linux/include/sound/sof, branch v5.17

ipc: debug: Add shared memory heap to memory scan

2021-12-17T11:06:19Z

Newly added shared heap zones should be taken into account during memory usage scanning. Reviewed-by: Kai Vehmanen Reviewed-by: Liam Girdwood Signed-off-by: Karol Trzcinski Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20211216232422.345164-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: IPC: dai: Expand DAI_CONFIG IPC flags

2021-11-26T13:24:24Z

Some DAI components, such as HDaudio, need to be stopped in two steps a) stop the DAI component b) stop the DAI DMA This patch enables this two-step stop by expanding the DAI_CONFIG IPC flags and split them into 2 parts. The 4 LSB bits indicate when the DAI_CONFIG IPC is sent, ex: hw_params, hw_free or pause. The 4 MSB bits are used as the quirk flags to be used along with the command flags. The quirk flag called SOF_DAI_CONFIG_FLAGS_2_STEP_STOP shall be set along with the HW_PARAMS command flag, i.e. before the pipeline is started so that the stop/pause trigger op in the FW can take the appropriate action to either perform/skip the DMA stop. If set, the DMA stop will be executed when the DAI_CONFIG IPC is sent during hw_free. In the case of pause, DMA pause will be handled when the DAI_CONFIG IPC is sent with the PAUSE command flag. Along with this, modify the signature for the hda_ctrl_dai_widget_setup/ hda_ctrl_dai_widget_free() functions to take additional flags as an argument and modify all users to pass the appropriate quirk flags. Only the HDA DAI's need to pass the SOF_DAI_CONFIG_FLAGS_2_STEP_STOP quirk flag during hw_params to indicate that it supports two-step stop and pause. Signed-off-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Signed-off-by: Kai Vehmanen Link: https://lore.kernel.org/r/20211125101520.291581-10-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: topology: Add support for Mediatek AFE DAI

2021-11-18T13:57:37Z

Add new sof dai and config to pass topology file configuration to SOF firmware running on Mediatek platform DSP core. Add mediatek audio front end(AFE) to the list of supported sof_dais Signed-off-by: YC Hung Reviewed-by: Péter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Reviewed-by: Daniel Baluta Signed-off-by: Daniel Baluta Link: https://lore.kernel.org/r/20211118100749.54628-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown

ASoC: SOF: topology: Add support for AMD ACP DAIs

2021-11-17T17:35:54Z

Add new sof dais and config to pass topology file configuration to SOF firmware running on ACP's DSP core. ACP firmware support I2S_BT, I2S_SP and DMIC controller hence add three new dais to the list of supported sof_dais Signed-off-by: Ajit Kumar Pandey Reviewed-by: Bard Liao Reviewed-by: Kai Vehmanen Signed-off-by: Daniel Baluta Link: https://lore.kernel.org/r/20211117093734.17407-12-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown

ASoC: SOF: IPC: Add new IPC command to free trace DMA

2021-11-15T13:26:46Z

Add a new SOF_IPC_TRACE_DMA_FREE IPC command to stop and free trace DMA in the FW. Signed-off-by: Ranjani Sridharan Reviewed-by: Kai Vehmanen Reviewed-by: Pierre-Louis Bossart Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20211102101019.14037-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: dai-intel: add SOF_DAI_INTEL_SSP_CLKCTRL_MCLK/BCLK_ES bits

2021-10-05T12:08:13Z

Add two clks_control bits. MCLK and/or BCLK will start during hw_params and stop during hw_free if the corresponding bit is set. While the kernel does not do anything with these bitfields, this is also tagged as part of the ABI 3.19 changes. Signed-off-by: Bard Liao Signed-off-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Guennadi Liakhovetski Reviewed-by: Brent Lu Link: https://lore.kernel.org/r/20211004171430.103674-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: dai: include new flags for DAI_CONFIG

2021-10-05T12:08:11Z

Mirror changes done in SOF tree. The changes do not rely on BIT/GENMASK on purpose to keep the structure and flags common with the firmware tree. The DAI_CONFIG IPC is currently used in multiple ways. It is sent to the DSP firmware when enabling static or dynamic pipelines, in hw_params or prepare callbacks for Intel SSP, HDaudio and ALH, on trigger_stop and hw_free. This IPC has been abused a bit in the past, i.e. the values used for some of the DAI-specific fields are used to either allocate or free resources. Two typical examples are Intel HDaudio and SoundWire/ALH DAIs, where using a zero DMA channel number or stream tag signals to the firmware the DMA channels or tags allocated earlier can be freed. Rather than add a new IPC for 'hw_params' and 'hw_free', this patch suggests supporting a 2-bit value conveying the 'stage' information in an existing IPC structure. Only 3 possible values are used. The mapping between HW_PARAMS and HW_FREE flags and ALSA definitions is not strictly 1:1, e.g. in some cases the HW_PARAM flag might be set during the .prepare callback, while the HW_FREE might be sent during the ALSA .trigger for stop/suspend. The semantics of the flags is to reserve and start/stop all needed resources, typically hardware related such as DMAs or clocks, when the HW_PARAMS is set, while the HW_FREE flag allows the firmware to release the resources allocated. The data transfers are still controlled within the firmware through the propagation of the trigger command. The driver can then pass information that the DAI_CONFIG was invoked in e.g. a pipeline/DAI setup, hw_params or hw_free stage without having to use a special DAI-specific encoding. Unfortunately we can't remove old encodings due to backwards-compatibility requirements but for new cases, such as the SSP in follow-up patches, we can make the IPC less cryptic. This change is tagged as ABI 3.19 and is completely backwards compatible. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Guennadi Liakhovetski Reviewed-by: Brent Lu Link: https://lore.kernel.org/r/20211004171430.103674-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: dai: mirror group_id definition added in firmware

2021-10-05T12:08:10Z

This was added in ABI 3.17 but never added to the kernel tree. The group_id is not currently used but this patch is required before additional changes. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Guennadi Liakhovetski Reviewed-by: Brent Lu Link: https://lore.kernel.org/r/20211004171430.103674-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ext_manifest: use explicit number for elem_type

2021-02-10T17:17:13Z

Use explicit number to define elem_type enum instead of using SOF_IPC_EXT_*. Reviewed-by: Guennadi Liakhovetski Reviewed-by: Karol Trzciński Reviewed-by: Kai Vehmanen Signed-off-by: Fred Oh Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210208232149.58899-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: trace: Add runtime trace filtering mechanism

2020-12-07T14:22:05Z

The "filter" debugfs file defines the log levels used by the firmware and reported by sof-logger. The file contains the formatted entry list, where each entry follows the following syntax in plain text: log_level uuid_id pipe_id comp_id; This file may be updated by userspace applications such sof-logger, or directly by the user during debugging process. An unused (wildcard) pipe_id or comp_id value should be set to -1, uuid_id is hexadecimal value, so when unused then should be set to 0. When the file is modified, an IPC command is sent to FW with new trace levels for selected components in filter elements list. Signed-off-by: Karol Trzcinski Reviewed-by: Guennadi Liakhovetski Signed-off-by: Kai Vehmanen Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown