linux/init/main.c, branch v3.1

bootup: move 'usermodehelper_enable()' a little earlier

2011-09-30T02:21:01Z

Commit d5767c53535a ("bootup: move 'usermodehelper_enable()' to the end of do_basic_setup()") moved 'usermodehelper_enable()' to end of do_basic_setup() to after the initcalls. But then I get failed to let uvesafb work on my computer, and lose the splash boot. So maybe we could start usermodehelper_enable a little early to make some task work that need eary init with the help of user mode. [ I would *really* prefer that initcalls not call into user space - even the real 'init' hasn't been execve'd yet, after all! But for uvesafb it really does look like we don't have much choice. I considered doing this when we mount the root filesystem, but depending on config options that is in multiple places. We could do the usermode helper enable as a rootfs_initcall().. So I'm just using wang yanqing's trivial patch. It's not wonderful, but it's simple and should work. We should revisit this some day, though. - Linus ] Signed-off-by: Linus Torvalds

bootup: move 'usermodehelper_enable()' to the end of do_basic_setup()

2011-09-28T17:23:44Z

Doing it just before starting to call into cpu_idle() made a sick kind of sense only because the original bug we fixed (see commit 288d5abec831: "Boot up with usermodehelper disabled") was about problems with some scheduler data structures not being initialized, and they had better be initialized at that point. But it really didn't make any other conceptual sense, and doing it after the initial "schedule()" call for the idle thread actually opened up a race: what if the main initialization thread did everything without needing to sleep, and got all the way into user land too? Without actually having scheduled back to the idle thread? Now, in normal circumstances that doesn't ever happen, but it looks like Richard Cochran triggered exactly that on his ARM IXP4xx machines: "I have some ARM IXP4xx based machines that use the two on chip MAC ports (aka NPEs). The NPE needs a firmware in order to function. Ever since the following commit [that 288d5abec831 one], it is no longer possible to bring up the interfaces during the init scripts." with a call trace showing an ioctl coming from user space. Richard says: "The init is busybox, and the startup script does mount, syslogd, and then ifup, so that all can go by quickly." The fix is to move the usermodehelper_enable() into the main 'init' thread, and just put it after we've done all our initcalls. By then, everything really should be up, but we've obviously not actually started the user-mode portion of init yet. Reported-and-tested-by: Richard Cochran Signed-off-by: Linus Torvalds

init: carefully handle loglevel option on kernel cmdline.

2011-09-21T20:18:52Z

When a malformed loglevel value (for example "${abc}") is passed on the kernel cmdline, the loglevel itself is being set to 0. That then suppresses all following messages, including all the errors and crashes caused by other malformed cmdline options. This could make debugging process quite tricky. This patch leaves the previous value of loglevel if the new value is incorrect and reports an error code in this case. Signed-off-by: Alexander Sverdlin Signed-off-by: Linus Torvalds

Boot up with usermodehelper disabled

2011-08-04T08:03:29Z

The core device layer sends tons of uevent notifications for each device it finds, and if the kernel has been built with a non-empty CONFIG_UEVENT_HELPER_PATH that will make us try to execute the usermode helper binary for all these events very early in the boot. Not only won't the root filesystem even be mounted at that point, we literally won't have necessarily even initialized all the process handling data structures at that point, which causes no end of silly problems even when the usermode helper doesn't actually succeed in executing. So just use our existing infrastructure to disable the usermodehelpers to make the kernel start out with them disabled. We enable them when we've at least initialized stuff a bit. Problems related to an uninitialized init_ipc_ns.ids[IPC_SHM_IDS].rw_mutex reported by various people. Reported-by: Manuel Lauss Reported-by: Richard Weinberger Reported-by: Marc Zyngier Acked-by: Kay Sievers Cc: Andrew Morton Cc: Vasiliy Kulikov Cc: Greg KH Signed-off-by: Linus Torvalds

tmpfs: miscellaneous trivial cleanups

2011-08-04T00:25:23Z

While it's at its least, make a number of boring nitpicky cleanups to shmem.c, mostly for consistency of variable naming. Things like "swap" instead of "entry", "pgoff_t index" instead of "unsigned long idx". And since everything else here is prefixed "shmem_", better change init_tmpfs() to shmem_init(). Signed-off-by: Hugh Dickins Acked-by: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

generic-ipi: Fix kexec boot crash by initializing call_single_queue before enabling interrupts

2011-06-17T08:17:12Z

There is a problem that kdump(2nd kernel) sometimes hangs up due to a pending IPI from 1st kernel. Kernel panic occurs because IPI comes before call_single_queue is initialized. To fix the crash, rename init_call_single_data() to call_function_init() and call it in start_kernel() so that call_single_queue can be initialized before enabling interrupts. The details of the crash are: (1) 2nd kernel boots up (2) A pending IPI from 1st kernel comes when irqs are first enabled in start_kernel(). (3) Kernel tries to handle the interrupt, but call_single_queue is not initialized yet at this point. As a result, in the generic_smp_call_function_single_interrupt(), NULL pointer dereference occurs when list_replace_init() tries to access &q->list.next. Therefore this patch changes the name of init_call_single_data() to call_function_init() and calls it before local_irq_enable() in start_kernel(). Signed-off-by: Takao Indoh Reviewed-by: WANG Cong Acked-by: Neil Horman Acked-by: Vivek Goyal Acked-by: Peter Zijlstra Cc: Milton Miller Cc: Jens Axboe Cc: Paul E. McKenney Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.com Signed-off-by: Ingo Molnar

mm: Fix boot crash in mm_alloc()

2011-05-29T18:32:28Z

Thomas Gleixner reports that we now have a boot crash triggered by CONFIG_CPUMASK_OFFSTACK=y: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] find_next_bit+0x55/0xb0 Call Trace: [] cpumask_any_but+0x2a/0x70 [] flush_tlb_mm+0x2b/0x80 [] pud_populate+0x35/0x50 [] pgd_alloc+0x9a/0xf0 [] mm_init+0xec/0x120 [] mm_alloc+0x53/0xd0 which was introduced by commit de03c72cfce5 ("mm: convert mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of mm_init() vs mm_init_cpumask Thomas wrote a patch to just fix the ordering of initialization, but I hate the new double allocation in the fork path, so I ended up instead doing some more radical surgery to clean it all up. Reported-by: Thomas Gleixner Reported-by: Ingo Molnar Cc: KOSAKI Motohiro Cc: Andrew Morton Signed-off-by: Linus Torvalds

printk: allocate kernel log buffer earlier

2011-05-25T15:39:48Z

On larger systems, because of the numerous ACPI, Bootmem and EFI messages, the static log buffer overflows before the larger one specified by the log_buf_len param is allocated. Minimize the overflow by allocating the new log buffer as soon as possible. On kernels without memblock, a later call to setup_log_buf from kernel/init.c is the fallback. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_PRINTK=n build] Signed-off-by: Mike Travis Cc: Yinghai Lu Cc: "H. Peter Anvin" Cc: Jack Steiner Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: convert mm->cpu_vm_cpumask into cpumask_var_t

2011-05-25T15:39:21Z

cpumask_t is very big struct and cpu_vm_mask is placed wrong position. It might lead to reduce cache hit ratio. This patch has two change. 1) Move the place of cpumask into last of mm_struct. Because usually cpumask is accessed only front bits when the system has cpu-hotplug capability 2) Convert cpu_vm_mask into cpumask_var_t. It may help to reduce memory footprint if cpumask_size() will use nr_cpumask_bits properly in future. In addition, this patch change the name of cpu_vm_mask with cpu_vm_mask_var. It may help to detect out of tree cpu_vm_mask users. This patch has no functional change. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: KOSAKI Motohiro Cc: David Howells Cc: Koichi Yasutake Cc: Hugh Dickins Cc: Chris Metcalf Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kmemleak: Initialise kmemleak after debug_objects_mem_init()

2011-05-19T16:36:37Z

Kmemleak frees objects via RCU and when CONFIG_DEBUG_OBJECTS_RCU_HEAD is enabled, the RCU callback triggers a call to free_object() in lib/debugobjects.c. Since kmemleak is initialised before debug objects initialisation, it may result in a kernel panic during booting. This patch moves the kmemleak_init() call after debug_objects_mem_init(). Reported-by: Marcin Slusarz Tested-by: Tejun Heo Signed-off-by: Catalin Marinas Cc: