max_segment_size setting gets picked up by the DMA layer. Signed-off-by: Christoph Hellwig Acked-by: Kashyap Desai < kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen