linux/include/trace, branch v5.11

Merge tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

2021-01-24T17:35:28Z

Pull misc fixes from Christian Brauner: - Jann reported sparse complaints because of a missing __user annotation in a helper we added way back when we added pidfd_send_signal() to avoid compat syscall handling. Fix it. - Yanfei replaces a reference in a comment to the _do_fork() helper I removed a while ago with a reference to the new kernel_clone() replacement - Alexander Guril added a simple coding style fix * tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: kthread: remove comments about old _do_fork() helper Kernel: fork.c: Fix coding style: Do not use {} around single-line statements signal: Add missing __user annotation to copy_siginfo_from_user_any

SUNRPC: Move the svc_xdr_recvfrom tracepoint again

2021-01-13T14:13:20Z

Commit 156708adf2d9 ("SUNRPC: Move the svc_xdr_recvfrom() tracepoint") tried to capture the correct XID in the trace record, but this line in svc_recv: rqstp->rq_xid = svc_getu32(&rqstp->rq_arg.head[0]); alters the size of rq_arg.head[0].iov_len. The tracepoint records the correct XID but an incorrect value for the length of the xdr_buf's head. To keep the trace callsites simple, I've created two trace classes. One assumes the xdr_buf contains a full RPC message, and the XID can be extracted from it. The other assumes the contents of the xdr_buf are arbitrary, and the xid will be provided by the caller. Currently there is only one user of each class, but I expect we will need a few more tracepoints using each class as time goes on. Signed-off-by: Chuck Lever

kthread: remove comments about old _do_fork() helper

2021-01-11T14:11:56Z

The old _do_fork() helper has been removed in favor of kernel_clone(). Here correct some comments which still contain _do_fork() Link: https://lore.kernel.org/r/20210111104807.18022-1-yanfei.xu@windriver.com Cc: christian@brauner.io Cc: linux-kernel@vger.kernel.org Acked-by: Christian Brauner Signed-off-by: Yanfei Xu Signed-off-by: Christian Brauner

Merge tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

2021-01-05T19:55:46Z

Pull AFS fixes from David Howells: "Two fixes. The first is the fix for the strnlen() array limit check and the second fixes the calculation of the number of dirent records used to represent any particular filename length" * tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix directory entry size calculation afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y

afs: Fix directory entry size calculation

2021-01-04T12:25:19Z

The number of dirent records used by an AFS directory entry should be calculated using the assumption that there is a 16-byte name field in the first block, rather than a 20-byte name field (which is actually the case). This miscalculation is historic and effectively standard, so we have to use it. The calculation we need to use is: 1 + (((strlen(name) + 1) + 15) >> 5) where we are adding one to the strlen() result to account for the NUL termination. Fix this by the following means: (1) Create an inline function to do the calculation for a given name length. (2) Use the function to calculate the number of records used for a dirent in afs_dir_iterate_block(). Use this to move the over-end check out of the loop since it only needs to be done once. Further use this to only go through the loop for the 2nd+ records composing an entry. The only test there now is for if the record is allocated - and we already checked the first block at the top of the outer loop. (3) Add a max name length check in afs_dir_iterate_block(). (4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function from (1) to calculate the number of blocks rather than doing it incorrectly themselves. Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...") Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David Howells Tested-by: Marc Dionne

Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block

2020-12-24T20:28:35Z

Pull block fixes from Jens Axboe: "A few stragglers in here, but mostly just straight fixes. In particular: - Set of rnbd fixes for issues around changes for the merge window (Gioh, Jack, Md Haris Iqbal) - iocost tracepoint addition (Baolin) - Copyright/maintainers update (Christoph) - Remove old blk-mq fast path CPU warning (Daniel) - loop max_part fix (Josh) - Remote IPI threaded IRQ fix (Sebastian) - dasd stable fixes (Stefan) - bcache merge window fixup and style fixup (Yi, Zheng)" * tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block: md/bcache: convert comma to semicolon bcache:remove a superfluous check in register_bcache block: update some copyrights block: remove a pointless self-reference in block_dev.c MAINTAINERS: add fs/block_dev.c to the block section blk-mq: Don't complete on a remote CPU in force threaded mode s390/dasd: fix list corruption of lcu list s390/dasd: fix list corruption of pavgroup group list s390/dasd: prevent inconsistent LCU device data s390/dasd: fix hanging device offline processing blk-iocost: Add iocg idle state tracepoint nbd: Respect max_part for all partition scans block/rnbd-clt: Does not request pdu to rtrs-clt block/rnbd-clt: Dynamically allocate sglist for rnbd_iu block/rnbd: Set write-back cache and fua same to the target device block/rnbd: Fix typos block/rnbd-srv: Protect dev session sysfs removal block/rnbd-clt: Fix possible memleak block/rnbd-clt: Get rid of warning regarding size argument in strlcpy blk-mq: Remove 'running from the wrong CPU' warning

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-12-21T18:39:37Z

Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2020-12-20T18:44:05Z

Pull KVM updates from Paolo Bonzini: "Much x86 work was pushed out to 5.12, but ARM more than made up for it. ARM: - PSCI relay at EL2 when "protected KVM" is enabled - New exception injection code - Simplification of AArch32 system register handling - Fix PMU accesses when no PMU is enabled - Expose CSV3 on non-Meltdown hosts - Cache hierarchy discovery fixes - PV steal-time cleanups - Allow function pointers at EL2 - Various host EL2 entry cleanups - Simplification of the EL2 vector allocation s390: - memcg accouting for s390 specific parts of kvm and gmap - selftest for diag318 - new kvm_stat for when async_pf falls back to sync x86: - Tracepoints for the new pagetable code from 5.10 - Catch VFIO and KVM irqfd events before userspace - Reporting dirty pages to userspace with a ring buffer - SEV-ES host support - Nested VMX support for wait-for-SIPI activity state - New feature flag (AVX512 FP16) - New system ioctl to report Hyper-V-compatible paravirtualization features Generic: - Selftest improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: SVM: fix 32-bit compilation KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting KVM: SVM: Provide support to launch and run an SEV-ES guest KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests KVM: SVM: Provide support for SEV-ES vCPU loading KVM: SVM: Provide support for SEV-ES vCPU creation/loading KVM: SVM: Update ASID allocation to support SEV-ES guests KVM: SVM: Set the encryption mask for the SVM host save area KVM: SVM: Add NMI support for an SEV-ES guest KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest KVM: SVM: Do not report support for SMM for an SEV-ES guest KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES KVM: SVM: Add support for CR8 write traps for an SEV-ES guest KVM: SVM: Add support for CR4 write traps for an SEV-ES guest KVM: SVM: Add support for CR0 write traps for an SEV-ES guest KVM: SVM: Add support for EFER write traps for an SEV-ES guest KVM: SVM: Support string IO operations for an SEV-ES guest KVM: SVM: Support MMIO for an SEV-ES guest KVM: SVM: Create trace events for VMGEXIT MSR protocol processing KVM: SVM: Create trace events for VMGEXIT processing ...

Merge tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

2020-12-17T20:15:03Z

Pull NFS client updates from Trond Myklebust: "Highlights include: Features: - NFSv3: Add emulation of lookupp() to improve open_by_filehandle() support - A series of patches to improve readdir performance, particularly with large directories - Basic support for using NFS/RDMA with the pNFS files and flexfiles drivers - Micro-optimisations for RDMA - RDMA tracing improvements Bugfixes: - Fix a long standing bug with xs_read_xdr_buf() when receiving partial pages (Dan Aloni) - Various fixes for getxattr and listxattr, when used over non-TCP transports - Fixes for containerised NFS from Sargun Dhillon - switch nfsiod to be an UNBOUND workqueue (Neil Brown) - READDIR should not ask for security label information if there is no LSM policy (Olga Kornievskaia) - Avoid using interval-based rebinding with TCP in lockd (Calum Mackay) - A series of RPC and NFS layer fixes to support the NFSv4.2 READ_PLUS code - A couple of fixes for pnfs/flexfiles read failover Cleanups: - Various cleanups for the SUNRPC xdr code in conjunction with the READ_PLUS fixes" * tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits) NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read() pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read NFSv4/pnfs: Add tracing for the deviceid cache fs/lockd: convert comma to semicolon NFSv4.2: fix error return on memory allocation failure NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer NFSv4.2: decode_read_plus_hole() needs to check the extent offset NFSv4.2: decode_read_plus_data() must skip padding after data segment NFSv4.2: Ensure we always reset the result->count in decode_read_plus() SUNRPC: When expanding the buffer, we may need grow the sparse pages SUNRPC: Cleanup - constify a number of xdr_buf helpers SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field SUNRPC: _copy_to/from_pages() now check for zero length SUNRPC: Cleanup xdr_shrink_bufhead() SUNRPC: Fix xdr_expand_hole() SUNRPC: Fixes for xdr_align_data() SUNRPC: _shift_data_left/right_pages should check the shift length ...

Merge tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

2020-12-17T19:18:00Z

Pull f2fs updates from Jaegeuk Kim: "In this round, we've made more work into per-file compression support. For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to change the algorithm or cluster size per file. F2FS_IOC_COMPRESS | DECOMPRESS_FILE provides a way to compress and decompress the existing normal files manually. There is also a new mount option, compress_mode=fs|user, which can control who compresses the data. Chao also added a checksum feature with a mount option so that we are able to detect any corrupted cluster. In addition, Daniel contributed casefolding with encryption patch, which will be used for Android devices. Summary: Enhancements: - add ioctls and mount option to manage per-file compression feature - support casefolding with encryption - support checksum for compressed cluster - avoid IO starvation by replacing mutex with rwsem - add sysfs, max_io_bytes, to control max bio size Bug fixes: - fix use-after-free issue when compression and fsverity are enabled - fix consistency corruption during fault injection test - fix data offset for lseek - get rid of buffer_head which has 32bits limit in fiemap - fix some bugs in multi-partitions support - fix nat entry count calculation in shrinker - fix some stat information And, we've refactored some logics and fix minor bugs as well" * tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits) f2fs: compress: fix compression chksum f2fs: fix shift-out-of-bounds in sanity_check_raw_super() f2fs: fix race of pending_pages in decompression f2fs: fix to account inline xattr correctly during recovery f2fs: inline: fix wrong inline inode stat f2fs: inline: correct comment in f2fs_recover_inline_data f2fs: don't check PAGE_SIZE again in sanity_check_raw_super() f2fs: convert to F2FS_*_INO macro f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size f2fs: don't allow any writes on readonly mount f2fs: avoid race condition for shrinker count f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE f2fs: add compress_mode mount option f2fs: Remove unnecessary unlikely() f2fs: init dirty_secmap incorrectly f2fs: remove buffer_head which has 32bits limit f2fs: fix wrong block count instead of bytes f2fs: use new conversion functions between blks and bytes f2fs: rename logical_to_blk and blk_to_logical f2fs: fix kbytes written stat for multi-device case ...