linux/init/main.c, branch v3.13

Revert "mm: create a separate slab for page->ptl allocation"

2013-11-20T22:41:47Z

This reverts commit ea1e7ed33708c7a760419ff9ded0a6cb90586a50. Al points out that while the commit *does* actually create a separate slab for the page->ptl allocation, that slab is never actually used, and the code continues to use kmalloc/kfree. Damien Wyart points out that the original patch did have the conversion to use kmem_cache_alloc/free, so it got lost somewhere on its way to me. Revert the half-arsed attempt that didn't do anything. If we really do want the special slab (remember: this is all relevant just for debug builds, so it's not necessarily all that critical) we might as well redo the patch fully. Reported-by: Al Viro Acked-by: Andrew Morton Cc: Kirill A Shutemov Signed-off-by: Linus Torvalds

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2013-11-15T04:27:50Z

Pull module updates from Rusty Russell: "Mainly boring here, too. rmmod --wait finally removed, though" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: modpost: fix bogus 'exported twice' warnings. init: fix in-place parameter modification regression asmlinkage, module: Make ksymtab and kcrctab symbols and __this_module __visible kernel: add support for init_array constructors modpost: Optionally ignore secondary errors seen if a single module build fails module: remove rmmod --wait option.

mm: create a separate slab for page->ptl allocation

2013-11-15T00:32:20Z

If DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC are enabled spinlock_t on x86_64 is 72 bytes. For page->ptl they will be allocated from kmalloc-96 slab, so we loose 24 on each. An average system can easily allocate few tens thousands of page->ptl and overhead is significant. Let's create a separate slab for page->ptl allocation to solve this. Signed-off-by: Kirill A. Shutemov Cc: Peter Zijlstra Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2013-11-13T08:40:34Z

Pull networking updates from David Miller: 1) The addition of nftables. No longer will we need protocol aware firewall filtering modules, it can all live in userspace. At the core of nftables is a, for lack of a better term, virtual machine that executes byte codes to inspect packet or metadata (arriving interface index, etc.) and make verdict decisions. Besides support for loading packet contents and comparing them, the interpreter supports lookups in various datastructures as fundamental operations. For example sets are supports, and therefore one could create a set of whitelist IP address entries which have ACCEPT verdicts attached to them, and use the appropriate byte codes to do such lookups. Since the interpreted code is composed in userspace, userspace can do things like optimize things before giving it to the kernel. Another major improvement is the capability of atomically updating portions of the ruleset. In the existing netfilter implementation, one has to update the entire rule set in order to make a change and this is very expensive. Userspace tools exist to create nftables rules using existing netfilter rule sets, but both kernel implementations will need to co-exist for quite some time as we transition from the old to the new stuff. Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have worked so hard on this. 2) Daniel Borkmann and Hannes Frederic Sowa made several improvements to our pseudo-random number generator, mostly used for things like UDP port randomization and netfitler, amongst other things. In particular the taus88 generater is updated to taus113, and test cases are added. 3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet and Yang Yingliang. 4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin Sujir. 5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet, Neal Cardwell, and Yuchung Cheng. 6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary control message data, much like other socket option attributes. From Francesco Fusco. 7) Allow applications to specify a cap on the rate computed automatically by the kernel for pacing flows, via a new SO_MAX_PACING_RATE socket option. From Eric Dumazet. 8) Make the initial autotuned send buffer sizing in TCP more closely reflect actual needs, from Eric Dumazet. 9) Currently early socket demux only happens for TCP sockets, but we can do it for connected UDP sockets too. Implementation from Shawn Bohrer. 10) Refactor inet socket demux with the goal of improving hash demux performance for listening sockets. With the main goals being able to use RCU lookups on even request sockets, and eliminating the listening lock contention. From Eric Dumazet. 11) The bonding layer has many demuxes in it's fast path, and an RCU conversion was started back in 3.11, several changes here extend the RCU usage to even more locations. From Ding Tianhong and Wang Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav Falico. 12) Allow stackability of segmentation offloads to, in particular, allow segmentation offloading over tunnels. From Eric Dumazet. 13) Significantly improve the handling of secret keys we input into the various hash functions in the inet hashtables, TCP fast open, as well as syncookies. From Hannes Frederic Sowa. The key fundamental operation is "net_get_random_once()" which uses static keys. Hannes even extended this to ipv4/ipv6 fragmentation handling and our generic flow dissector. 14) The generic driver layer takes care now to set the driver data to NULL on device removal, so it's no longer necessary for drivers to explicitly set it to NULL any more. Many drivers have been cleaned up in this way, from Jingoo Han. 15) Add a BPF based packet scheduler classifier, from Daniel Borkmann. 16) Improve CRC32 interfaces and generic SKB checksum iterators so that SCTP's checksumming can more cleanly be handled. Also from Daniel Borkmann. 17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces using the interface MTU value. This helps avoid PMTU attacks, particularly on DNS servers. From Hannes Frederic Sowa. 18) Use generic XPS for transmit queue steering rather than internal (re-)implementation in virtio-net. From Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) random32: add test cases for taus113 implementation random32: upgrade taus88 generator to taus113 from errata paper random32: move rnd_state to linux/random.h random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized random32: add periodic reseeding random32: fix off-by-one in seeding requirement PHY: Add RTL8201CP phy_driver to realtek xtsonic: add missing platform_set_drvdata() in xtsonic_probe() macmace: add missing platform_set_drvdata() in mace_probe() ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe() ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh vlan: Implement vlan_dev_get_egress_qos_mask as an inline. ixgbe: add warning when max_vfs is out of range. igb: Update link modes display in ethtool netfilter: push reasm skb through instead of original frag skbs ip6_output: fragment outgoing reassembled skb properly MAINTAINERS: mv643xx_eth: take over maintainership from Lennart net_sched: tbf: support of 64bit rates ixgbe: deleting dfwd stations out of order can cause null ptr deref ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS ...

init: make init failures more explicit

2013-11-13T03:09:26Z

This patch proposes to make init failures more explicit. Before this, the "No init found" message didn't help much. It could sometimes be misleading and actually mean "No *working* init found". This message could hide many different issues: - no init program candidates found at all - some init program candidates exist but can't be executed (missing execute permissions, failed to load shared libraries, executable compiled for an unknown architecture...) This patch notifies the kernel user when a candidate init program is found but can't be executed. In each failure situation, the error code is displayed, to quickly find the root cause. "No init found" is also replaced by "No working init found", which is more correct. This will help embedded Linux developers (especially the newcomers), regularly making and debugging new root filesystems. Credits to Geert Uytterhoeven and Janne Karhunen for their improvement suggestions. Signed-off-by: Michael Opdenacker Cc: Geert Uytterhoeven Tested-by: Janne Karhunen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

init/main.c: remove prototype for softirq_init()

2013-11-13T03:09:13Z

It's already available in Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

init: fix in-place parameter modification regression

2013-10-31T03:19:13Z

Before commit 026cee0086fe1df4cf74691cf273062cc769617d ("params: _initcall-like kernel parameters") the __setup parameter parsing code could modify parameter in the static_command_line buffer and such modifications were kept. After that commit such modifications are destroyed during per-initcall level parameter parsing because the same static_command_line buffer is used and only parameters for appropriate initcall level are parsed. That change broke at least parsing "ubd" parameter in the ubd driver when the COW file is used. Now the separate buffer is used for per-initcall parameter parsing. Signed-off-by: Krzysztof Mazur Signed-off-by: Rusty Russell

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2013-10-23T20:49:34Z

Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller

static_key: WARN on usage before jump_label_init was called

2013-10-19T23:45:35Z

Usage of the static key primitives to toggle a branch must not be used before jump_label_init() is called from init/main.c. jump_label_init reorganizes and wires up the jump_entries so usage before that could have unforeseen consequences. Following primitives are now checked for correct use: * static_key_slow_inc * static_key_slow_dec * static_key_slow_dec_deferred * jump_label_rate_limit The x86 architecture already checks this by testing if the default_nop was already replaced with an optimal nop or with a branch instruction. It will panic then. Other architectures don't check for this. Because we need to relax this check for the x86 arch to allow code to transition from default_nop to the enabled state and other architectures did not check for this at all this patch introduces checking on the static_key primitives in a non-arch dependent manner. All checked functions are considered slow-path so the additional check does no harm to performance. The warnings are best observed with earlyprintk. Based on a patch from Andi Kleen. Cc: Steven Rostedt Cc: Peter Zijlstra Cc: Andi Kleen Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller

Merge branch 'core/urgent' into sched/core

2013-10-11T05:39:37Z

Merge in asm goto fix, to be able to apply the asm/rmwcc.h fix. Signed-off-by: Ingo Molnar