linux/include/uapi, branch v4.19

sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead

2018-10-16T16:58:49Z

According to rfc7496 section 4.3 or 4.4: sprstat_policy: This parameter indicates for which PR-SCTP policy the user wants the information. It is an error to use SCTP_PR_SCTP_NONE in sprstat_policy. If SCTP_PR_SCTP_ALL is used, the counters provided are aggregated over all supported policies. We change to dump pr_assoc and pr_stream all status by SCTP_PR_SCTP_ALL instead, and return error for SCTP_PR_SCTP_NONE, as it also said "It is an error to use SCTP_PR_SCTP_NONE in sprstat_policy. " Fixes: 826d253d57b1 ("sctp: add SCTP_PR_ASSOC_STATUS on sctp sockopt") Fixes: d229d48d183f ("sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctp") Reported-by: Ying Xu Signed-off-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller

Merge tag 'rxrpc-fixes-20181008' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

2018-10-11T05:27:38Z

David Howells says: ==================== rxrpc: Fix packet reception code Here are a set of patches that prepares for and fix problems in rxrpc's package reception code. There serious problems are: (A) There's a window between binding the socket and setting the data_ready hook in which packets can find their way into the UDP socket's receive queues. (B) The skb_recv_udp() will return an error (and clear the error state) if there was an error on the Tx side. rxrpc doesn't handle this. (C) The rxrpc data_ready handler doesn't fully drain the UDP receive queue. (D) The rxrpc data_ready handler assumes it is called in a non-reentrant state. The second patch fixes (A) - (C); the third patch renders (B) and (C) non-issues by using the recap_rcv hook instead of data_ready - and the final patch fixes (D). That last is the most complex. The preparatory patches are: (1) Fix some places that are doing things in the wrong net namespace. (2) Stop taking the rcu read lock as it's held by the IP input routine in the call chain. (3) Only end the Tx phase if *we* rotated the final packet out of the Tx buffer. (4) Don't assume that the call state won't change after dropping the call_state lock. (5) Only take receive window and MTU suze parameters from an ACK packet if it's the latest ACK packet. (6) Record connection-level abort information correctly. (7) Fix a trace line. And then there are three main patches - note that these are mixed in with the preparatory patches somewhat: (1) Fix the setup window (A), skb_recv_udp() error check (B) and packet drainage (C). (2) Switch to using the encap_rcv instead of data_ready to cut out the effects of the UDP read queues and get the packets delivered directly. (3) Add more locking into the various packet input paths to defend against re-entrance (D). ==================== Signed-off-by: David S. Miller

rxrpc: Use the UDP encap_rcv hook

2018-10-08T14:45:18Z

Use the UDP encap_rcv hook to cut the bit out of the rxrpc packet reception in which a packet is placed onto the UDP receive queue and then immediately removed again by rxrpc. Going via the queue in this manner seems like it should be unnecessary. This does, however, require the invention of a value to place in encap_type as that's one of the conditions to switch packets out to the encap_rcv hook. Possibly the value doesn't actually matter for anything other than sockopts on the UDP socket, which aren't accessible outside of rxrpc anyway. This seems to cut a bit of time out of the time elapsed between each sk_buff being timestamped and turning up in rxrpc (the final number in the following trace excerpts). I measured this by making the rxrpc_rx_packet trace point print the time elapsed between the skb being timestamped and the current time (in ns), e.g.: ... 424.278721: rxrpc_rx_packet: ... ACK 25026 So doing a 512MiB DIO read from my test server, with an unmodified kernel: N min max sum mean stddev 27605 2626 7581 7.83992e+07 2840.04 181.029 and with the patch applied: N min max sum mean stddev 27547 1895 12165 6.77461e+07 2459.29 255.02 Signed-off-by: David Howells

net/smc: retain old name for diag_mode field

2018-10-08T04:06:28Z

Commit c601171d7a60 ("net/smc: provide smc mode in smc_diag.c") changed the name of diag_fallback field of struct smc_diag_msg structure to diag_mode. However, this structure is a part of UAPI, and this change breaks user space applications that use it ([1], for example). Since the new name is more suitable, convert the field to a union that provides access to the data via both the new and the old name. [1] https://gitlab.com/strace/strace/blob/v4.24/netlink_smc_diag.c#L165 Fixes: c601171d7a60 ("net/smc: provide smc mode in smc_diag.c") Signed-off-by: Eugene Syromiatnikov Signed-off-by: David S. Miller

net/smc: use __aligned_u64 for 64-bit smc_diag fields

2018-10-08T04:06:28Z

Commit 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") introduced new UAPI-exposed structure, struct smcd_diag_dmbinfo. However, it's not usable by compat binaries, as it has different layout there. Probably, the most straightforward fix that will avoid similar issues in the future is to use __aligned_u64 for 64-bit fields. Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") Signed-off-by: Eugene Syromiatnikov Signed-off-by: David S. Miller

mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes

2018-10-05T23:32:04Z

ARM64 architecture also supports 32MB and 512MB HugeTLB page sizes. This just adds mmap() system call argument encoding for them. Link: http://lkml.kernel.org/r/1537841300-6979-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual Acked-by: Punit Agrawal Acked-by: Mike Kravetz Cc: Michal Hocko Cc: Will Deacon Cc: Catalin Marinas Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

Revert "uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name"

2018-09-25T11:28:58Z

This changes UAPI, breaking iwd and libell: ell/key.c: In function 'kernel_dh_compute': ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'? struct keyctl_dh_params params = { .private = private, ^~~~~~~ dh_private This reverts commit 8a2336e549d385bb0b46880435b411df8d8200e8. Fixes: 8a2336e549d3 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name") Signed-off-by: Lubomir Rintel Signed-off-by: David Howells cc: Randy Dunlap cc: Mat Martineau cc: Stephan Mueller cc: James Morris cc: "Serge E. Hallyn" cc: Mat Martineau cc: Andrew Morton cc: Linus Torvalds cc: Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-09-21T14:21:42Z

Paolo writes: "It's mostly small bugfixes and cleanups, mostly around x86 nested virtualization. One important change, not related to nested virtualization, is that the ability for the guest kernel to trap CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is now masked by default. This is because the feature is detected through an MSR; a very bad idea that Intel seems to like more and more. Some applications choke if the other fields of that MSR are not initialized as on real hardware, hence we have to disable the whole MSR by default, as was the case before Linux 4.12." * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits) KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs kvm: selftests: Add platform_info_test KVM: x86: Control guest reads of MSR_PLATFORM_INFO KVM: x86: Turbo bits in MSR_PLATFORM_INFO nVMX x86: Check VPID value on vmentry of L2 guests nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2 KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv KVM: VMX: check nested state and CR4.VMXE against SMM kvm: x86: make kvm_{load|put}_guest_fpu() static x86/hyper-v: rename ipi_arg_{ex,non_ex} structures KVM: VMX: use preemption timer to force immediate VMExit KVM: VMX: modify preemption timer bit only when arming timer KVM: VMX: immediately mark preemption timer expired only for zero value KVM: SVM: Switch to bitmap_zalloc() KVM/MMU: Fix comment in walk_shadow_page_lockless_end() kvm: selftests: use -pthread instead of -lpthread KVM: x86: don't reset root in kvm_mmu_setup() kvm: mmu: Don't read PDPTEs when paging is not enabled x86/kvm/lapic: always disable MMIO interface in x2APIC mode KVM: s390: Make huge pages unavailable in ucontrol VMs ...

Merge tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2018-09-20T07:50:49Z

Takashi writes: "sound fixes for 4.19-rc5 here comes a collection of various fixes, mostly for stable-tree or regression fixes. Two relatively high LOCs are about the (rather simple) conversion of uapi integer types in topology API, and a regression fix about HDMI hotplug notification on AMD HD-audio. The rest are all small individual fixes like ASoC Intel Skylake race condition, minor uninitialized page leak in emu10k1 ioctl, Firewire audio error paths, and so on." * tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits) ALSA: fireworks: fix memory leak of response buffer at error path ALSA: oxfw: fix memory leak of discovered stream formats at error path ALSA: oxfw: fix memory leak for model-dependent data at error path ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path ALSA: hda - Enable runtime PM only for discrete GPU ALSA: oxfw: fix memory leak of private data ALSA: firewire-tascam: fix memory leak of private data ALSA: firewire-digi00x: fix memory leak of private data sound: don't call skl_init_chip() to reset intel skl soc sound: enable interrupt after dma buffer initialization Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation" ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO ASoC: cs4265: fix MMTLR Data switch control ASoC: AMD: Ensure reset bit is cleared before configuring ALSA: fireface: fix memory leak in ff400_switch_fetching_mode() ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER ASoC: rsnd: adg: care clock-frequency size ASoC: uniphier: change status to orphan ASoC: rsnd: fixup not to call clk_get/set under non-atomic ...

KVM: x86: Control guest reads of MSR_PLATFORM_INFO

2018-09-19T22:51:46Z

Add KVM_CAP_MSR_PLATFORM_INFO so that userspace can disable guest access to reads of MSR_PLATFORM_INFO. Disabling access to reads of this MSR gives userspace the control to "expose" this platform-dependent information to guests in a clear way. As it exists today, guests that read this MSR would get unpopulated information if userspace hadn't already set it (and prior to this patch series, only the CPUID faulting information could have been populated). This existing interface could be confusing if guests don't handle the potential for incorrect/incomplete information gracefully (e.g. zero reported for base frequency). Signed-off-by: Drew Schmitt Signed-off-by: Paolo Bonzini