linux/include/scsi, branch v6.8

scsi: core: Consult supported VPD page list prior to fetching page

2024-02-15T19:41:26Z

Commit c92a6b5d6335 ("scsi: core: Query VPD size before getting full page") removed the logic which checks whether a VPD page is present on the supported pages list before asking for the page itself. That was done because SPC helpfully states "The Supported VPD Pages VPD page list may or may not include all the VPD pages that are able to be returned by the device server". Testing had revealed a few devices that supported some of the 0xBn pages but didn't actually list them in page 0. Julian Sikorski bisected a problem with his drive resetting during discovery to the commit above. As it turns out, this particular drive firmware will crash if we attempt to fetch page 0xB9. Various approaches were attempted to work around this. In the end, reinstating the logic that consults VPD page 0 before fetching any other page was the path of least resistance. A firmware update for the devices which originally compelled us to remove the check has since been released. Link: https://lore.kernel.org/r/20240214221411.2888112-1-martin.petersen@oracle.com Fixes: c92a6b5d6335 ("scsi: core: Query VPD size before getting full page") Cc: stable@vger.kernel.org Cc: Bart Van Assche Reported-by: Julian Sikorski Tested-by: Julian Sikorski Reviewed-by: Lee Duncan Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: sd: usb_storage: uas: Access media prior to querying device properties

2024-02-14T17:46:47Z

It has been observed that some USB/UAS devices return generic properties hardcoded in firmware for mode pages for a period of time after a device has been discovered. The reported properties are either garbage or they do not accurately reflect the characteristics of the physical storage device attached in the case of a bridge. Prior to commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") we would call revalidate several times during device discovery. As a result, incorrect values would eventually get replaced with ones accurately describing the attached storage. When we did away with the redundant revalidate pass, several cases were reported where devices reported nonsensical values or would end up in write-protected state. An initial attempt at addressing this issue involved introducing a delayed second revalidate invocation. However, this approach still left some devices reporting incorrect characteristics. Tasos Sahanidis debugged the problem further and identified that introducing a READ operation prior to MODE SENSE fixed the problem and that it wasn't a timing issue. Issuing a READ appears to cause the devices to update their state to reflect the actual properties of the storage media. Device properties like vendor, model, and storage capacity appear to be correctly reported from the get-go. It is unclear why these devices defer populating the remaining characteristics. Match the behavior of a well known commercial operating system and trigger a READ operation prior to querying device characteristics to force the device to populate the mode pages. The additional READ is triggered by a flag set in the USB storage and UAS drivers. We avoid issuing the READ for other transport classes since some storage devices identify Linux through our particular discovery command sequence. Link: https://lore.kernel.org/r/20240213143306.2194237-1-martin.petersen@oracle.com Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") Cc: stable@vger.kernel.org Reported-by: Tasos Sahanidis Reviewed-by: Ewan D. Milne Reviewed-by: Bart Van Assche Tested-by: Tasos Sahanidis Signed-off-by: Martin K. Petersen

scsi: sd: Fix system start for ATA devices

2023-11-25T01:44:21Z

It is not always possible to keep a device in the runtime suspended state when a system level suspend/resume cycle is executed. E.g. for ATA devices connected to AHCI adapters, system resume resets the ATA ports, which causes connected devices to spin up. In such case, a runtime suspended disk will incorrectly be seen with a suspended runtime state because the device is not resumed by sd_resume_system(). The power state seen by the user is different than the actual device physical power state. Fix this issue by introducing the struct scsi_device flag force_runtime_start_on_system_start. When set, this flag causes sd_resume_system() to request a runtime resume operation for runtime suspended devices. This results in the user seeing the device runtime_state as active after a system resume, thus correctly reflecting the device physical power state. Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary") Cc: Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org Signed-off-by: Martin K. Petersen

scsi: Change SCSI device boolean fields to single bit flags

2023-11-25T01:44:21Z

Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") changed the single bit manage_start_stop flag into 2 boolean fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") introduced the manage_shutdown boolean field for the same structure. Together, these 2 commits increase the size of struct scsi_device by 8 bytes by using booleans instead of defining the manage_xxx fields as single bit flags, similarly to other flags of this structure. Avoid this unnecessary structure size increase and be consistent with the definition of other flags by reverting the definitions of the manage_xxx fields as single bit flags. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") Cc: Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org Reviewed-by: Niklas Cassel Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-11-03T01:13:50Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc, scsi_debug) plus the usual assorted minor fixes and updates. The major change this time around is a prep patch for rethreading of the driver reset handler API not to take a scsi_cmd structure which starts to reduce various drivers' dependence on scsi_cmd in error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits) scsi: ufs: core: Leave space for '\0' in utf8 desc string scsi: ufs: core: Conversion to bool not necessary scsi: ufs: core: Fix race between force complete and ISR scsi: megaraid: Fix up debug message in megaraid_abort_and_reset() scsi: aic79xx: Fix up NULL command in ahd_done() scsi: message: fusion: Initialize return value in mptfc_bus_reset() scsi: mpt3sas: Fix loop logic scsi: snic: Remove useless code in snic_dr_clean_pending_req() scsi: core: Add comment to target_destroy in scsi_host_template scsi: core: Clean up scsi_dev_queue_ready() scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler() scsi: target: core: Fix kernel-doc comment scsi: pmcraid: Fix kernel-doc comment scsi: core: Handle depopulation and restoration in progress scsi: ufs: core: Add support for parsing OPP scsi: ufs: core: Add OPP support for scaling clocks and regulators scsi: ufs: dt-bindings: common: Add OPP table scsi: scsi_debug: Add param to control sdev's allow_restart scsi: scsi_debug: Add debugfs interface to fail target reset scsi: scsi_debug: Add new error injection type: Reset LUN failed ...

Merge tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-11-01T22:50:12Z

Pull ATA updates from Damien Le Moal: - Modify the AHCI driver to print the link power management policy used on scan, to help with debugging issues (Niklas) - Add support for the ASM2116 series adapters to the AHCI driver (Szuying) - Prepare libata for the coming gcc and Clang __counted_by attribute (Kees) - Following the recent estensive fixing of libata suspend/resume handling, several patches further cleanup and improve disk power state management (me) - Reduce the verbosity of some error messages for non-fatal temporary errors, e.g. slow response to device reset when scanning a port, and warning messages that are in fact normal, e.g. disabling a device on suspend or when removing it (me) - Cleanup DMA helper functions (me) - Fix sata_mv drive handling of potential errors durring probe (Ma) - Cleanup the xgene and imx drivers using the functions of_device_get_match_data() and device_get_match_data() (Rob) - Improve the tegra driver device tree (Rob) * tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (22 commits) dt-bindings: ata: tegra: Disallow undefined properties ata: libata-core: Improve ata_dev_power_set_active() ata: libata-eh: Spinup disk on resume after revalidation ata: imx: Use device_get_match_data() ata: xgene: Use of_device_get_match_data() ata: sata_mv: aspeed: fix value check in mv_platform_probe() ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list ata: libata: Cleanup inline DMA helper functions ata: libata-eh: Reduce "disable device" message verbosity ata: libata-eh: Improve reset error messages ata: libata-sata: Improve ata_sas_slave_configure() ata: libata-core: Do not resume runtime suspended ports ata: libata-core: Do not poweroff runtime suspended ports ata: libata-core: Remove ata_port_resume_async() ata: libata-core: Remove ata_port_suspend_async() ata: libata-core: Detach a port devices on shutdown ata: libata-core: Synchronize ata_port_detach() with hotplug ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat() scsi: Remove scsi device no_start_on_resume flag ata: libata: Annotate struct ata_cpr_log with __counted_by ...

scsi: sd: Introduce manage_shutdown device flag

2023-10-27T01:00:19Z

Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") change setting the manage_system_start_stop flag to false for libata managed disks to enable libata internal management of disk suspend/resume. However, a side effect of this change is that on system shutdown, disks are no longer being stopped (set to standby mode with the heads unloaded). While this is not a critical issue, this unclean shutdown is not recommended and shows up with increased smart counters (e.g. the unexpected power loss counter "Unexpect_Power_Loss_Ct"). Instead of defining a shutdown driver method for all ATA adapter drivers (not all of them define that operation), this patch resolves this issue by further refining the sd driver start/stop control of disks using the new flag manage_shutdown. If this new flag is set to true by a low level driver, the function sd_shutdown() will issue a START STOP UNIT command with the start argument set to 0 when a disk needs to be powered off (suspended) on system power off, that is, when system_state is equal to SYSTEM_POWER_OFF. Similarly to the other manage_xxx flags, the new manage_shutdown flag is exposed through sysfs as a read-write device attribute. To avoid any confusion between manage_shutdown and manage_system_start_stop, the comments describing these flags in include/scsi/scsi.h are also improved. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038 Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/ Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Reviewed-by: Hannes Reinecke Reviewed-by: James Bottomley Acked-by: Martin K. Petersen

scsi: core: Add comment to target_destroy in scsi_host_template

2023-10-25T02:31:04Z

Add comment to indicate that the callback function target_destroy in the scsi_host_template must not sleep. Signed-off-by: Wenchao Hao Link: https://lore.kernel.org/r/20231018113746.1940197-3-haowenchao2@huawei.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: Remove scsi device no_start_on_resume flag

2023-10-03T00:39:49Z

The scsi device flag no_start_on_resume is not set by any scsi low level driver. Remove it. This reverts the changes introduced by commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume"). Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Chia-Lin Kao (AceLan) Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen

Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-09-29T20:38:34Z

Pull ATA fixes from Damien Le Moal: "A larger than usual set of fixes for 6.6-rc4 due to the unexpected number of fixes needed to address ATA disks suspend/resume issues. In more detail: - Add missing additionalProperties on child nodes to the pata-common DT bindings (Rob) - Fix handling of the REPORT SUPPORTED OPERATION CODES command to ignore reserved bits (Niklas) - Increase port multiplier soft reset timeout to accomodate slow devices and avoid issues on wakeup (Matthias) - A couple of minor code fixes to avoid compilation warnings in libata-core and libata-eh (me) - Many patches from me to address suspend/resume issues, and in particular a potential deadlock on resume due to the SCSI disk driver resume operation not being synchronized with libata EH port resume handling. This is addressed by changing the scsi disk driver disk start/stop control to allow libata to execute disk suspend (spin down) and resume (spin up) on its own during system suspend/resume. Runtime suspend/resume control remains with the SCSI disk driver. Other fixes include: - Fix libata power management request issuing to avoid races - Establish a link between ATA ports and SCSI devices to order PM operations - Fix device removal to avoid issues with driver rmmod removal - Fix synchronization of libata device rescan and SCSI disk resume operation - Remove libsas PM operations as suspend/resume is handled directly by the sas controller resume - Fix the SCSI disk driver to not issue commands to suspended disks, thus avoiding potential system lock-up on resume" * tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-eh: Fix compilation warning in ata_eh_link_report() ata: libata-core: Fix compilation warning in ata_dev_config_ncq() scsi: sd: Do not issue commands to suspended disks on shutdown ata: libata-core: Do not register PM operations for SAS ports ata: libata-scsi: Fix delayed scsi_rescan_device() execution scsi: Do not attempt to rescan suspended devices ata: libata-scsi: Disable scsi device manage_system_start_stop scsi: sd: Differentiate system and runtime start/stop management ata: libata-scsi: link ata port and scsi device ata: libata-core: Fix port and device removal ata: libata-core: Fix ata_port_request_pm() locking ata: libata-sata: increase PMP SRST timeout to 10s ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes