linux/init/main.c, branch v3.6

Revert "x86-64/efi: Use EFI to deal with platform wall clock"

2012-08-14T16:58:25Z

This reverts commit bacef661acdb634170a8faddbc1cf28e8f8b9eee. This commit has been found to cause serious regressions on a number of ASUS machines at the least. We probably need to provide a 1:1 map in addition to the EFI virtual memory map in order for this to work. Signed-off-by: H. Peter Anvin Reported-and-bisected-by: Jérôme Carretero Cc: Jan Beulich Cc: Matt Fleming Cc: Matthew Garrett Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu

mm/hotplug: correctly setup fallback zonelists when creating new pgdat

2012-08-01T01:42:44Z

When hotadd_new_pgdat() is called to create new pgdat for a new node, a fallback zonelist should be created for the new node. There's code to try to achieve that in hotadd_new_pgdat() as below: /* * The node we allocated has no zone fallback lists. For avoiding * to access not-initialized zonelist, build here. */ mutex_lock(&zonelists_mutex); build_all_zonelists(pgdat, NULL); mutex_unlock(&zonelists_mutex); But it doesn't work as expected. When hotadd_new_pgdat() is called, the new node is still in offline state because node_set_online(nid) hasn't been called yet. And build_all_zonelists() only builds zonelists for online nodes as: for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); build_zonelists(pgdat); build_zonelist_cache(pgdat); } Though we hope to create zonelist for the new pgdat, but it doesn't. So add a new parameter "pgdat" the build_all_zonelists() to build pgdat for the new pgdat too. Signed-off-by: Jiang Liu Signed-off-by: Xishi Qiu Cc: Mel Gorman Cc: Michal Hocko Cc: Minchan Kim Cc: Rusty Russell Cc: Yinghai Lu Cc: Tony Luck Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: David Rientjes Cc: Keping Chen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

2012-07-27T15:34:16Z

Pull cpumask changes from Rusty Russell: "Trivial comment changes to cpumask code. I guess it's getting boring." Boring is good. * tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: cpumask: cpulist_parse() comments correction init: add comments to keep initcall-names in sync with initcall levels cpumask: add a few comments of cpumask functions

init: add comments to keep initcall-names in sync with initcall levels

2012-07-26T23:59:42Z

main.c has initcall_level_names[] for parse_args to print in debug messages, add comments to keep them in sync with initcalls defined in init.h. Also add "loadable" into comment re not using *_initcall macros in modules, to disambiguate from kernel/params.c and other builtins. Signed-off-by: Jim Cromie Acked-by: Borislav Petkov Signed-off-by: Rusty Russell

Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-07-26T20:13:25Z

Pul x86/efi changes from Ingo Molnar: "This tree adds an EFI bootloader handover protocol, which, once supported on the bootloader side, will make bootup faster and might result in simpler bootloaders. The other change activates the EFI wall clock time accessors on x86-64 as well, instead of the legacy RTC readout." * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Handover Protocol x86-64/efi: Use EFI to deal with platform wall clock

switch fput to task_work_add

2012-07-22T19:57:58Z

... and schedule_work() for interrupt/kernel_thread callers (and yes, now it *is* OK to call from interrupt). We are guaranteed that __fput() will be done before we return to userland (or exit). Note that for fput() from a kernel thread we get an async behaviour; it's almost always OK, but sometimes you might need to have __fput() completed before you do anything else. There are two mechanisms for that - a general barrier (flush_delayed_fput()) and explicit __fput_sync(). Both should be used with care (as was the case for fput() from kernel threads all along). See comments in fs/file_table.c for details. Signed-off-by: Al Viro

init: Drop initcall level output

2012-06-08T05:28:14Z

9fb48c744ba6a ("params: add 3rd arg to option handler callback signature") added similar lines to dmesg: initlevel:0=early, 4 registered initcalls initlevel:1=core, 31 registered initcalls initlevel:2=postcore, 11 registered initcalls initlevel:3=arch, 7 registered initcalls initlevel:4=subsys, 40 registered initcalls initlevel:5=fs, 30 registered initcalls initlevel:6=device, 250 registered initcalls initlevel:7=late, 35 registered initcalls but they don't contain any info for the general user staring at dmesg. I'm very doubtful the count of initcalls registered per level helps anyone so drop that output completely. Cc: Jim Cromie Cc: Rusty Russell Cc: Jason Baron Signed-off-by: Borislav Petkov Signed-off-by: Rusty Russell

module_param: stop double-calling parameters.

2012-06-08T05:28:13Z

Commit 026cee0086fe1df4cf74691cf273062cc769617d "params: _initcall-like kernel parameters" set old-style module parameters to level 0. And we call those level 0 calls where we used to, early in start_kernel(). We also loop through the initcall levels and call the levelled module_params before the corresponding initcall. Unfortunately level 0 is early_init(), so we call the standard module_param calls twice. (Turns out most things don't care, but at least ubi.mtd does). Change the level to -1 for standard module_param calls. Reported-by: Benoît Thébaudeau Signed-off-by: Rusty Russell Cc: stable@kernel.org

x86-64/efi: Use EFI to deal with platform wall clock

2012-06-06T09:48:05Z

Other than ix86, x86-64 on EFI so far didn't set the {g,s}et_wallclock accessors to the EFI routines, thus incorrectly using raw RTC accesses instead. Simply removing the #ifdef around the respective code isn't enough, however: While so far early get-time calls were done in physical mode, this doesn't work properly for x86-64, as virtual addresses would still need to be set up for all runtime regions (which wasn't the case on the system I have access to), so instead the patch moves the call to efi_enter_virtual_mode() ahead (which in turn allows to drop all code related to calling efi-get-time in physical mode). Additionally the earlier calling of efi_set_executable() requires the CPA code to cope, i.e. during early boot it must be avoided to call cpa_flush_array(), as the first thing this function does is a BUG_ON(irqs_disabled()). Also make the two EFI functions in question here static - they're not being referenced elsewhere. Signed-off-by: Jan Beulich Tested-by: Matt Fleming Acked-by: Matthew Garrett Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/4FBFBF5F020000780008637F@nat28.tlf.novell.com Signed-off-by: Ingo Molnar

Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2012-05-22T23:02:13Z

Pull driver core updates from Greg Kroah-Hartman: "Here's the driver core, and other driver subsystems, pull request for the 3.5-rc1 merge window. Outside of a few minor driver core changes, we ended up with the following different subsystem and core changes as well, due to interdependancies on the driver core: - hyperv driver updates - drivers/memory being created and some drivers moved into it - extcon driver subsystem created out of the old Android staging switch driver code - dynamic debug updates - printk rework, and /dev/kmsg changes All of this has been tested in the linux-next releases for a few weeks with no reported problems. Signed-off-by: Greg Kroah-Hartman " Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed that a patch to the deleted drivers/misc/max8997-muic.c driver needs to be applied to this one. * tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits) uio_pdrv_genirq: get irq through platform resource if not set otherwise memory: tegra{20,30}-mc: Remove empty *_remove() printk() - isolate KERN_CONT users from ordinary complete lines sysfs: get rid of some lockdep false positives Drivers: hv: util: Properly handle version negotiations. Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp() memory: tegra{20,30}-mc: Use dev_err_ratelimited() driver core: Add dev_*_ratelimited() family Driver Core: don't oops with unregistered driver in driver_find_device() printk() - restore prefix/timestamp printing for multi-newline strings printk: add stub for prepend_timestamp() ARM: tegra30: Make MC optional in Kconfig ARM: tegra20: Make MC optional in Kconfig ARM: tegra30: MC: Remove unnecessary BUG*() ARM: tegra20: MC: Remove unnecessary BUG*() printk: correctly align __log_buf ARM: tegra30: Add Tegra Memory Controller(MC) driver ARM: tegra20: Add Tegra Memory Controller(MC) driver printk() - restore timestamp printing at console output printk() - do not merge continuation lines of different threads ...