linux/include/uapi/rdma, branch v6.7

RDMA/core: Add support to set privileged QKEY parameter

2023-10-19T06:31:00Z

Add netlink command that enables/disables privileged QKEY by default. It is disabled by default, since according to IB spec only privileged users are allowed to use privileged QKEY. According to the IB specification rel-1.6, section 3.5.3: "QKEYs with the most significant bit set are considered controlled QKEYs, and a HCA does not allow a consumer to arbitrarily specify a controlled QKEY." Using rdma tool, $rdma system set privileged-qkey on When enabled non-privileged users would be able to use controlled QKEYs which are considered privileged. Using rdma tool, $rdma system set privileged-qkey off When disabled only privileged users would be able to use controlled QKEYs. You can also use the command below to check the parameter state: $rdma system show netns shared privileged-qkey off copy-on-fork on Signed-off-by: Patrisious Haddad Link: https://lore.kernel.org/r/90398be70a9d23d2aa9d0f9fd11d2c264c1be534.1696848201.git.leon@kernel.org Signed-off-by: Leon Romanovsky

RDMA/hns: Support SRQ record doorbell

2023-10-02T08:47:08Z

Compared with normal doorbell, using record doorbell can shorten the process of ringing the doorbell and reduce the latency. Add a flag HNS_ROCE_CAP_FLAG_SRQ_RECORD_DB to allow FW to enable/disable SRQ record doorbell. If the flag above is set, allocate the dma buffer for SRQ record doorbell and write the buffer address into SRQC during SRQ creation. For userspace SRQ, add a flag HNS_ROCE_RSP_SRQ_CAP_RECORD_DB to notify userspace whether the SRQ record doorbell is enabled. Signed-off-by: Yangyang Li Signed-off-by: Junxian Huang Link: https://lore.kernel.org/r/20230926130026.583088-1-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky

IB/core: Add support for XDR link speed

2023-09-26T09:38:39Z

Add new IBTA speed XDR, the new rate that was added to Infiniband spec as part of XDR and supporting signaling rate of 200Gb. In order to report that value to rdma-core, add new u32 field to query_port response. Signed-off-by: Or Har-Toov Reviewed-by: Mark Zhang Link: https://lore.kernel.org/r/9d235fc600a999e8274010f0e18b40fa60540e6c.1695204156.git.leon@kernel.org Reviewed-by: Jacob Keller Signed-off-by: Leon Romanovsky

RDMA/core: Add support to dump SRQ resource in RAW format

2023-09-20T07:50:54Z

Add support to dump SRQ resource in raw format. It enable drivers to return the entire device specific SRQ context without setting each field separately. Example: $ rdma res show srq -r dev hns3 149000... $ rdma res show srq -j -r [{"ifindex":0,"ifname":"hns3","data":[149,0,0,...]}] Signed-off-by: wenglianfa Link: https://lore.kernel.org/r/20230918131110.3987498-3-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky

IB: Use capital "OR" for multiple licenses in SPDX

2023-09-11T11:14:00Z

Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230823092912.122674-1-krzysztof.kozlowski@linaro.org Signed-off-by: Leon Romanovsky

RDMA/irdma: Use HW specific minimum WQ size

2023-07-30T12:43:00Z

HW GEN1 and GEN2 have different min WQ sizes but they are currently set to the same value. Use a gen specific attribute min_hw_wq_size and extend ABI to pass it to user-space. Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20230725155525.1081-3-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky

RDMA/irdma: Allow accurate reporting on QP max send/recv WR

2023-07-30T12:43:00Z

Currently the attribute cap.max_send_wr and cap.max_recv_wr sent from user-space during create QP are the provider computed SQ/RQ depth as opposed to raw values passed from application. This inhibits computation of an accurate value for max_send_wr and max_recv_wr for this QP in the kernel which matches the value returned in user create QP. Also these capabilities needs to be reported from the driver in query QP. Add support by extending the ABI to allow the raw cap.max_send_wr and cap.max_recv_wr to be passed from user-space, while keeping compatibility for the older scheme. The internal HW depth and shift needed for the WQs needs to be computed now for both kernel and user-mode QPs. Add new helpers to assist with this: irdma_uk_calc_depth_shift_sq, irdma_uk_calc_depth_shift_rq and irdma_uk_calc_depth_shift_wq. Consolidate all the user mode QP setup into a new function irdma_setup_umode_qp which keeps it with its counterpart irdma_setup_kmode_qp. Signed-off-by: Youvaraj Sagar Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20230725155525.1081-2-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky

RDMA/bnxt_re: Add a new uapi for driver notification

2023-07-21T19:15:33Z

Add driver notify uapi for application notifying the driver about the doorbell FIFO congestion. Link: https://lore.kernel.org/r/1689742977-9128-8-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Chandramohan Akula Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe

RDMA/bnxt_re: Update alloc_page uapi for pacing

2023-07-21T19:15:32Z

Update the alloc_page uapi functionality for handling the mapping of doorbell pacing shared page and bar address. Link: https://lore.kernel.org/r/1689742977-9128-6-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Chandramohan Akula Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe

RDMA/bnxt_re: Enable pacing support for the user apps

2023-07-21T19:15:32Z

Report the pacing capability to the user applications. Link: https://lore.kernel.org/r/1689742977-9128-5-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Chandramohan Akula Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe