linux/include/uapi/asm-generic, branch v6.13

Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-11-23T17:58:07Z

Pull MM updates from Andrew Morton: - The series "zram: optimal post-processing target selection" from Sergey Senozhatsky improves zram's post-processing selection algorithm. This leads to improved memory savings. - Wei Yang has gone to town on the mapletree code, contributing several series which clean up the implementation: - "refine mas_mab_cp()" - "Reduce the space to be cleared for maple_big_node" - "maple_tree: simplify mas_push_node()" - "Following cleanup after introduce mas_wr_store_type()" - "refine storing null" - The series "selftests/mm: hugetlb_fault_after_madv improvements" from David Hildenbrand fixes this selftest for s390. - The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng implements some rationaizations and cleanups in the page mapping code. - The series "mm: optimize shadow entries removal" from Shakeel Butt optimizes the file truncation code by speeding up the handling of shadow entries. - The series "Remove PageKsm()" from Matthew Wilcox completes the migration of this flag over to being a folio-based flag. - The series "Unify hugetlb into arch_get_unmapped_area functions" from Oscar Salvador implements a bunch of consolidations and cleanups in the hugetlb code. - The series "Do not shatter hugezeropage on wp-fault" from Dev Jain takes away the wp-fault time practice of turning a huge zero page into small pages. Instead we replace the whole thing with a THP. More consistent cleaner and potentiall saves a large number of pagefaults. - The series "percpu: Add a test case and fix for clang" from Andy Shevchenko enhances and fixes the kernel's built in percpu test code. - The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett optimizes mremap() by avoiding doing things which we didn't need to do. - The series "Improve the tmpfs large folio read performance" from Baolin Wang teaches tmpfs to copy data into userspace at the folio size rather than as individual pages. A 20% speedup was observed. - The series "mm/damon/vaddr: Fix issue in damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting. - The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt removes the long-deprecated memcgv2 charge moving feature. - The series "fix error handling in mmap_region() and refactor" from Lorenzo Stoakes cleanup up some of the mmap() error handling and addresses some potential performance issues. - The series "x86/module: use large ROX pages for text allocations" from Mike Rapoport teaches x86 to use large pages for read-only-execute module text. - The series "page allocation tag compression" from Suren Baghdasaryan is followon maintenance work for the new page allocation profiling feature. - The series "page->index removals in mm" from Matthew Wilcox remove most references to page->index in mm/. A slow march towards shrinking struct page. - The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs interface tests" from Andrew Paniakin performs maintenance work for DAMON's self testing code. - The series "mm: zswap swap-out of large folios" from Kanchana Sridhar improves zswap's batching of compression and decompression. It is a step along the way towards using Intel IAA hardware acceleration for this zswap operation. - The series "kasan: migrate the last module test to kunit" from Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests over to the KUnit framework. - The series "implement lightweight guard pages" from Lorenzo Stoakes permits userapace to place fault-generating guard pages within a single VMA, rather than requiring that multiple VMAs be created for this. Improved efficiencies for userspace memory allocators are expected. - The series "memcg: tracepoint for flushing stats" from JP Kobryn uses tracepoints to provide increased visibility into memcg stats flushing activity. - The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky fixes a zram buglet which potentially affected performance. - The series "mm: add more kernel parameters to control mTHP" from Maíra Canal enhances our ability to control/configuremultisize THP from the kernel boot command line. - The series "kasan: few improvements on kunit tests" from Sabyrzhan Tasbolatov has a couple of fixups for the KASAN KUnit tests. - The series "mm/list_lru: Split list_lru lock into per-cgroup scope" from Kairui Song optimizes list_lru memory utilization when lockdep is enabled. * tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits) cma: enforce non-zero pageblock_order during cma_init_reserved_mem() mm/kfence: add a new kunit test test_use_after_free_read_nofault() zram: fix NULL pointer in comp_algorithm_show() memcg/hugetlb: add hugeTLB counters to memcg vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount zram: ZRAM_DEF_COMP should depend on ZRAM MAINTAINERS/MEMORY MANAGEMENT: add document files for mm Docs/mm/damon: recommend academic papers to read and/or cite mm: define general function pXd_init() kmemleak: iommu/iova: fix transient kmemleak false positive mm/list_lru: simplify the list_lru walk callback function mm/list_lru: split the lock to per-cgroup scope mm/list_lru: simplify reparenting and initial allocation mm/list_lru: code clean up for reparenting mm/list_lru: don't export list_lru_add mm/list_lru: don't pass unnecessary key parameters kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols ...

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-11-21T16:28:08Z

Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...

Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2024-11-20T23:13:02Z

Pull asm-generic updates from Arnd Bergmann: "These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions" * tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits) empty include/asm-generic/vga.h sparc: get rid of asm/vga.h asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to vt_buffer.h: get rid of dead code in default scr_...() instances tty: serial: export serial_8250_warn_need_ioport lib/iomem_copy: fix kerneldoc format style hexagon: simplify asm/io.h for !HAS_IOPORT loongarch: Use new fallback IO memcpy/memset csky: Use new fallback IO memcpy/memset arm64: Use new fallback IO memcpy/memset New implementation for IO memcpy and IO memset watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 __arch_xprod64(): make __always_inline when optimizing for performance ARM: div64: improve __arch_xprod_64() asm-generic/div64: optimize/simplify __div64_const32() lib/math/test_div64: add some edge cases relevant to __div64_const32() asm-generic: add an optional pfn_valid check to page_to_phys asm-generic: provide generic page_to_phys and phys_to_page implementations asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n tty: serial: handle HAS_IOPORT dependencies ...

Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-11-20T00:35:06Z

Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ...

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2024-11-19T02:10:37Z

Pull arm64 updates from Catalin Marinas: - Support for running Linux in a protected VM under the Arm Confidential Compute Architecture (CCA) - Guarded Control Stack user-space support. Current patches follow the x86 ABI of implicitly creating a shadow stack on clone(). Subsequent patches (already on the list) will add support for clone3() allowing finer-grained control of the shadow stack size and placement from libc - AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are getting close with the upcoming dpISA support) - Other arch features: - In-kernel use of the memcpy instructions, FEAT_MOPS (previously only exposed to user; uaccess support not merged yet) - MTE: hugetlbfs support and the corresponding kselftests - Optimise CRC32 using the PMULL instructions - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG - Optimise the kernel TLB flushing to use the range operations - POE/pkey (permission overlays): further cleanups after bringing the signal handler in line with the x86 behaviour for 6.12 - arm64 perf updates: - Support for the NXP i.MX91 PMU in the existing IMX driver - Support for Ampere SoCs in the Designware PCIe PMU driver - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC - Support for Samsung's 'Mongoose' CPU PMU - Support for PMUv3.9 finer-grained userspace counter access control - Switch back to platform_driver::remove() now that it returns 'void' - Add some missing events for the CXL PMU driver - Miscellaneous arm64 fixes/cleanups: - Page table accessors cleanup: type updates, drop unused macros, reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity check addresses before runtime P4D/PUD folding - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the FEAT_ECV for the generic timers) allowing Linux to boot with firmware deployments that don't set SCTLR_EL3.ECVEn - ACPI/arm64: tighten the check for the array of platform timer structures and adjust the error handling procedure in gtdt_parse_timer_block() - Optimise the cache flush for the uprobes xol slot (skip if no change) and other uprobes/kprobes cleanups - Fix the context switching of tpidrro_el0 when kpti is enabled - Dynamic shadow call stack fixes - Sysreg updates - Various arm64 kselftest improvements * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits) arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled kselftest/arm64: Try harder to generate different keys during PAC tests kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all() arm64/ptrace: Clarify documentation of VL configuration via ptrace kselftest/arm64: Corrupt P0 in the irritator when testing SSVE acpi/arm64: remove unnecessary cast arm64/mm: Change protval as 'pteval_t' in map_range() kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c kselftest/arm64: Add FPMR coverage to fp-ptrace kselftest/arm64: Expand the set of ZA writes fp-ptrace does kselftets/arm64: Use flag bits for features in fp-ptrace assembler code kselftest/arm64: Enable build of PAC tests with LLVM=1 kselftest/arm64: Check that SVCR is 0 in signal handlers selftests/mm: Fix unused function warning for aarch64_write_signal_pkey() kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests kselftest/arm64: Fix build with stricter assemblers arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux() arm64/scs: Deal with 64-bit relative offsets in FDE frames ...

mm: madvise: implement lightweight guard page mechanism

2024-11-11T08:26:45Z

Implement a new lightweight guard page feature, that is regions of userland virtual memory that, when accessed, cause a fatal signal to arise. Currently users must establish PROT_NONE ranges to achieve this. However this is very costly memory-wise - we need a VMA for each and every one of these regions AND they become unmergeable with surrounding VMAs. In addition repeated mmap() calls require repeated kernel context switches and contention of the mmap lock to install these ranges, potentially also having to unmap memory if installed over existing ranges. The lightweight guard approach eliminates the VMA cost altogether - rather than establishing a PROT_NONE VMA, it operates at the level of page table entries - establishing PTE markers such that accesses to them cause a fault followed by a SIGSGEV signal being raised. This is achieved through the PTE marker mechanism, which we have already extended to provide PTE_MARKER_GUARD, which we installed via the generic page walking logic which we have extended for this purpose. These guard ranges are established with MADV_GUARD_INSTALL. If the range in which they are installed contain any existing mappings, they will be zapped, i.e. free the range and unmap memory (thus mimicking the behaviour of MADV_DONTNEED in this respect). Any existing guard entries will be left untouched. There is therefore no nesting of guarded pages. Guarded ranges are NOT cleared by MADV_DONTNEED nor MADV_FREE (in both instances the memory range may be reused at which point a user would expect guards to still be in place), but they are cleared via MADV_GUARD_REMOVE, process teardown or unmapping of memory ranges. The guard property can be removed from ranges via MADV_GUARD_REMOVE. The ranges over which this is applied, should they contain non-guard entries, will be untouched, with only guard entries being cleared. We permit this operation on anonymous memory only, and only VMAs which are non-special, non-huge and not mlock()'d (if we permitted this we'd have to drop locked pages which would be rather counterintuitive). Racing page faults can cause repeated attempts to install guard pages that are interrupted, result in a zap, and this process can end up being repeated. If this happens more than would be expected in normal operation, we rescind locks and retry the whole thing, which avoids lock contention in this scenario. Link: https://lkml.kernel.org/r/6aafb5821bf209f277dfae0787abb2ef87a37542.1730123433.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes Suggested-by: Vlastimil Babka Suggested-by: Jann Horn Suggested-by: David Hildenbrand Suggested-by: Vlastimil Babka Suggested-by: Jann Horn Suggested-by: David Hildenbrand Acked-by: Vlastimil Babka Cc: Arnd Bergmann Cc: Christian Brauner Cc: Christoph Hellwig Cc: Chris Zankel Cc: Helge Deller Cc: James E.J. Bottomley Cc: Jeff Xu Cc: John Hubbard Cc: Liam R. Howlett Cc: Matthew Wilcox (Oracle) Cc: Matt Turner Cc: Max Filippov Cc: Muchun Song Cc: Paul E. McKenney Cc: Richard Henderson Cc: Shuah Khan Cc: Shuah Khan Cc: Sidhartha Kumar Cc: Suren Baghdasaryan Cc: Thomas Bogendoerfer Signed-off-by: Andrew Morton

posix-timers: Move sequence logic into struct k_itimer

2024-11-07T01:14:45Z

The posix timer signal handling uses siginfo::si_sys_private for handling the sequence counter check. That indirection is not longer required and the sequence count value at signal queueing time can be stored in struct k_itimer itself. This removes the requirement of treating siginfo::si_sys_private special as it's now always zero as the kernel does not touch it anymore. Suggested-by: Eric W. Biederman Signed-off-by: Thomas Gleixner Reviewed-by: Frederic Weisbecker Acked-by: "Eric W. Biederman" Link: https://lore.kernel.org/all/20241105064213.852619866@linutronix.de

fs/xattr: add *at family syscalls

2024-11-06T17:59:44Z

Add the four syscalls setxattrat(), getxattrat(), listxattrat() and removexattrat(). Those can be used to operate on extended attributes, especially security related ones, either relative to a pinned directory or on a file descriptor without read access, avoiding a /proc//fd/ detour, requiring a mounted procfs. One use case will be setfiles(8) setting SELinux file contexts ("security.selinux") without race conditions and without a file descriptor opened with read access requiring SELinux read permission. Use the do_{name}at() pattern from fs/open.c. Pass the value of the extended attribute, its length, and for setxattrat(2) the command (XATTR_CREATE or XATTR_REPLACE) via an added struct xattr_args to not exceed six syscall arguments and not merging the AT_* and XATTR_* flags. [AV: fixes by Christian Brauner folded in, the entire thing rebased on top of {filename,file}_...xattr() primitives, treatment of empty pathnames regularized. As the result, AT_EMPTY_PATH+NULL handling is cheap, so f...(2) can use it] Signed-off-by: Christian Göttsche Link: https://lore.kernel.org/r/20240426162042.191916-1-cgoettsche@seltendoof.de Reviewed-by: Arnd Bergmann Reviewed-by: Christian Brauner CC: x86@kernel.org CC: linux-alpha@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-ia64@vger.kernel.org CC: linux-m68k@lists.linux-m68k.org CC: linux-mips@vger.kernel.org CC: linux-parisc@vger.kernel.org CC: linuxppc-dev@lists.ozlabs.org CC: linux-s390@vger.kernel.org CC: linux-sh@vger.kernel.org CC: sparclinux@vger.kernel.org CC: linux-fsdevel@vger.kernel.org CC: audit@vger.kernel.org CC: linux-arch@vger.kernel.org CC: linux-api@vger.kernel.org CC: linux-security-module@vger.kernel.org CC: selinux@vger.kernel.org [brauner: slight tweaks] Signed-off-by: Christian Brauner Signed-off-by: Al Viro

UAPI/ioctl: Improve parameter name of ioctl request definition helpers

2024-10-28T21:44:22Z

The third parameter to _IOR et al is a type name, not a size. So the parameter being named "size" is irritating. Rename it to "argtype" instead to reduce confusion. There is a very minor chance that this breaks stuff. It only hurts however if there is a variable (or macro) in userspace that is called "argtype" *and* it's used in the parameters of _IOR and friends. IMHO this is negligible because usually definitions making use of these macros are provided by kernel headers (i.e. us) or if they are replicated in userspace code, they are replicated and so supposed to match the kernel definitions (e.g. to make them usable by programs without the need to update the kernel headers used to compile the program). Signed-off-by: Uwe Kleine-König Signed-off-by: Arnd Bergmann

net_tstamp: add SCM_TS_OPT_ID to provide OPT_ID in control message

2024-10-04T18:52:19Z

SOF_TIMESTAMPING_OPT_ID socket option flag gives a way to correlate TX timestamps and packets sent via socket. Unfortunately, there is no way to reliably predict socket timestamp ID value in case of error returned by sendmsg. For UDP sockets it's impossible because of lockless nature of UDP transmit, several threads may send packets in parallel. In case of RAW sockets MSG_MORE option makes things complicated. More details are in the conversation [1]. This patch adds new control message type to give user-space software an opportunity to control the mapping between packets and values by providing ID with each sendmsg for UDP sockets. The documentation is also added in this patch. [1] https://lore.kernel.org/netdev/CALCETrU0jB+kg0mhV6A8mrHfTE1D1pr1SD_B9Eaa9aDPfgHdtA@mail.gmail.com/ Reviewed-by: Willem de Bruijn Reviewed-by: Jason Xing Signed-off-by: Vadim Fedorenko Link: https://patch.msgid.link/20241001125716.2832769-2-vadfed@meta.com Signed-off-by: Jakub Kicinski