linux/include, branch v6.14

keys: Fix UAF in key_put()

2025-03-22T13:36:49Z

Once a key's reference count has been reduced to 0, the garbage collector thread may destroy it at any time and so key_put() is not allowed to touch the key after that point. The most key_put() is normally allowed to do is to touch key_gc_work as that's a static global variable. However, in an effort to speed up the reclamation of quota, this is now done in key_put() once the key's usage is reduced to 0 - but now the code is looking at the key after the deadline, which is forbidden. Fix this by using a flag to indicate that a key can be gc'd now rather than looking at the key's refcount in the garbage collector. Fixes: 9578e327b2b4 ("keys: update key quotas in key_put()") Reported-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/673b6aec.050a0220.87769.004a.GAE@google.com/ Signed-off-by: David Howells Tested-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com Reviewed-by: Oleg Nesterov Signed-off-by: Jarkko Sakkinen

Merge tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-03-20T16:39:15Z

Pull networking fixes from Paolo Abeni: "Including fixes from can, bluetooth and ipsec. This contains a last minute revert of a recent GRE patch, mostly to allow me stating there are no known regressions outstanding. Current release - regressions: - revert "gre: Fix IPv6 link-local address generation." - eth: ti: am65-cpsw: fix NAPI registration sequence Previous releases - regressions: - ipv6: fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). - mptcp: fix data stream corruption in the address announcement - bluetooth: fix connection regression between LE and non-LE adapters - can: - flexcan: only change CAN state when link up in system PM - ucan: fix out of bound read in strscpy() source Previous releases - always broken: - lwtunnel: fix reentry loops - ipv6: fix TCP GSO segmentation with NAT - xfrm: force software GSO only in tunnel mode - eth: ti: icssg-prueth: add lock to stats Misc: - add Andrea Mayer as a maintainer of SRv6" * tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits) MAINTAINERS: Add Andrea Mayer as a maintainer of SRv6 Revert "gre: Fix IPv6 link-local address generation." Revert "selftests: Add IPv6 link-local address generation tests for GRE devices." net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES tools headers: Sync uapi/asm-generic/socket.h with the kernel sources mptcp: Fix data stream corruption in the address announcement selftests: net: test for lwtunnel dst ref loops net: ipv6: ioam6: fix lwtunnel_output() loop net: lwtunnel: fix recursion loops net: ti: icssg-prueth: Add lock to stats net: atm: fix use after free in lec_send() xsk: fix an integer overflow in xp_create_and_assign_umem() net: stmmac: dwc-qos-eth: use devm_kzalloc() for AXI data selftests: drv-net: use defer in the ping test phy: fix xa_alloc_cyclic() error handling dpll: fix xa_alloc_cyclic() error handling devlink: fix xa_alloc_cyclic() error handling ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create(). ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). net: ipv6: fix TCP GSO segmentation with NAT ...

Merge tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth

2025-03-19T18:44:05Z

Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_event: Fix connection regression between LE and non-LE adapters - Fix error code in chan_alloc_skb_cb() * tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters Bluetooth: Fix error code in chan_alloc_skb_cb() ==================== Link: https://patch.msgid.link/20250314163847.110069-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni

Merge tag 'ata-6.14-final' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

2025-03-19T14:31:43Z

Pull ata fix from Niklas Cassel: - Fix a regression on ATI AHCI controllers, where certain Samsung drives fails to be detected on a warm boot when LPM is enabled. LPM on ATI AHCI works fine with other drives. Likewise, the Samsung drives works fine with LPM with other AHI controllers. Thus, just like the weirdo ATA_QUIRK_NO_NCQ_ON_ATI quirk, add a new ATA_QUIRK_NO_LPM_ON_ATI quirk to disable LPM only on ATI AHCI controllers. * tag 'ata-6.14-final' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs

net: mana: Support holes in device list reply msg

2025-03-18T10:32:15Z

According to GDMA protocol, holes (zeros) are allowed at the beginning or middle of the gdma_list_devices_resp message. The existing code cannot properly handle this, and may miss some devices in the list. To fix, scan the entire list until the num_of_devs are found, or until the end of the list. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang Reviewed-by: Long Li Reviewed-by: Shradha Gupta Reviewed-by: Michal Swiatkowski Link: https://patch.msgid.link/1741723974-1534-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni

ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs

2025-03-18T09:11:28Z

Before commit 7627a0edef54 ("ata: ahci: Drop low power policy board type") the ATI AHCI controllers specified board type 'board_ahci' rather than board type 'board_ahci'. This means that LPM was historically not enabled for the ATI AHCI controllers. By looking at commit 7a8526a5cd51 ("libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD."), it is clear that, for some unknown reason, that Samsung SSDs do not play nice with ATI AHCI controllers. (When using other AHCI controllers, NCQ can be enabled on these Samsung SSDs without issues.) In a similar way, from user reports, it is clear the ATI AHCI controllers can enable LPM on e.g. Maxtor HDDs perfectly fine, but when enabling LPM on certain Samsung SSDs, things break. (E.g. the SSDs will not get detected by the ATI AHCI controller even after a COMRESET.) Yet, when using LPM on these Samsung SSDs with other AHCI controllers, e.g. Intel AHCI controllers, these Samsung drives appear to work perfectly fine. Considering that the combination of ATI + Samsung, for some unknown reason, does not seem to work well, disable LPM when detecting an ATI AHCI controller with a problematic Samsung SSD. Apply this new ATA_QUIRK_NO_LPM_ON_ATI quirk for all Samsung SSDs that have already been reported to not play nice with ATI (ATA_QUIRK_NO_NCQ_ON_ATI). Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Suggested-by: Hans de Goede Reported-by: Eric Closes: https://lore.kernel.org/linux-ide/Z8SBZMBjvVXA7OAK@eldamar.lan/ Tested-by: Eric Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20250317170348.1748671-2-cassel@kernel.org Signed-off-by: Niklas Cassel

Merge tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-03-18T05:27:27Z

Pull misc hotfixes from Andrew Morton: "15 hotfixes. 7 are cc:stable and the remainder address post-6.13 issues or aren't considered necessary for -stable kernels. 13 are for MM and the other two are for squashfs and procfs. All are singletons. Please see the individual changelogs for details" * tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/page_alloc: fix memory accept before watermarks gets initialized mm: decline to manipulate the refcount on a slab page memcg: drain obj stock on cpu hotplug teardown mm/huge_memory: drop beyond-EOF folios with the right number of refs selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation mm: fix error handling in __filemap_get_folio() with FGP_NOWAIT mm: memcontrol: fix swap counter leak from offline cgroup mm/vma: do not register private-anon mappings with khugepaged during mmap squashfs: fix invalid pointer dereference in squashfs_cache_delete mm/migrate: fix shmem xarray update during migration mm/hugetlb: fix surplus pages in dissolve_free_huge_page() mm/damon/core: initialize damos->walk_completed in damon_new_scheme() mm/damon: respect core layer filters' allowance decision on ops layer filemap: move prefaulting out of hot write path proc: fix UAF in proc_get_inode()

mm: decline to manipulate the refcount on a slab page

2025-03-17T00:40:26Z

Slab pages now have a refcount of 0, so nobody should be trying to manipulate the refcount on them. Doing so has little effect; the object could be freed and reallocated to a different purpose, although the slab itself would not be until the refcount was put making it behave rather like TYPESAFE_BY_RCU. Unfortunately, __iov_iter_get_pages_alloc() does take a refcount. Fix that to not change the refcount, and make put_page() silently not change the refcount. get_page() warns so that we can fix any other callers that need to be changed. Long-term, networking needs to stop taking a refcount on the pages that it uses and rely on the caller to hold whatever references are necessary to make the memory stable. In the medium term, more page types are going to hav a zero refcount, so we'll want to move get_page() and put_page() out of line. Link: https://lkml.kernel.org/r/20250310143544.1216127-1-willy@infradead.org Fixes: 9aec2fb0fd5e (slab: allocate frozen pages) Signed-off-by: Matthew Wilcox (Oracle) Reported-by: Hannes Reinecke Closes: https://lore.kernel.org/all/08c29e4b-2f71-4b6d-8046-27e407214d8c@suse.com/ Acked-by: Vlastimil Babka Signed-off-by: Andrew Morton

mm: memcontrol: fix swap counter leak from offline cgroup

2025-03-17T00:40:24Z

Commit 6769183166b3 removed the parameter of id from swap_cgroup_record() and get the memcg id from mem_cgroup_id(folio_memcg(folio)). However, the caller of it may update a different memcg's counter instead of folio_memcg(folio). E.g. in the caller of mem_cgroup_swapout(), @swap_memcg could be different with @memcg and update the counter of @swap_memcg, but swap_cgroup_record() records the wrong memcg's ID. When it is uncharged from __mem_cgroup_uncharge_swap(), the swap counter will leak since the wrong recorded ID. Fix it by bringing the parameter of id back. Link: https://lkml.kernel.org/r/20250306023133.44838-1-songmuchun@bytedance.com Fixes: 6769183166b3 ("mm/swap_cgroup: decouple swap cgroup recording and clearing") Signed-off-by: Muchun Song Reviewed-by: Kairui Song Cc: Chris Li Cc: Johannes Weiner Cc: Michal Hocko Cc: Roman Gushchin Cc: Shakeel Butt Signed-off-by: Andrew Morton

mm/damon: respect core layer filters' allowance decision on ops layer

2025-03-17T00:40:23Z

Filtering decisions are made in filters evaluation order. Once a decision is made by a filter, filters that scheduled to be evaluated after the decision-made filter should just respect it. This is the intended and documented behavior. Since core layer-handled filters are evaluated before operations layer-handled filters, decisions made on core layer should respected by ops layer. In case of reject filters, the decision is respected, since core layer-rejected regions are not passed to ops layer. But in case of allow filters, ops layer filters don't know if the region has passed to them because it was allowed by core filters or just because it didn't match to any core layer. The current wrong implementation assumes it was due to not matched by any core filters. As a reuslt, the decision is not respected. Pass the missing information to ops layer using a new filed in 'struct damos', and make the ops layer filters respect it. Link: https://lkml.kernel.org/r/20250228175336.42781-1-sj@kernel.org Fixes: 491fee286e56 ("mm/damon/core: support damos_filter->allow") Signed-off-by: SeongJae Park Signed-off-by: Andrew Morton