linux/kernel/bpf/core.c, branch v5.8

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18Z

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

mm: remove the pgprot argument to __vmalloc

2020-06-02T17:59:11Z

The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it. Signed-off-by: Christoph Hellwig Signed-off-by: Andrew Morton Reviewed-by: Michael Kelley [hyperv] Acked-by: Gao Xiang [erofs] Acked-by: Peter Zijlstra (Intel) Acked-by: Wei Liu Cc: Christian Borntraeger Cc: Christophe Leroy Cc: Daniel Vetter Cc: David Airlie Cc: Greg Kroah-Hartman Cc: Haiyang Zhang Cc: Johannes Weiner Cc: "K. Y. Srinivasan" Cc: Laura Abbott Cc: Mark Rutland Cc: Minchan Kim Cc: Nitin Gupta Cc: Robin Murphy Cc: Sakari Ailus Cc: Stephen Hemminger Cc: Sumit Semwal Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Heiko Carstens Cc: Paul Mackerras Cc: Vasily Gorbik Cc: Will Deacon Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de Signed-off-by: Linus Torvalds

bpf: Fix spelling in comment explaining ARG1 in ___bpf_prog_run

2020-06-01T21:38:20Z

Change 'handeled' to 'handled'. Signed-off-by: Chris Packham Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200525230025.14470-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Alexei Starovoitov

bpf: Implement CAP_BPF

2020-05-15T15:29:41Z

Implement permissions as stated in uapi/linux/capability.h In order to do that the verifier allow_ptr_leaks flag is split into four flags and they are set as: env->allow_ptr_leaks = bpf_allow_ptr_leaks(); env->bypass_spec_v1 = bpf_bypass_spec_v1(); env->bypass_spec_v4 = bpf_bypass_spec_v4(); env->bpf_capable = bpf_capable(); The first three currently equivalent to perfmon_capable(), since leaking kernel pointers and reading kernel memory via side channel attacks is roughly equivalent to reading kernel memory with cap_perfmon. 'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions, subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the verifier, run time mitigations in bpf array, and enables indirect variable access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code by the verifier. That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN will have speculative checks done by the verifier and other spectre mitigation applied. Such networking BPF program will not be able to leak kernel pointers and will not be able to access arbitrary kernel memory. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200513230355.7858-3-alexei.starovoitov@gmail.com

crypto: lib/sha1 - rename "sha" to "sha1"

2020-05-08T05:32:17Z

The library implementation of the SHA-1 compression function is confusingly called just "sha_transform()". Alongside it are some "SHA_" constants and "sha_init()". Presumably these are left over from a time when SHA just meant SHA-1. But now there are also SHA-2 and SHA-3, and moreover SHA-1 is now considered insecure and thus shouldn't be used. Therefore, rename these functions and constants to make it very clear that they are for SHA-1. Also add a comment to make it clear that these shouldn't be used. For the extra-misleadingly named "SHA_MESSAGE_BYTES", rename it to SHA1_BLOCK_SIZE and define it to just '64' rather than '(512/8)' so that it matches the same definition in . This prepares for merging into . Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu

bpf: add bpf_ktime_get_boot_ns()

2020-04-26T16:43:05Z

On a device like a cellphone which is constantly suspending and resuming CLOCK_MONOTONIC is not particularly useful for keeping track of or reacting to external network events. Instead you want to use CLOCK_BOOTTIME. Hence add bpf_ktime_get_boot_ns() as a mirror of bpf_ktime_get_ns() based around CLOCK_BOOTTIME instead of CLOCK_MONOTONIC. Signed-off-by: Maciej Żenczykowski Signed-off-by: Alexei Starovoitov

bpf: Fix missing bpf_base_func_proto in cgroup_base_func_proto for CGROUP_NET=n

2020-04-26T15:53:13Z

linux-next build bot reported compile issue [1] with one of its configs. It looks like when we have CONFIG_NET=n and CONFIG_BPF{,_SYSCALL}=y, we are missing the bpf_base_func_proto definition (from net/core/filter.c) in cgroup_base_func_proto. I'm reshuffling the code a bit to make it work. The common helpers are moved into kernel/bpf/helpers.c and the bpf_base_func_proto is exported from there. Also, bpf_get_raw_cpu_id goes into kernel/bpf/core.c akin to existing bpf_user_rnd_u32. [1] https://lore.kernel.org/linux-next/CAKH8qBsBvKHswiX1nx40LgO+BGeTmb1NX8tiTttt_0uu6T3dCA@mail.gmail.com/T/#mff8b0c083314c68c2e2ef0211cb11bc20dc13c72 Fixes: 0456ea170cd6 ("bpf: Enable more helpers for BPF_PROG_TYPE_CGROUP_{DEVICE,SYSCTL,SOCKOPT}") Signed-off-by: Stanislav Fomichev Signed-off-by: Alexei Starovoitov Cc: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20200424235941.58382-1-sdf@google.com

bpf: Enable bpf cgroup hooks to retrieve cgroup v2 and ancestor id

2020-03-28T02:40:39Z

Enable the bpf_get_current_cgroup_id() helper for connect(), sendmsg(), recvmsg() and bind-related hooks in order to retrieve the cgroup v2 context which can then be used as part of the key for BPF map lookups, for example. Given these hooks operate in process context 'current' is always valid and pointing to the app that is performing mentioned syscalls if it's subject to a v2 cgroup. Also with same motivation of commit 7723628101aa ("bpf: Introduce bpf_skb_ancestor_cgroup_id helper") enable retrieval of ancestor from current so the cgroup id can be used for policy lookups which can then forbid connect() / bind(), for example. Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/d2a7ef42530ad299e3cbb245e6c12374b72145ef.1585323121.git.daniel@iogearbox.net

bpf: Add bpf_ksym_add/del functions

2020-03-13T19:49:52Z

Separating /proc/kallsyms add/del code and adding bpf_ksym_add/del functions for that. Moving bpf_prog_ksym_node_add/del functions to __bpf_ksym_add/del and changing their argument to 'struct bpf_ksym' object. This way we can call them for other bpf objects types like trampoline and dispatcher. Signed-off-by: Jiri Olsa Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200312195610.346362-10-jolsa@kernel.org Signed-off-by: Alexei Starovoitov

bpf: Add prog flag to struct bpf_ksym object

2020-03-13T19:49:52Z

Adding 'prog' bool flag to 'struct bpf_ksym' to mark that this object belongs to bpf_prog object. This change allows having bpf_prog objects together with other types (trampolines and dispatchers) in the single bpf_tree. It's used when searching for bpf_prog exception tables by the bpf_prog_ksym_find function, where we need to get the bpf_prog pointer. >From now we can safely add bpf_ksym support for trampoline or dispatcher objects, because we can differentiate them from bpf_prog objects. Signed-off-by: Jiri Olsa Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200312195610.346362-9-jolsa@kernel.org Signed-off-by: Alexei Starovoitov