linux/kernel/bpf/core.c, branch v5.10

bpf: Don't rely on GCC attribute((optimize)) to disable GCSE

2020-10-30T03:01:46Z

Commit 3193c0836 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()") introduced a __no_fgcse macro that expands to a function scope __attribute__((optimize("-fno-gcse"))), to disable a GCC specific optimization that was causing trouble on x86 builds, and was not expected to have any positive effect in the first place. However, as the GCC manual documents, __attribute__((optimize)) is not for production use, and results in all other optimization options to be forgotten for the function in question. This can cause all kinds of trouble, but in one particular reported case, it causes -fno-asynchronous-unwind-tables to be disregarded, resulting in .eh_frame info to be emitted for the function. This reverts commit 3193c0836, and instead, it disables the -fgcse optimization for the entire source file, but only when building for X86 using GCC with CONFIG_BPF_JIT_ALWAYS_ON disabled. Note that the original commit states that CONFIG_RETPOLINE=n triggers the issue, whereas CONFIG_RETPOLINE=y performs better without the optimization, so it is kept disabled in both cases. Fixes: 3193c0836f20 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()") Signed-off-by: Ard Biesheuvel Signed-off-by: Alexei Starovoitov Tested-by: Geert Uytterhoeven Reviewed-by: Nick Desaulniers Link: https://lore.kernel.org/lkml/CAMuHMdUg0WJHEcq6to0-eODpXPOywLot6UD2=GFHpzoj_hCoBQ@mail.gmail.com/ Link: https://lore.kernel.org/bpf/20201028171506.15682-2-ardb@kernel.org

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-10-16T01:42:13Z

Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...

bpf: Move prog->aux->linked_prog and trampoline into bpf_link on attach

2020-09-29T20:09:23Z

In preparation for allowing multiple attachments of freplace programs, move the references to the target program and trampoline into the bpf_tracing_link structure when that is created. To do this atomically, introduce a new mutex in prog->aux to protect writing to the two pointers to target prog and trampoline, and rename the members to make it clear that they are related. With this change, it is no longer possible to attach the same tracing program multiple times (detaching in-between), since the reference from the tracing program to the target disappears on the first attach. However, since the next patch will let the caller supply an attach target, that will also make it possible to attach to the same place multiple times. Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Alexei Starovoitov Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/160138355059.48470.2503076992210324984.stgit@toke.dk

bpf: Add bpf_seq_printf_btf helper

2020-09-29T01:26:58Z

A helper is added to allow seq file writing of kernel data structures using vmlinux BTF. Its signature is long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags); Flags and struct btf_ptr definitions/use are identical to the bpf_snprintf_btf helper, and the helper returns 0 on success or a negative error value. Suggested-by: Alexei Starovoitov Signed-off-by: Alan Maguire Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/1601292670-1616-8-git-send-email-alan.maguire@oracle.com

bpf: Add bpf_snprintf_btf helper

2020-09-29T01:26:58Z

A helper is added to support tracing kernel type information in BPF using the BPF Type Format (BTF). Its signature is long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags); struct btf_ptr * specifies - a pointer to the data to be traced - the BTF id of the type of data pointed to - a flags field is provided for future use; these flags are not to be confused with the BTF_F_* flags below that control how the btf_ptr is displayed; the flags member of the struct btf_ptr may be used to disambiguate types in kernel versus module BTF, etc; the main distinction is the flags relate to the type and information needed in identifying it; not how it is displayed. For example a BPF program with a struct sk_buff *skb could do the following: static struct btf_ptr b = { }; b.ptr = skb; b.type_id = __builtin_btf_type_id(struct sk_buff, 1); bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0); Default output looks like this: (struct sk_buff){ .transport_header = (__u16)65535, .mac_header = (__u16)65535, .end = (sk_buff_data_t)192, .head = (unsigned char *)0x000000007524fd8b, .data = (unsigned char *)0x000000007524fd8b, .truesize = (unsigned int)768, .users = (refcount_t){ .refs = (atomic_t){ .counter = (int)1, }, }, } Flags modifying display are as follows: - BTF_F_COMPACT: no formatting around type information - BTF_F_NONAME: no struct/union member names/types - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; equivalent to %px. - BTF_F_ZERO: show zero-valued struct/union members; they are not displayed by default Signed-off-by: Alan Maguire Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/1601292670-1616-4-git-send-email-alan.maguire@oracle.com

bpf, x64: rework pro/epilogue and tailcall handling in JIT

2020-09-18T02:55:30Z

This commit serves two things: 1) it optimizes BPF prologue/epilogue generation 2) it makes possible to have tailcalls within BPF subprogram Both points are related to each other since without 1), 2) could not be achieved. In [1], Alexei says: "The prologue will look like: nop5 xor eax,eax // two new bytes if bpf_tail_call() is used in this // function push rbp mov rbp, rsp sub rsp, rounded_stack_depth push rax // zero init tail_call counter variable number of push rbx,r13,r14,r15 Then bpf_tail_call will pop variable number rbx,.. and final 'pop rax' Then 'add rsp, size_of_current_stack_frame' jmp to next function and skip over 'nop5; xor eax,eax; push rpb; mov rbp, rsp' This way new function will set its own stack size and will init tail call counter with whatever value the parent had. If next function doesn't use bpf_tail_call it won't have 'xor eax,eax'. Instead it would need to have 'nop2' in there." Implement that suggestion. Since the layout of stack is changed, tail call counter handling can not rely anymore on popping it to rbx just like it have been handled for constant prologue case and later overwrite of rbx with actual value of rbx pushed to stack. Therefore, let's use one of the register (%rcx) that is considered to be volatile/caller-saved and pop the value of tail call counter in there in the epilogue. Drop the BUILD_BUG_ON in emit_prologue and in emit_bpf_tail_call_indirect where instruction layout is not constant anymore. Introduce new poke target, 'tailcall_bypass' to poke descriptor that is dedicated for skipping the register pops and stack unwind that are generated right before the actual jump to target program. For case when the target program is not present, BPF program will skip the pop instructions and nop5 dedicated for jmpq $target. An example of such state when only R6 of callee saved registers is used by program: ffffffffc0513aa1: e9 0e 00 00 00 jmpq 0xffffffffc0513ab4 ffffffffc0513aa6: 5b pop %rbx ffffffffc0513aa7: 58 pop %rax ffffffffc0513aa8: 48 81 c4 00 00 00 00 add $0x0,%rsp ffffffffc0513aaf: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) ffffffffc0513ab4: 48 89 df mov %rbx,%rdi When target program is inserted, the jump that was there to skip pops/nop5 will become the nop5, so CPU will go over pops and do the actual tailcall. One might ask why there simply can not be pushes after the nop5? In the following example snippet: ffffffffc037030c: 48 89 fb mov %rdi,%rbx (...) ffffffffc0370332: 5b pop %rbx ffffffffc0370333: 58 pop %rax ffffffffc0370334: 48 81 c4 00 00 00 00 add $0x0,%rsp ffffffffc037033b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) ffffffffc0370340: 48 81 ec 00 00 00 00 sub $0x0,%rsp ffffffffc0370347: 50 push %rax ffffffffc0370348: 53 push %rbx ffffffffc0370349: 48 89 df mov %rbx,%rdi ffffffffc037034c: e8 f7 21 00 00 callq 0xffffffffc0372548 There is the bpf2bpf call (at ffffffffc037034c) right after the tailcall and jump target is not present. ctx is in %rbx register and BPF subprogram that we will call into on ffffffffc037034c is relying on it, e.g. it will pick ctx from there. Such code layout is therefore broken as we would overwrite the content of %rbx with the value that was pushed on the prologue. That is the reason for the 'bypass' approach. Special care needs to be taken during the install/update/remove of tailcall target. In case when target program is not present, the CPU must not execute the pop instructions that precede the tailcall. To address that, the following states can be defined: A nop, unwind, nop B nop, unwind, tail C skip, unwind, nop D skip, unwind, tail A is forbidden (lead to incorrectness). The state transitions between tailcall install/update/remove will work as follows: First install tail call f: C->D->B(f) * poke the tailcall, after that get rid of the skip Update tail call f to f': B(f)->B(f') * poke the tailcall (poke->tailcall_target) and do NOT touch the poke->tailcall_bypass Remove tail call: B(f')->C(f') * poke->tailcall_bypass is poked back to jump, then we wait the RCU grace period so that other programs will finish its execution and after that we are safe to remove the poke->tailcall_target Install new tail call (f''): C(f')->D(f'')->B(f''). * same as first step This way CPU can never be exposed to "unwind, tail" state. Last but not least, when tailcalls get mixed with bpf2bpf calls, it would be possible to encounter the endless loop due to clearing the tailcall counter if for example we would use the tailcall3-like from BPF selftests program that would be subprogram-based, meaning the tailcall would be present within the BPF subprogram. This test, broken down to particular steps, would do: entry -> set tailcall counter to 0, bump it by 1, tailcall to func0 func0 -> call subprog_tail (we are NOT skipping the first 11 bytes of prologue and this subprogram has a tailcall, therefore we clear the counter...) subprog -> do the same thing as entry and then loop forever. To address this, the idea is to go through the call chain of bpf2bpf progs and look for a tailcall presence throughout whole chain. If we saw a single tail call then each node in this call chain needs to be marked as a subprog that can reach the tailcall. We would later feed the JIT with this info and: - set eax to 0 only when tailcall is reachable and this is the entry prog - if tailcall is reachable but there's no tailcall in insns of currently JITed prog then push rax anyway, so that it will be possible to propagate further down the call chain - finally if tailcall is reachable, then we need to precede the 'call' insn with mov rax, [rbp - (stack_depth + 8)] Tail call related cases from test_verifier kselftest are also working fine. Sample BPF programs that utilize tail calls (sockex3, tracex5) work properly as well. [1]: https://lore.kernel.org/bpf/20200517043227.2gpq22ifoq37ogst@ast-mbp.dhcp.thefacebook.com/ Suggested-by: Alexei Starovoitov Signed-off-by: Maciej Fijalkowski Signed-off-by: Alexei Starovoitov

bpf: rename poke descriptor's 'ip' member to 'tailcall_target'

2020-09-17T19:59:31Z

Reflect the actual purpose of poke->ip and rename it to poke->tailcall_target so that it will not the be confused with another poke target that will be introduced in next commit. While at it, do the same thing with poke->ip_stable - rename it to poke->tailcall_target_stable. Signed-off-by: Maciej Fijalkowski Signed-off-by: Alexei Starovoitov

bpf: Mutex protect used_maps array and count

2020-09-16T01:28:27Z

To support modifying the used_maps array, we use a mutex to protect the use of the counter and the array. The mutex is initialized right after the prog aux is allocated, and destroyed right before prog aux is freed. This way we guarantee it's initialized for both cBPF and eBPF. Signed-off-by: YiFei Zhu Signed-off-by: Stanislav Fomichev Signed-off-by: Alexei Starovoitov Acked-by: Andrii Nakryiko Cc: YiFei Zhu Link: https://lore.kernel.org/bpf/20200915234543.3220146-2-sdf@google.com

objtool: Rename frame.h -> objtool.h

2020-09-10T15:43:13Z

Header frame.h is getting more code annotations to help objtool analyze object files. Rename the file to objtool.h. [ jpoimboe: add objtool.h to MAINTAINERS ] Signed-off-by: Julien Thierry Signed-off-by: Josh Poimboeuf

bpf: Delete repeated words in comments

2020-08-07T16:57:24Z

Drop repeated words in kernel/bpf/: {has, the} Signed-off-by: Randy Dunlap Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200807033141.10437-1-rdunlap@infradead.org