linux/include/video, branch v3.16

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2014-06-12T18:32:30Z

Pull drm updates from Dave Airlie: "This is the main drm merge window pull request, changes all over the place, mostly normal levels of churn. Highlights: Core drm: More cleanups, fix race on connector/encoder naming, docs updates, object locking rework in prep for atomic modeset i915: mipi DSI support, valleyview power fixes, cursor size fixes, execlist refactoring, vblank improvements, userptr support, OOM handling improvements radeon: GPUVM tuning and large page size support, gart fixes, deep color HDMI support, HDMI audio cleanups nouveau: - displayport rework should fix lots of issues - initial gk20a support - gk110b support - gk208 fixes exynos: probe order fixes, HDMI changes, IPP consolidation msm: debugfs updates, misc fixes ast: ast2400 support, sync with UMS driver tegra: cleanups, hdmi + hw cursor for Tegra 124. panel: fixes existing panels add some new ones. ipuv3: moved from staging to drivers/gpu" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits) drm/nouveau/disp/dp: fix tmds passthrough on dp connector drm/nouveau/dp: probe dpcd to determine connectedness drm/nv50-: trigger update after all connectors disabled drm/nv50-: prepare for attaching a SOR to multiple heads drm/gf119-/disp: fix debug output on update failure drm/nouveau/disp/dp: make use of postcursor when its available drm/g94-/disp/dp: take max pullup value across all lanes drm/nouveau/bios/dp: parse lane postcursor data drm/nouveau/dp: fix support for dpms drm/nouveau: register a drm_dp_aux channel for each dp connector drm/g94-/disp: add method to power-off dp lanes drm/nouveau/disp/dp: maintain link in response to hpd signal drm/g94-/disp: bash and wait for something after changing lane power regs drm/nouveau/disp/dp: split link config/power into two steps drm/nv50/disp: train PIOR-attached DP from second supervisor drm/nouveau/disp/dp: make use of existing output data for link training drm/gf119/disp: start removing direct vbios parsing from supervisor drm/nv50/disp: start removing direct vbios parsing from supervisor drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal drm/nouveau/disp/dp: create subclass for dp outputs ...

gpu: ipu-v3: Register the CSI modules

2014-06-04T09:07:12Z

This patch registers the two CSI platform devices per IPU. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel

gpu: ipu-v3: Add CSI and SMFC module enable wrappers

2014-06-04T09:07:11Z

IPU_CONF_..._EN bits are implementation details, not to be made public. Add wrappers around ipu_module_enable/disable, so the CSI V4L2 driver can enable/disable the CSI and SMFC modules. Signed-off-by: Philipp Zabel

gpu: ipu-v3: Add ipu_idmac_get_current_buffer function

2014-06-04T09:07:11Z

This function returns the currently active buffer (0 or 1) of a double buffered IDMAC channel. It is to be used by the CSI driver. Signed-off-by: Philipp Zabel

gpu: ipu-v3: Add SMFC code

2014-06-04T09:07:10Z

The Sensor Multi Fifo Controller (SMFC) is used as a buffer between the two CSIs (writing simultaneously) and up to four IDMAC channels. Signed-off-by: Philipp Zabel

gpu: ipu-v3: Move i.MX IPUv3 core driver out of staging

2014-06-04T09:06:52Z

The i.MX Image Processing Unit (IPU) contains a number of image processing blocks that sit right in the middle between DRM and V4L2. Some of the modules, such as Display Controller, Processor, and Interface (DC, DP, DI) or CMOS Sensor Interface (CSI) and their FIFOs could be assigned to either framework, but others, such as the dma controller (IDMAC) and image converter (IC) can be used by both. The IPUv3 core driver provides an internal API to access the modules, to be used by both DRM and V4L2 IPUv3 drivers. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel Acked-by: Greg Kroah-Hartman

OMAPDSS: Add DSS features for AM43xx

2014-05-09T12:11:26Z

Add DSS features for AM43xx. Signed-off-by: Sathya Prakash M R Acked-by: Tony Lindgren Signed-off-by: Tomi Valkeinen

OMAPDSS: remove unused macros

2014-05-09T10:25:41Z

Macros to_dss_driver() and to_dss_device() are no longer used, and the latter doesn't even work. Remove them. Signed-off-by: Tomi Valkeinen

video: omap2dss: fix LPAE warnings

2014-05-09T09:55:18Z

If LPAE is enabled, dma_addr_t is 64 bit, so we have to change a few type for everything in this driver to match again. Signed-off-by: Arnd Bergmann Signed-off-by: Peter Griffin Cc: Jean-Christophe Plagniol-Villard Cc: Tomi Valkeinen Cc: linux-fbdev@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Tomi Valkeinen

Merge tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

2014-04-07T17:47:51Z

Pull OMAP fbdev changes from Tomi Valkeinen: "This is based on the already pulled fbdev-main changes, and this also merges .dts branch from Tony Lindgren (which has also been pulled), so that I was able to add the display related .dts changes. This contains OMAP related fbdev changes for 3.15. The bulk of the patches are for adding Device Tree support for OMAP Display Subsystem: - SoCs: OMAP2/3/4 - Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM, OMAP3 IGEP0020, OMAP3 N900 - Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and Analog TV connectors" * tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits) OMAPDSS: HDMI: fix interlace output OMAPDSS: add missing __init for dss_init_ports ARM: OMAP2+: remove pdata quirks for displays OMAPDSS: remove DT hacks for regulators Doc/DT: Add DT binding documentation for tpd12s015 encoder Doc/DT: Add DT binding documentation for TFP410 encoder Doc/DT: Add DT binding documentation for Sony acx565akm panel Doc/DT: Add DT binding documentation for MIPI DSI CM Panel Doc/DT: Add DT binding documentation for HDMI Connector Doc/DT: Add DT binding documentation for DVI Connector Doc/DT: Add DT binding documentation for Analog TV Connector ARM: omap3-n900.dts: add display information ARM: omap3-igep0020.dts: add display information ARM: omap3-beagle-xm.dts: add display information ARM: omap3-beagle.dts: add display information ARM: omap4-sdp.dts: add display information Doc/DT: Add DT binding documentation for OMAP DSS OMAPDSS: acx565akm: Add DT support OMAPDSS: connector-analog-tv: Add DT support OMAPDSS: hdmi-connector: Add DT support ...