linux/include/ufs, branch v6.13

scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()

2025-01-02T18:00:16Z

PHY might already be powered on during ufs_qcom_power_up_sequence() in a couple of cases: 1. During UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH quirk 2. Resuming from spm_lvl = 5 suspend In those cases, it is necessary to call phy_power_off() and phy_exit() in ufs_qcom_power_up_sequence() function to power off the PHY before calling phy_init() and phy_power_on(). Case (1) is doing it via ufs_qcom_reinit_notify() callback, but case (2) is not handled. So to satisfy both cases, call phy_power_off() and phy_exit() if the phy_count is non-zero. And with this change, the reinit_notify() callback is no longer needed. This fixes the below UFS resume failure with spm_lvl = 5: ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5 ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume returns -5 ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error -5 Cc: stable@vger.kernel.org # 6.3 Fixes: baf5ddac90dc ("scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device") Reported-by: Ram Kumar Dwivedi Tested-by: Amit Pundir # on SM8550-HDK Reviewed-by: Bart Van Assche Tested-by: Neil Armstrong # on SM8550-QRD Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-1-63c4b95a70b9@linaro.org Signed-off-by: Martin K. Petersen

scsi: ufs: core: Add missing post notify for power mode change

2024-12-04T18:22:59Z

When the power mode change is successful but the power mode hasn't actually changed, the post notification was missed. Similar to the approach with hibernate/clock scale/hce enable, having pre/post notifications in the same function will make it easier to maintain. Additionally, supplement the description of power parameters for the pwr_change_notify callback. Fixes: 7eb584db73be ("ufs: refactor configuring power mode") Cc: stable@vger.kernel.org #6.11.x Signed-off-by: Peter Wang Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: ufs: ufs-mediatek: Configure individual LU queue flags

2024-11-07T01:42:17Z

Previously, ufs vops config_scsi_dev was removed because there were no users. ufs-mediatek needs it to configure the queue flags for each LU individually. Therefore, bring it back and customize the queue flag as required. [mkp: fixed typo] Signed-off-by: Ed Tsai Link: https://lore.kernel.org/r/20241008065950.23431-1-ed.tsai@mediatek.com Signed-off-by: Martin K. Petersen

scsi: ufs: core: Simplify ufshcd_err_handling_prepare()

2024-10-25T19:01:11Z

Use blk_mq_quiesce_tagset() instead of ufshcd_scsi_block_requests() and blk_mq_wait_quiesce_done(). Since this patch removes the last callers of ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests(), remove these functions. Reviewed-by: Avri Altman Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241022193130.2733293-6-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: ufs: core: Move the ufshcd_mcq_enable_esi() definition

2024-10-25T19:01:10Z

Move the ufshcd_mcq_enable_esi() definition such that it occurs immediately before the ufshcd_mcq_config_esi() definition. Reviewed-by: Peter Wang Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241022193130.2733293-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: ufs: core: Make DMA mask configuration more flexible

2024-10-25T18:57:51Z

Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with ufs_hba_variant_ops::set_dma_mask. Update the Renesas driver accordingly. This patch enables supporting other configurations than 32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses. Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org Reviewed-by: Avri Altman Reviewed-by: Peter Wang Signed-off-by: Martin K. Petersen

scsi: ufs: core: Improve the struct ufs_hba documentation

2024-10-04T01:34:43Z

Make the role of the structure members related to UIC command processing more clear. Reviewed-by: Peter Wang Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240912223019.3510966-2-bvanassche@acm.org Reviewed-by: Bao D. Nguyen Signed-off-by: Martin K. Petersen

Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-09-21T15:20:50Z

Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-09-19T09:28:51Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc, mpi3mr). There are no user visible core changes and a whole series of minor updates and fixes. The largest core change is probably the simplification of the workqueue allocation path" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits) scsi: smartpqi: update driver version to 2.1.30-031 scsi: smartpqi: fix volume size updates scsi: smartpqi: fix rare system hang during LUN reset scsi: smartpqi: add new controller PCI IDs scsi: smartpqi: add counter for parity write stream requests scsi: smartpqi: correct stream detection scsi: smartpqi: Add fw log to kdump scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port scsi: ufs: core: Remove ufshcd_urgent_bkops() scsi: core: Remove obsoleted declaration for scsi_driverbyte_string() scsi: bnx2i: Remove unused declarations scsi: core: Simplify an alloc_workqueue() invocation scsi: ufs: Simplify alloc*_workqueue() invocation scsi: stex: Simplify an alloc_ordered_workqueue() invocation scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations scsi: snic: Simplify alloc_workqueue() invocations scsi: qedi: Simplify an alloc_workqueue() invocation scsi: qedf: Simplify alloc_workqueue() invocations scsi: myrs: Simplify an alloc_ordered_workqueue() invocation ...

fault-inject: improve build for CONFIG_FAULT_INJECTION=n

2024-09-02T03:43:33Z

The fault-inject.h users across the kernel need to add a lot of #ifdef CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and should_fail() to allow removal of conditional compilation. [akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h] [akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c] [akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen] Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com Fixes: 6ff1cb355e62 ("[PATCH] fault-injection capabilities infrastructure") Signed-off-by: Jani Nikula Cc: Akinobu Mita Cc: Abhinav Kumar Cc: Dmitry Baryshkov Cc: Himal Prasad Ghimiray Cc: Lucas De Marchi Cc: Rob Clark Cc: Rodrigo Vivi Cc: Thomas Hellström Cc: Stephen Rothwell Signed-off-by: Andrew Morton