linux/include/xen/interface, branch v5.1

xen/pvh: Add memory map pointer to hvm_start_info struct

2018-12-13T18:41:49Z

The start info structure that is defined as part of the x86/HVM direct boot ABI and used for starting Xen PVH guests would be more versatile if it also included a way to pass information about the memory map to the guest. This would allow KVM guests to share the same entry point. Signed-off-by: Maran Wilson Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky

x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c

2018-09-03T14:50:33Z

There are some PV specific functions in arch/x86/xen/mmu.c which can be moved to mmu_pv.c. This in turn enables to build multicalls.c dependent on CONFIG_XEN_PV. Signed-off-by: Juergen Gross Signed-off-by: Thomas Gleixner Reviewed-by: Boris Ostrovsky Cc: xen-devel@lists.xenproject.org Cc: virtualization@lists.linux-foundation.org Cc: akataria@vmware.com Cc: rusty@rustcorp.com.au Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180828074026.820-3-jgross@suse.com

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2018-08-18T23:48:07Z

Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...

docs: Fix some broken references

2018-06-15T21:10:01Z

As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai Acked-by: Masami Hiramatsu Acked-by: Stephen Boyd Acked-by: Charles Keepax Acked-by: Mathieu Poirier Reviewed-by: Coly Li Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet

xen: Sync up with the canonical protocol definitions in Xen

2018-06-12T22:10:26Z

This is the sync up with the canonical definitions of the input, sound and display protocols in Xen. Changes to kbdif: 1. Add missing string constants for {feature|request}-raw-pointer to align with the rest of the interface file. 2. Add new XenStore feature fields, so it is possible to individually control set of exposed virtual devices for each guest OS: - set feature-disable-keyboard to 1 if no keyboard device needs to be created - set feature-disable-pointer to 1 if no pointer device needs to be created 3. Move multi-touch device parameters to backend nodes: these are described as a part of frontend's XenBus configuration nodes while they belong to backend's configuration. Fix this by moving the parameters to the proper section. Unique-id field: 1. Add unique-id XenBus entry for virtual input and display. 2. Change type of unique-id field to string for sndif to align with display and input protocols. Signed-off-by: Oleksandr Andrushchenko Reviewed-by: Juergen Gross Signed-off-by: Dmitry Torokhov

xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE

2018-05-14T13:25:37Z

My recent Xen patch series introduces a new HYPERVISOR_memory_op to support direct priv-mapping of certain guest resources (such as ioreq pages, used by emulators) by a tools domain, rather than having to access such resources via the guest P2M. This patch adds the necessary infrastructure to the privcmd driver and Xen MMU code to support direct resource mapping. NOTE: The adjustment in the MMU code is partially cosmetic. Xen will now allow a PV tools domain to map guest pages either by GFN or MFN, thus the term 'mfn' has been swapped for 'pfn' in the lower layers of the remap code. Signed-off-by: Paul Durrant Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross

xen/sndif: Sync up with the canonical definition in Xen

2018-04-17T12:26:33Z

This is the sync up with the canonical definition of the sound protocol in Xen: 1. Protocol version was referenced in the protocol description, but missed its definition. Fixed by adding a constant for current protocol version. 2. Some of the request descriptions have "reserved" fields missed: fixed by adding corresponding entries. 3. Extend the size of the requests and responses to 64 octets. Bump protocol version to 2. 4. Add explicit back and front synchronization In order to provide explicit synchronization between backend and frontend the following changes are introduced in the protocol: - add new ring buffer for sending asynchronous events from backend to frontend to report number of bytes played by the frontend (XENSND_EVT_CUR_POS) - introduce trigger events for playback control: start/stop/pause/resume - add "req-" prefix to event-channel and ring-ref to unify naming of the Xen event channels for requests and events 5. Add explicit back and front parameter negotiation In order to provide explicit stream parameter negotiation between backend and frontend the following changes are introduced in the protocol: add XENSND_OP_HW_PARAM_QUERY request to read/update configuration space for the parameters given: request passes desired parameter's intervals/masks and the response to this request returns allowed min/max intervals/masks to be used. Signed-off-by: Oleksandr Andrushchenko Signed-off-by: Oleksandr Grytsov Reviewed-by: Konrad Rzeszutek Wilk Reviewed-by: Boris Ostrovsky Cc: Konrad Rzeszutek Wilk Cc: Takashi Iwai Signed-off-by: Boris Ostrovsky

xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen

2018-04-10T13:22:22Z

Pre-4.17 kernels ignored start_info's rsdp_paddr pointer and instead relied on finding RSDP in standard location in BIOS RO memory. This has worked since that's where Xen used to place it. However, with recent Xen change (commit 4a5733771e6f ("libxl: put RSDP for PVH guest near 4GB")) it prefers to keep RSDP at a "non-standard" address. Even though as of commit b17d9d1df3c3 ("x86/xen: Add pvh specific rsdp address retrieval function") Linux is able to find RSDP, for back-compatibility reasons we need to indicate to Xen that we can handle this, an we do so by setting XENFEAT_linux_rsdp_unrestricted flag in ELF notes. (Also take this opportunity and sync features.h header file with Xen) Signed-off-by: Boris Ostrovsky Reviewed-by: Juergen Gross Reviewed-by: Wei Liu

Merge tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2017-11-16T21:06:27Z

Pull xen updates from Juergen Gross: "Xen features and fixes for v4.15-rc1 Apart from several small fixes it contains the following features: - a series by Joao Martins to add vdso support of the pv clock interface - a series by Juergen Gross to add support for Xen pv guests to be able to run on 5 level paging hosts - a series by Stefano Stabellini adding the Xen pvcalls frontend driver using a paravirtualized socket interface" * tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits) xen/pvcalls: fix potential endless loop in pvcalls-front.c xen/pvcalls: Add MODULE_LICENSE() MAINTAINERS: xen, kvm: track pvclock-abi.h changes x86/xen/time: setup vcpu 0 time info page x86/xen/time: set pvclock flags on xen_time_init() x86/pvclock: add setter for pvclock_pvti_cpu0_va ptp_kvm: probe for kvm guest availability xen/privcmd: remove unused variable pageidx xen: select grant interface version xen: update arch/x86/include/asm/xen/cpuid.h xen: add grant interface version dependent constants to gnttab_ops xen: limit grant v2 interface to the v1 functionality xen: re-introduce support for grant v2 interface xen: support priv-mapping in an HVM tools domain xen/pvcalls: remove redundant check for irq >= 0 xen/pvcalls: fix unsigned less than zero error check xen/time: Return -ENODEV from xen_get_wallclock() xen/pvcalls-front: mark expected switch fall-through xen: xenbus_probe_frontend: mark expected switch fall-throughs xen/time: do not decrease steal time after live migration on xen ...

x86/xen/time: setup vcpu 0 time info page

2017-11-08T21:33:14Z

In order to support pvclock vdso on xen we need to setup the time info page for vcpu 0 and register the page with Xen using the VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall will also forcefully update the pvti which will set some of the necessary flags for vdso. Afterwards we check if it supports the PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having vdso/vsyscall support. And if so, it will set the cpu 0 pvti that will be later on used when mapping the vdso image. The xen headers are also updated to include the new hypercall for registering the secondary vcpu_time_info struct. Signed-off-by: Joao Martins Reviewed-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: Boris Ostrovsky